Search   
MSDS 
:
 2,5-Dimethyl-1,5-hexadiene
CAS 
:
 627-58-7
SYNONYMS 
:
 Dimethallyl.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 627-58-7 |2,5-Dimethyl-1,5-hexadiene | 98% | 211-003-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. May be harmful if inhaled. Vapors may cause
dizziness or suffocation. May cause burning sensation in the chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Water may be ineffective. Material is
lighter than water and a fire may be spread by the use of water.
Containers may explode in the heat of a fire. Flammable liquid and
vapor. Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use with adequate ventilation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 627-58-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 116 deg C @760 mmHg
Freezing/Melting Point: -75 deg C
Autoignition Temperature: Not available.
Flash Point: 13 deg C ( 55.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble.
Specific Gravity/Density: 0.74
Molecular Formula: C8H14
Molecular Weight: 110.098

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 627-58-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,5-Dimethyl-1,5-hexadiene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 627-58-7: No information available.
Canada
CAS# 627-58-7 is listed on Canada's NDSL List.
CAS# 627-58-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 627-58-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/18/2000 Revision #4 Date: 9/25/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
FMOC-L-Tryptophan, 99% 35737-15-6
5-Acetylamido-2-chloroaniline, 98% 51867-83-5
3'-Aminoacetanilide, 98% 102-28-3
Cellulose Acetate, Average M.W. 52000 9004-35-7
FMOC-L-Methionine, 98% 71989-28-1
Methyl iodide 74-88-4
Polyvinylpyrrolidone Average M.W. 360.000 9003-39-8
Phenolphthalin 81-90-3
1H-Indole-3-Acetic Acid,99+% 87-51-4
Boc-L-Aspartic Acid 4-Benzylester, 99+% 7536-58-5
Phenosafranin 81-93-6
Bromotriethylgermane 1067-10-3
4,5-Dimethyl-2-Nitroaniline, 97% 6972-71-0
3-Methacryloyloxypropyltris(Trimethylsilyloxy)Silane, 98% 17096-07-0
Ammonium nitrate, reagent ACS, crystals 6484-52-2
Boc-L-Tryptophane, 97% 13139-14-5
3,4,5,6-Tetrabromo-o-cresol, 98% 576-55-6
Sodium Hydroxide Solution 2-4% 1310-73-2
3-(4-Bromobenzoyl)Propionic Acid 6340-79-0
Copper(II) nitrate, trihydrate, p.a. 3251-23-8
Sodium Molybdate (VI) Dihydrate, 99+% 7631-95-0
Glutaric Dialdehyde, 25% Solution in Water E.M. Grade, Purified 111-30-8
Glutaric Dialdehyde (50% in water) 111-30-8
Sulfuric acid, 1N standard solution 7664-93-9
Ethyl Eosin 21514-87-4
Sodium Hydroxide Solution 0.4 - 0.04% 1310-73-2
BOC-L-Proline, 99+% 15761-39-4
5-Fluorouridine, 99+% 316-46-1
Boc-L-Glutamine, 99+% 13726-85-7
(S)-(+)-2,2-Dimethyl-1,3-dioxolane-4- methanol, 98% 22323-82-6
Heptadecafluorononanoic Acid, 97% 375-95-1
2-(p-Chlorobenzyl)benzimidazole 5468-66-6
Lithium, Granular, Dry 7439-93-2
2-Amino-4,6-dimethylpyrimidine, 98% 767-15-7
trans-3-(3-Pyridyl)acrylic acid 19337-97-4
Pyronin B, certified 2150-48-3
Methyl 2-cyclopentanonecarboxylate 10472-24-9
8-Amino-2-naphthol, 98% 118-46-7
2,5-Dimethyl-1,5-hexadiene 627-58-7
Tetramethyltetraselenafulvalene 55259-49-9
Gallium(III) perchlorate, 50% solution in water 7732-18-5
1-Naphthyl phosphate calcium salt trihydrate 17805-69-5
4-Nitrobenzyl chloroformate, 97% 4457-32-3
(S)-3-Acetoxy-gamma-Butyrolactone, 95% 191403-65-3
4-Methoxyphenyl isocyanate, 99% 5416-93-3
N-Pivaloyl-o-toluidine 61495-04-3
N-Pivaloyl-o-Benzylaniline, 99% 85864-33-1
trans-4-Aminocyclohexanol, 97% 27489-62-9
D-(-)-Phenylglycinamide, 99% 0-01-1
2,6-Dichlorobenzylchloride, 97% 2014-83-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net