Search   
MSDS 
:
 4-Methoxyphenyl isocyanate, 99%
CAS 
:
 5416-93-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5416-93-3 |4-Methoxyphenyl isocyanate | 99.0 | 226-513-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 42/43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. May
cause sensitization by inhalation and skin contact.The toxicological
properties of this material have not been fully investigated.Moisture
sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. Lachrymator (substance which increases the flow of tears).
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. May cause severe
irritation and possible burns.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. May cause asthmatic attacks
due to allergic sensitization of the respiratory tract.
Chronic:
Chronic inhalation may cause effects similar to those of acute
inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog or
alcohol-resistant foam. Do NOT use straight streams of water. Most
foams will react with the material and release corrosive/toxic
gases.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Use water spray to disperse the
gas/vapor. A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 5416-93-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 106 - 110 deg C @ 16.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 98 deg C ( 208.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1510g/cm3
Molecular Formula: C8H7NO2
Molecular Weight: 149.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Water - alcohols - strong bases - amines - acids - heat - strong
oxidizing agents.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5416-93-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Methoxyphenyl isocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOCYANATES, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 42/43 May cause sensitization by inhalation and
skin contact.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5416-93-3: No information available.
Canada
CAS# 5416-93-3 is listed on Canada's NDSL List.
CAS# 5416-93-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5416-93-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
FMOC-L-Tryptophan, 99% 35737-15-6
5-Acetylamido-2-chloroaniline, 98% 51867-83-5
3'-Aminoacetanilide, 98% 102-28-3
Cellulose Acetate, Average M.W. 52000 9004-35-7
FMOC-L-Methionine, 98% 71989-28-1
Methyl iodide 74-88-4
Polyvinylpyrrolidone Average M.W. 360.000 9003-39-8
Phenolphthalin 81-90-3
1H-Indole-3-Acetic Acid,99+% 87-51-4
Boc-L-Aspartic Acid 4-Benzylester, 99+% 7536-58-5
Phenosafranin 81-93-6
Bromotriethylgermane 1067-10-3
4,5-Dimethyl-2-Nitroaniline, 97% 6972-71-0
3-Methacryloyloxypropyltris(Trimethylsilyloxy)Silane, 98% 17096-07-0
Ammonium nitrate, reagent ACS, crystals 6484-52-2
Boc-L-Tryptophane, 97% 13139-14-5
3,4,5,6-Tetrabromo-o-cresol, 98% 576-55-6
Sodium Hydroxide Solution 2-4% 1310-73-2
3-(4-Bromobenzoyl)Propionic Acid 6340-79-0
Copper(II) nitrate, trihydrate, p.a. 3251-23-8
Sodium Molybdate (VI) Dihydrate, 99+% 7631-95-0
Glutaric Dialdehyde, 25% Solution in Water E.M. Grade, Purified 111-30-8
Glutaric Dialdehyde (50% in water) 111-30-8
Sulfuric acid, 1N standard solution 7664-93-9
Ethyl Eosin 21514-87-4
Sodium Hydroxide Solution 0.4 - 0.04% 1310-73-2
BOC-L-Proline, 99+% 15761-39-4
5-Fluorouridine, 99+% 316-46-1
Boc-L-Glutamine, 99+% 13726-85-7
(S)-(+)-2,2-Dimethyl-1,3-dioxolane-4- methanol, 98% 22323-82-6
Heptadecafluorononanoic Acid, 97% 375-95-1
2-(p-Chlorobenzyl)benzimidazole 5468-66-6
Lithium, Granular, Dry 7439-93-2
2-Amino-4,6-dimethylpyrimidine, 98% 767-15-7
trans-3-(3-Pyridyl)acrylic acid 19337-97-4
Pyronin B, certified 2150-48-3
Methyl 2-cyclopentanonecarboxylate 10472-24-9
8-Amino-2-naphthol, 98% 118-46-7
2,5-Dimethyl-1,5-hexadiene 627-58-7
Tetramethyltetraselenafulvalene 55259-49-9
Gallium(III) perchlorate, 50% solution in water 7732-18-5
1-Naphthyl phosphate calcium salt trihydrate 17805-69-5
4-Nitrobenzyl chloroformate, 97% 4457-32-3
(S)-3-Acetoxy-gamma-Butyrolactone, 95% 191403-65-3
4-Methoxyphenyl isocyanate, 99% 5416-93-3
N-Pivaloyl-o-toluidine 61495-04-3
N-Pivaloyl-o-Benzylaniline, 99% 85864-33-1
trans-4-Aminocyclohexanol, 97% 27489-62-9
D-(-)-Phenylglycinamide, 99% 0-01-1
2,6-Dichlorobenzylchloride, 97% 2014-83-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net