**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 25086-29-7 |N-Vinylpyrrolidone/Styrene Copolymer | WT | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 25086-29-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Viscous liquid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 25086-29-7: UY5771200
LD50/LC50:
CAS# 25086-29-7: Oral, rat: LD50 = >40 gm/kg.
Carcinogenicity:
N-Vinylpyrrolidone/Styrene Copolymer -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 25086-29-7: No information available.
Canada
CAS# 25086-29-7 is listed on Canada's DSL List.
CAS# 25086-29-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 25086-29-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Mercury (II) Bromide
| 7789-47-1 |
|
2,3-Naphthalenedicarbonitrile, 98%
| 22856-30-0 |
|
6-Nitro-2-phenyl-4-quinolinol
| 56983-10-9 |
|
Mercury(II) chloride
| 7487-94-7 |
|
Mercury (II) Iodide
| 7774-29-0 |
|
Di-p-toluenesulfimide potassium salt
| 97888-41-0 |
|
Mercury(II) nitrate monohydrate
| 7783-34-8 |
|
2-Amino-6,7-Dimethyl-4-Hydroxy-5,6,7,8-Tetrahydropteridine
| 945-43-7 |
|
D-Maltose
| 69-79-4 |
|
Mercury (II) Oxide
| 21908-53-2 |
|
2,4-Difluorotoluene, 98%
| 452-76-6 |
|
2-(3-Thienyl)ethanol, 99%
| 13781-67-4 |
|
1,4-Diaminocyclohexane
| 2615-25-0 |
|
Mercury (II) Sulfate
| 7783-35-9 |
|
Diethylstilbestrol, 99%
| 56-53-1 |
|
Sodium Biphenyl, Reagent, 20 % w/w Solution in Diethylene Glycol
| 112-36-7 |
|
3-Fluorobenzylamine, 97%
| 100-82-3 |
|
Furan, stabilized with 0.025-0.04% BHT
| 110-00-9 |
|
trans-2-Dodecenal, 90-96% (gc)
| 4826-62-4 |
|
2-Chloro-2-methylbutane, 95% (gc)
| 594-36-5 |
|
2-Oxazolidone, 98%
| 497-25-6 |
|
Boron Trifluoride (12% in methanol)
| 67-56-1 |
|
Decyl Aldehyde, 95%
| 112-31-2 |
|
2-Aminobenzotrifluoride, 99% (GC)
| 88-17-5 |
|
N-Vinylpyrrolidone/Styrene Copolymer, 40 wt% Aqueous Emulsion
| 25086-29-7 |
|
1,1'-Bis(chloromercuri)ferrocene, tech.
| 12145-90-3 |
|
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione 99%, stabilized with 100
| 128-37-0 |
|
Cyclopropyl 2-thienyl ketone
| 6193-47-1 |
|
Mercury
| 7439-97-6 |
|
Decafluorobiphenyl, 98+%
| 434-90-2 |
|
n-Octyl-monooxyethylene
| 10020-43-6 |
|
N-Tert.-Butyl-Alpha-Phenylnitrone,98%
| 3376-24-7 |
|
4-Dimethylaminocinnamonitrile (Mixture of Cis and Trans)
| 32444-63-6 |
|
2-Pyrazinecarboxylic acid, 99%
| 98-97-5 |
|
5-Benzyloxyindole, CHR
| 1215-59-4 |
|
4-Bromobutyric acid, 98%
| 2623-87-2 |
|
Mercury thiocyanatocobaltate(ii), 99%
| 27685-51-4 |
|
Pbd, Scintillation Grade
| 852-38-0 |
|
4-Ethenyl-1,3-Dioxolan-2-One
| 4427-96-7 |
|
2,2,6-Trimethylcyclohexanone, 98.5+% (GC)
| 2408-37-9 |
|
DL-4-Chlorophenylalanine ethyl ester hydrochloride
| 52031-05-7 |
|
p-Methoxyphenylacetone, 98+%
| 122-84-9 |
|
1-Hexen-3-ol, 98%
| 4798-44-1 |
|
4-Fluorothiophenol, 97%
| 371-42-6 |
|
3',5'-Diacetylthymidine, 99+%
| 6979-97-1 |
|
Oxanilide, 99% (UV-Vis)
| 620-81-5 |
|
4-Methoxysalicylic acid, 99%
| 2237-36-7 |
|
Ethyl 3-mercaptopropionate, 99%
| 5466-06-8 |
|
Methyl acetate
| 79-20-9 |
|
Allylacetoacetate, 98%
| 1118-84-9 |
|
|