Search   
MSDS 
:
 Cyclopropyl 2-thienyl ketone
CAS 
:
 6193-47-1
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6193-47-1 |Cyclopropyl 2-thienyl ketone | ca.100 | 228-247-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause dermatitis. May be harmful if
absorbed through the skin. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. May be harmful if swallowed.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Aspiration may lead to pulmonary edema. May be harmful
if inhaled. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Dark room.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 6193-47-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 92 deg C ( 197.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density: 1.1700g/cm3
Molecular Formula: C8H8OS
Molecular Weight: 152.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6193-47-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cyclopropyl 2-thienyl ketone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6193-47-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6193-47-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6193-47-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Mercury (II) Bromide 7789-47-1
2,3-Naphthalenedicarbonitrile, 98% 22856-30-0
6-Nitro-2-phenyl-4-quinolinol 56983-10-9
Mercury(II) chloride 7487-94-7
Mercury (II) Iodide 7774-29-0
Di-p-toluenesulfimide potassium salt 97888-41-0
Mercury(II) nitrate monohydrate 7783-34-8
2-Amino-6,7-Dimethyl-4-Hydroxy-5,6,7,8-Tetrahydropteridine 945-43-7
D-Maltose 69-79-4
Mercury (II) Oxide 21908-53-2
2,4-Difluorotoluene, 98% 452-76-6
2-(3-Thienyl)ethanol, 99% 13781-67-4
1,4-Diaminocyclohexane 2615-25-0
Mercury (II) Sulfate 7783-35-9
Diethylstilbestrol, 99% 56-53-1
Sodium Biphenyl, Reagent, 20 % w/w Solution in Diethylene Glycol 112-36-7
3-Fluorobenzylamine, 97% 100-82-3
Furan, stabilized with 0.025-0.04% BHT 110-00-9
trans-2-Dodecenal, 90-96% (gc) 4826-62-4
2-Chloro-2-methylbutane, 95% (gc) 594-36-5
2-Oxazolidone, 98% 497-25-6
Boron Trifluoride (12% in methanol) 67-56-1
Decyl Aldehyde, 95% 112-31-2
2-Aminobenzotrifluoride, 99% (GC) 88-17-5
N-Vinylpyrrolidone/Styrene Copolymer, 40 wt% Aqueous Emulsion 25086-29-7
1,1'-Bis(chloromercuri)ferrocene, tech. 12145-90-3
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione 99%, stabilized with 100 128-37-0
Cyclopropyl 2-thienyl ketone 6193-47-1
Mercury 7439-97-6
Decafluorobiphenyl, 98+% 434-90-2
n-Octyl-monooxyethylene 10020-43-6
N-Tert.-Butyl-Alpha-Phenylnitrone,98% 3376-24-7
4-Dimethylaminocinnamonitrile (Mixture of Cis and Trans) 32444-63-6
2-Pyrazinecarboxylic acid, 99% 98-97-5
5-Benzyloxyindole, CHR 1215-59-4
4-Bromobutyric acid, 98% 2623-87-2
Mercury thiocyanatocobaltate(ii), 99% 27685-51-4
Pbd, Scintillation Grade 852-38-0
4-Ethenyl-1,3-Dioxolan-2-One 4427-96-7
2,2,6-Trimethylcyclohexanone, 98.5+% (GC) 2408-37-9
DL-4-Chlorophenylalanine ethyl ester hydrochloride 52031-05-7
p-Methoxyphenylacetone, 98+% 122-84-9
1-Hexen-3-ol, 98% 4798-44-1
4-Fluorothiophenol, 97% 371-42-6
3',5'-Diacetylthymidine, 99+% 6979-97-1
Oxanilide, 99% (UV-Vis) 620-81-5
4-Methoxysalicylic acid, 99% 2237-36-7
Ethyl 3-mercaptopropionate, 99% 5466-06-8
Methyl acetate 79-20-9
Allylacetoacetate, 98% 1118-84-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net