Search   
MSDS 
:
 trans-2-Dodecenal, 90-96% (gc)
CAS 
:
 4826-62-4
SYNONYMS 
:
 Beta-Octylacrolein
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4826-62-4 |trans-2-Dodecenal | 90-96 | 225-402-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to skin.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes severe skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Keep containers tightly
closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4826-62-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 93 deg C @ .50mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 129 deg C ( 264.20 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .8350g/cm3
Molecular Formula: C12H22O
Molecular Weight: 182.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4826-62-4: JR5150000
LD50/LC50:
CAS# 4826-62-4: Draize test, rabbit, skin: 500 mg/24H Severe; Oral,
rat: LD50 = >5 gm/kg.
Carcinogenicity:
trans-2-Dodecenal -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 38 Irritating to skin.
Safety Phrases:
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 4826-62-4: No information available.
Canada
CAS# 4826-62-4 is listed on Canada's DSL List.
CAS# 4826-62-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4826-62-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Mercury (II) Bromide 7789-47-1
2,3-Naphthalenedicarbonitrile, 98% 22856-30-0
6-Nitro-2-phenyl-4-quinolinol 56983-10-9
Mercury(II) chloride 7487-94-7
Mercury (II) Iodide 7774-29-0
Di-p-toluenesulfimide potassium salt 97888-41-0
Mercury(II) nitrate monohydrate 7783-34-8
2-Amino-6,7-Dimethyl-4-Hydroxy-5,6,7,8-Tetrahydropteridine 945-43-7
D-Maltose 69-79-4
Mercury (II) Oxide 21908-53-2
2,4-Difluorotoluene, 98% 452-76-6
2-(3-Thienyl)ethanol, 99% 13781-67-4
1,4-Diaminocyclohexane 2615-25-0
Mercury (II) Sulfate 7783-35-9
Diethylstilbestrol, 99% 56-53-1
Sodium Biphenyl, Reagent, 20 % w/w Solution in Diethylene Glycol 112-36-7
3-Fluorobenzylamine, 97% 100-82-3
Furan, stabilized with 0.025-0.04% BHT 110-00-9
trans-2-Dodecenal, 90-96% (gc) 4826-62-4
2-Chloro-2-methylbutane, 95% (gc) 594-36-5
2-Oxazolidone, 98% 497-25-6
Boron Trifluoride (12% in methanol) 67-56-1
Decyl Aldehyde, 95% 112-31-2
2-Aminobenzotrifluoride, 99% (GC) 88-17-5
N-Vinylpyrrolidone/Styrene Copolymer, 40 wt% Aqueous Emulsion 25086-29-7
1,1'-Bis(chloromercuri)ferrocene, tech. 12145-90-3
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione 99%, stabilized with 100 128-37-0
Cyclopropyl 2-thienyl ketone 6193-47-1
Mercury 7439-97-6
Decafluorobiphenyl, 98+% 434-90-2
n-Octyl-monooxyethylene 10020-43-6
N-Tert.-Butyl-Alpha-Phenylnitrone,98% 3376-24-7
4-Dimethylaminocinnamonitrile (Mixture of Cis and Trans) 32444-63-6
2-Pyrazinecarboxylic acid, 99% 98-97-5
5-Benzyloxyindole, CHR 1215-59-4
4-Bromobutyric acid, 98% 2623-87-2
Mercury thiocyanatocobaltate(ii), 99% 27685-51-4
Pbd, Scintillation Grade 852-38-0
4-Ethenyl-1,3-Dioxolan-2-One 4427-96-7
2,2,6-Trimethylcyclohexanone, 98.5+% (GC) 2408-37-9
DL-4-Chlorophenylalanine ethyl ester hydrochloride 52031-05-7
p-Methoxyphenylacetone, 98+% 122-84-9
1-Hexen-3-ol, 98% 4798-44-1
4-Fluorothiophenol, 97% 371-42-6
3',5'-Diacetylthymidine, 99+% 6979-97-1
Oxanilide, 99% (UV-Vis) 620-81-5
4-Methoxysalicylic acid, 99% 2237-36-7
Ethyl 3-mercaptopropionate, 99% 5466-06-8
Methyl acetate 79-20-9
Allylacetoacetate, 98% 1118-84-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net