Search   
MSDS 
:
 Cyclopropyl Carbinol, 99%
CAS 
:
 2516-33-8
SYNONYMS 
:
 Cyclopropanemethanol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2516-33-8 |Cyclopropyl Carbinol | 99 | 219-735-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 10 20/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation and if swallowed.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause irritation and dermatitis. May
cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause burning sensation in the chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2516-33-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: alcohol-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 4.04 MPA 20.00 deg
Boiling Point: 123 - 124 deg C @ 738.00mmHg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: 310 deg C ( 590.00 deg F)
Flash Point: 35 deg C ( 95.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density: .8900g/cm3
Molecular Formula: C4H8O
Molecular Weight: 72.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2516-33-8: GZ2212250
LD50/LC50:
Not available.
Carcinogenicity:
Cyclopropyl Carbinol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 10 Flammable.
R 20/22 Harmful by inhalation and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2516-33-8: 1
Canada
CAS# 2516-33-8 is listed on Canada's NDSL List.
CAS# 2516-33-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2516-33-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Lutidine, 99% 108-48-5
GIRARD REAGENT D, 98% (TITR.) 539-64-0
4,4'-Azo-Bis-(4-Cyanovaleric Acid), 97% 2638-94-0
4-Hydroxybenzaldehyde, 99% 123-08-0
2-Phenylbenzimidazole, P.A. 716-79-0
Butyryl Chloride, 98% 141-75-3
Iminodiacetic Acid, Disodium Salt Monohydrate, 97% 17593-73-6
Pybop, 99% 128625-52-5
1,6-Diphenyl-1,3,5-Hexatriene, 98% 1720-32-7
2-Methyl-2-propyl-1,3-propanediol,99% 78-26-2
Ammonium sulfobetaine - 2
4-Bromophenyl isocyanate 2493-02-9
2-(Methylamino)ethanol, 99% 109-83-1
5-Chloro-2-methylbenzothiazole 1006-99-1
Succinic Acid 2,2-Dimethylhydrazide, 99% 1596-84-5
(s)-(-)-Propylene Oxide, 99% 16088-62-3
2-Methylaminoethanol, 97% (titr.) 109-83-1
Ethyl diethoxyacetate, 99% 6065-82-3
9-BBN, 0.5M solution in THF 109-99-9
9-BBN, 0.5M Solution in Hexane 110-54-3
Rutin, 97.0-102.0% (by Gravimetry on the Dry Substance) 153-18-4
DL-Isoleucine, 99%, Containing up to 10% of DL-Allo-Isoleucine 443-79-8
EPPS, 99% 16052-06-5
2-Butyne-1,4-Diol, 99% 110-65-6
4,4'-Diantipyrylmethane Monohydrate, 97% 1251-85-0
Cis,cis-1,5-cyclooctadiene, 99+%, stab. with 50-200ppm bht 111-78-4
N-Methylaniline, 98% 100-61-8
Ethylamine, solution in water, 70 wt. % 75-04-7
Benzonitrile, 99% 100-47-0
4-Chlorobenzonitrile, 99% 623-03-0
Methyl 4-Formylbenzoate, 99% 1571-08-0
Diphenylacetic Acid, 99+% 117-34-0
Trithiocyanuric acid, 95% 638-16-4
Ammonium nitrate, p.a. 6484-52-2
Potassium borohydride, 98% 13762-51-1
8-Benzyltheophylline, 99% 2879-15-4
Arsenic(III) chloride 7784-34-1
Dowex 50x8-100 Ion-Exchange Resin 11119-67-8
Dowex 50x8-400 Ion-Exchange Resin 11119-67-8
Cyclopropyl Carbinol, 99% 2516-33-8
O-Tolidine, 99% (Titr.) 119-93-7
Diethyl Pimelate, 99% 2050-20-6
11-Bromoundecanoic acid, 99+% 2834-05-1
11-Bromoundecanoic acid, 98% (gc) 2834-05-1
Methyl vinyl ether/maleic acid copolymer, high molecular weight 25153-40-6
Tri-n-octylphosphine oxide, 99% 78-50-2
Theophylline, Anhydrous, 99+% (Titr., on Dry Substance) 58-55-9
DL-Atrolactic Acid Hemihydrate, 98% 515-30-0
2-Octanone, 99+% (GC) 111-13-7
Poly(Ethylene Glycol), Average M.W. 200 25322-68-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net