Search   
MSDS 
:
 Ammonium sulfobetaine - 2
CAS 
:
 
SYNONYMS 
:
 N-[2-[Acetyl(3-sulfopropyl)amino]ethyl]N,N-dimethyldodecanaminium     hydroxide; inner salt
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: 50 g/l in water at 25 degr.c.soluble in
Specific Gravity/Density:
Molecular Formula: C27H56N2O4S
Molecular Weight: 504.80

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants, exposure to
moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
No data
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/14/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Lutidine, 99% 108-48-5
GIRARD REAGENT D, 98% (TITR.) 539-64-0
4,4'-Azo-Bis-(4-Cyanovaleric Acid), 97% 2638-94-0
4-Hydroxybenzaldehyde, 99% 123-08-0
2-Phenylbenzimidazole, P.A. 716-79-0
Butyryl Chloride, 98% 141-75-3
Iminodiacetic Acid, Disodium Salt Monohydrate, 97% 17593-73-6
Pybop, 99% 128625-52-5
1,6-Diphenyl-1,3,5-Hexatriene, 98% 1720-32-7
2-Methyl-2-propyl-1,3-propanediol,99% 78-26-2
Ammonium sulfobetaine - 2
4-Bromophenyl isocyanate 2493-02-9
2-(Methylamino)ethanol, 99% 109-83-1
5-Chloro-2-methylbenzothiazole 1006-99-1
Succinic Acid 2,2-Dimethylhydrazide, 99% 1596-84-5
(s)-(-)-Propylene Oxide, 99% 16088-62-3
2-Methylaminoethanol, 97% (titr.) 109-83-1
Ethyl diethoxyacetate, 99% 6065-82-3
9-BBN, 0.5M solution in THF 109-99-9
9-BBN, 0.5M Solution in Hexane 110-54-3
Rutin, 97.0-102.0% (by Gravimetry on the Dry Substance) 153-18-4
DL-Isoleucine, 99%, Containing up to 10% of DL-Allo-Isoleucine 443-79-8
EPPS, 99% 16052-06-5
2-Butyne-1,4-Diol, 99% 110-65-6
4,4'-Diantipyrylmethane Monohydrate, 97% 1251-85-0
Cis,cis-1,5-cyclooctadiene, 99+%, stab. with 50-200ppm bht 111-78-4
N-Methylaniline, 98% 100-61-8
Ethylamine, solution in water, 70 wt. % 75-04-7
Benzonitrile, 99% 100-47-0
4-Chlorobenzonitrile, 99% 623-03-0
Methyl 4-Formylbenzoate, 99% 1571-08-0
Diphenylacetic Acid, 99+% 117-34-0
Trithiocyanuric acid, 95% 638-16-4
Ammonium nitrate, p.a. 6484-52-2
Potassium borohydride, 98% 13762-51-1
8-Benzyltheophylline, 99% 2879-15-4
Arsenic(III) chloride 7784-34-1
Dowex 50x8-100 Ion-Exchange Resin 11119-67-8
Dowex 50x8-400 Ion-Exchange Resin 11119-67-8
Cyclopropyl Carbinol, 99% 2516-33-8
O-Tolidine, 99% (Titr.) 119-93-7
Diethyl Pimelate, 99% 2050-20-6
11-Bromoundecanoic acid, 99+% 2834-05-1
11-Bromoundecanoic acid, 98% (gc) 2834-05-1
Methyl vinyl ether/maleic acid copolymer, high molecular weight 25153-40-6
Tri-n-octylphosphine oxide, 99% 78-50-2
Theophylline, Anhydrous, 99+% (Titr., on Dry Substance) 58-55-9
DL-Atrolactic Acid Hemihydrate, 98% 515-30-0
2-Octanone, 99+% (GC) 111-13-7
Poly(Ethylene Glycol), Average M.W. 200 25322-68-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net