Search   
MSDS 
:
 p-Morpholinoaniline, 98+%
CAS 
:
 2524-67-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2524-67-6 |4-Morpholinoaniline | 98.0+ | 219-760-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 2524-67-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: purple - light red to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 132 - 135 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H14N2O
Molecular Weight: 178.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, chloroformates, strong
oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2524-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Morpholinoaniline -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 2524-67-6: No information available.
Canada
CAS# 2524-67-6 is listed on Canada's NDSL List.
CAS# 2524-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2524-67-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/09/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Isothiocyanatobenzoic acid, 98% 2131-62-6
p-Tolyl chlorothionoformate, 98% 937-63-3
Nordihydroguaiaretic acid, 95% 500-38-9
tert-Butyl vinyl ether, stabilized, 98% 926-02-3
2,4-Dimethylquinoline, 97% 1198-37-4
1-Propanephosphonic acid cyclic anhydride, solution in ethyl acetate 141-78-6
1-Propanephosphonic acid cyclic anhydride, solution in 68-12-2
Dess-Martin-periodinane 87413-09-0
Tris(tert-butylimido)osmium oxide 63174-16-3
Bis(tert-butylimido)osmium dioxide 63174-13-0
(tert-Butylimido)osmium trioxide 50381-48-1
2-Naphthoyl chloride 2243-83-6
(4-Methoxybenzyl)triphenylphosphonium bromide 3462-97-3
Dl-3-amino butyric acid, 97% 2835-82-7
meso-1,2-Bis(4-chlorophenyl)ethylenediamine 74641-30-8
Meso-1,2-bis(4-fluorophenyl)ethylenediamine, 98% 50648-93-6
Meso-1,2-bis(p-tolyl)ethylenediamine, 98% 50764-59-5
Meso-1,2-bis(4-methoxyphenyl)ethylenediamine, 98% 58520-45-9
Meso-1,2-bis(1-naphthyl)ethylenediamine, 99% 117106-39-5
Triethanolamine triacetate, 95% 3002-18-4
2,6-Difluorophenylacetone 101712-20-3
2-Fluoroethanol 371-62-0
Bismuth oxychloride, 99.99% 7787-59-9
Iron (III) Chloride Anhydrous 7705-08-0
Aluminium isopropoxide 555-31-7
p-Morpholinoaniline, 98+% 2524-67-6
Iodine pentoxide 12029-98-0
Cobalt(II) oxide 1307-96-6
Lithium hydroxide anhydrous, 98% 1310-65-2
N-BOC-(1,4'-bipiperidine)-4'-carboxamide 0-01-1
Methyl 3,4-Dimethoxybenzoate, 98+% 2150-38-1
bis(1,5-Cyclooctadiene)rhodium(i) tetrafluoroborate 35138-22-8
bis(Pentafluorophenyl) carbonate, 98% 59483-84-0
(r)-(1-Aminopropyl)phosphonic acid 98049-00-4
(s)-(1-aminopropyl)phosphonic acid 98048-99-8
Iron(III) chloride hexahydrate 7705-08-0
(1R)-(+)-(1-Amino-2-methylpropyl)phosphonic acid 66254-56-6
(1S)-(-)-(1-Amino-2-methylpropyl)phosphonic acid 66254-55-5
Tris(2,5-dimethylphenyl)phosphine 115034-38-3
Tris(3,5-dimethylphenyl)phosphine 69227-47-0
l-Tryptophan ethyl ester hydrochloride, 99% 2899-28-7
L-Tryptophan methyl ester hydrochloride, 98% 7524-52-9
L-Aspartic acid dimethyl ester hydrochloride, 99% 32213-95-9
Iron Oxide 1317-61-9
l-Threonine methyl ester hydrochloride 39994-75-7
l-Arginine methyl ester dihydrochloride, 98% 26340-89-6
n-Acetyl-l-proline, 99% 68-95-1
tert-Butyl peroxybenzoate, 98% 614-45-9
1,1'-Sulfonyldiimidazole 7189-69-7
2,3-Dichloropyrazine 4858-85-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net