Search   
MSDS 
:
 p-Tolyl chlorothionoformate, 98%
CAS 
:
 937-63-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 937-63-3 |p-Tolyl chlorothionoformate | 98% | 213-333-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 29 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with water liberates toxic gas. Causes burns.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water Reactive. Material will react with water and
may release a flammable and/or toxic gas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Do not expose spill to water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not allow water to get into the container because of violent
reaction. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Do not allow contact with water. Use
only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 937-63-3:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 245 deg C @760mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 96 deg C ( 204.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.210
Molecular Formula: C8H7ClOS
Molecular Weight: 186.66

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, sulfur oxides
(SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 937-63-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
p-Tolyl chlorothionoformate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 29 Contact with water liberates toxic gas.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 937-63-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 937-63-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 937-63-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Isothiocyanatobenzoic acid, 98% 2131-62-6
p-Tolyl chlorothionoformate, 98% 937-63-3
Nordihydroguaiaretic acid, 95% 500-38-9
tert-Butyl vinyl ether, stabilized, 98% 926-02-3
2,4-Dimethylquinoline, 97% 1198-37-4
1-Propanephosphonic acid cyclic anhydride, solution in ethyl acetate 141-78-6
1-Propanephosphonic acid cyclic anhydride, solution in 68-12-2
Dess-Martin-periodinane 87413-09-0
Tris(tert-butylimido)osmium oxide 63174-16-3
Bis(tert-butylimido)osmium dioxide 63174-13-0
(tert-Butylimido)osmium trioxide 50381-48-1
2-Naphthoyl chloride 2243-83-6
(4-Methoxybenzyl)triphenylphosphonium bromide 3462-97-3
Dl-3-amino butyric acid, 97% 2835-82-7
meso-1,2-Bis(4-chlorophenyl)ethylenediamine 74641-30-8
Meso-1,2-bis(4-fluorophenyl)ethylenediamine, 98% 50648-93-6
Meso-1,2-bis(p-tolyl)ethylenediamine, 98% 50764-59-5
Meso-1,2-bis(4-methoxyphenyl)ethylenediamine, 98% 58520-45-9
Meso-1,2-bis(1-naphthyl)ethylenediamine, 99% 117106-39-5
Triethanolamine triacetate, 95% 3002-18-4
2,6-Difluorophenylacetone 101712-20-3
2-Fluoroethanol 371-62-0
Bismuth oxychloride, 99.99% 7787-59-9
Iron (III) Chloride Anhydrous 7705-08-0
Aluminium isopropoxide 555-31-7
p-Morpholinoaniline, 98+% 2524-67-6
Iodine pentoxide 12029-98-0
Cobalt(II) oxide 1307-96-6
Lithium hydroxide anhydrous, 98% 1310-65-2
N-BOC-(1,4'-bipiperidine)-4'-carboxamide 0-01-1
Methyl 3,4-Dimethoxybenzoate, 98+% 2150-38-1
bis(1,5-Cyclooctadiene)rhodium(i) tetrafluoroborate 35138-22-8
bis(Pentafluorophenyl) carbonate, 98% 59483-84-0
(r)-(1-Aminopropyl)phosphonic acid 98049-00-4
(s)-(1-aminopropyl)phosphonic acid 98048-99-8
Iron(III) chloride hexahydrate 7705-08-0
(1R)-(+)-(1-Amino-2-methylpropyl)phosphonic acid 66254-56-6
(1S)-(-)-(1-Amino-2-methylpropyl)phosphonic acid 66254-55-5
Tris(2,5-dimethylphenyl)phosphine 115034-38-3
Tris(3,5-dimethylphenyl)phosphine 69227-47-0
l-Tryptophan ethyl ester hydrochloride, 99% 2899-28-7
L-Tryptophan methyl ester hydrochloride, 98% 7524-52-9
L-Aspartic acid dimethyl ester hydrochloride, 99% 32213-95-9
Iron Oxide 1317-61-9
l-Threonine methyl ester hydrochloride 39994-75-7
l-Arginine methyl ester dihydrochloride, 98% 26340-89-6
n-Acetyl-l-proline, 99% 68-95-1
tert-Butyl peroxybenzoate, 98% 614-45-9
1,1'-Sulfonyldiimidazole 7189-69-7
2,3-Dichloropyrazine 4858-85-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net