Search   
MSDS 
:
 Triphenylcarbenium tetrafluoroborate
CAS 
:
 341-02-6
SYNONYMS 
:
 Trityl fluoroborate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 341-02-6 |Triphenylcarbenium tetrafluoroborate | ca. 100 | 206-433-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.Light sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. May cause abdominal pain, nausea, vomiting, and
inflammation of the gums and mouth.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Use with adequate ventilation. Use only in a chemical fume
hood. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Keep under a nitrogen blanket. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 341-02-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: gold-tan to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 205 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C19H15BF4
Molecular Weight: 330.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, exposure to moist air or water.
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas, oxides of
boron.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 341-02-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylcarbenium tetrafluoroborate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 341-02-6: No information available.
Canada
CAS# 341-02-6 is listed on Canada's NDSL List.
CAS# 341-02-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 341-02-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/04/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromoethylamine Hydrobromide, 98+ % 2576-47-8
5-Methyl-S-Triazolo(1,5-a)Pyrimidin-7-Ol 98% 2503-56-2
2-Amino-1-Propene-1,1,3-Tricarbonitrile, 97% 868-54-2
6-Ethoxy-1,2,3,4-Tetrahydro-2,2,4-Tri-Methylquinoline, 97% 16489-90-0
Tetramethylpyrazine, 98% 1124-11-4
Methyl 4-(chloroformyl)-butyrate 98 % 1501-26-4
o-Nitrophenyl-beta-D-thiogalactopyranoside 1158-17-4
Dichloromethylsilane, 97% 75-54-7
Quinidine anhydrous, ca.95%, remainder dihydroquinidine 56-54-2
Coumarin 152, Laser Grade 53518-14-2
o-Nitrophenol (pract), 95% (uv-vis) 88-75-5
5-Nitroso-8-quinolinol 3565-26-2
2,4,6-Tri-Tert-Butylnitrosobenzene, 99% 24973-59-9
Calix(5)arene
Triphenylcarbenium tetrafluoroborate 341-02-6
3-Exo-Aminobicyclo??2.2.1??Heptane-2-Exo-Carboxylic Acid, 98% 88330-32-9
6-Nitroquinoline, 98% 613-50-3
2,2-Dichloropentanal, 92% 41718-50-7
1-Ethoxynaphthalene, 97% 5328-01-8
2,5-Difluoronitrobenzene, 99% 364-74-9
1,4-Cyclohexanedimethanol 99%, (Mixture of Cis and Trans) 105-08-8
(S,S)-(-)-1,2-Diphenyl-1,2-Ethanediol, 98+% 2325-10-2
3-Bromotoluene, 99% 591-17-3
3-Carboxypropyl disulfide, 97% 2906-60-7
Orange (II) (Cert) 633-96-5
Glycylglycylglycylglycine, 97% 637-84-3
1,5-Hexadien-3-Ol, 95% 924-41-4
Lactic acid lithium salt, 99% (titr.) 867-55-0
Stearoyl chloride, tech. 112-67-4
Pentyl Ether, 99% (GC) 693-65-2
10-Methyl-9(10H)-acridone, 98% 719-54-0
4-Methyl-1-pentanol, 99% 626-89-1
2,3-Dimethyl-2-Butene, 98% 563-79-1
Ethyl 4-Hydroxybenzoate, 99% 120-47-8
2-Cyclohexen-1-One, 97% 930-68-7
2-Methylhippuric acid, 98% 42013-20-7
4-(Trifluoromethoxy)aniline, 99+% (titr.) 461-82-5
(1S,2S)-(-)-1,2-Diphenyl-1,2-Ethanediamine, 99% (99% e.e.) 35132-20-8
D-(-)-Arabinose, P.A. 28697-53-2
Hoechst 33342 23491-52-3
Sucrose Octaacetate, 98.0-100.5% (on Dry Substance) 126-14-7
1-(2-Pyridyl)piperazine, 98% 34803-66-2
(1R)-(+)-Isomenthol, 99% 23283-97-8
1,2,4,5-Tetrachlorobenzene, 98% 95-94-3
R-(-)1,1'-Binaphthyl-2,2'-Diyl Hydrogen Phosphate, 99% 39648-67-4
(+)-(2-Methylbutyl)benzene, 99% (GC) 40560-30-3
3,4,5-Trimethoxybenzyl alcohol, 97% 3840-31-1
4-Tert.-amylcyclohexanol, 99+%, mixture of cis and trans 5349-51-9
4-(4-Chlorophenylmethyl)-6,7-dimethoxy- isoquinoline methanesulfonate 61189-88-6
Drierite, 4 mesh, without indicator 7778-18-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net