Search   
MSDS 
:
 1-(2-Pyridyl)piperazine, 98%
CAS 
:
 34803-66-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 34803-66-2 |1-(2-Pyridyl)piperazine | 98 | 252-220-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Use with adequate ventilation. Avoid
breathing vapor or mist.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 34803-66-2:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless to pale yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 293 deg C @ 760 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: >500 g/l (20C)
Specific Gravity/Density: 1.070 g/ml
Molecular Formula: C9H13N3
Molecular Weight: 163.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Excess heat.
Incompatibilities with Other Materials:
Acid chlorides, acid anhydrides, strong oxidizing agents, strong
acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 34803-66-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-(2-Pyridyl)piperazine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28B After contact with skin, wash immediately with
plenty of water and soap.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 34803-66-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 34803-66-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 34803-66-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 5/02/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromoethylamine Hydrobromide, 98+ % 2576-47-8
5-Methyl-S-Triazolo(1,5-a)Pyrimidin-7-Ol 98% 2503-56-2
2-Amino-1-Propene-1,1,3-Tricarbonitrile, 97% 868-54-2
6-Ethoxy-1,2,3,4-Tetrahydro-2,2,4-Tri-Methylquinoline, 97% 16489-90-0
Tetramethylpyrazine, 98% 1124-11-4
Methyl 4-(chloroformyl)-butyrate 98 % 1501-26-4
o-Nitrophenyl-beta-D-thiogalactopyranoside 1158-17-4
Dichloromethylsilane, 97% 75-54-7
Quinidine anhydrous, ca.95%, remainder dihydroquinidine 56-54-2
Coumarin 152, Laser Grade 53518-14-2
o-Nitrophenol (pract), 95% (uv-vis) 88-75-5
5-Nitroso-8-quinolinol 3565-26-2
2,4,6-Tri-Tert-Butylnitrosobenzene, 99% 24973-59-9
Calix(5)arene
Triphenylcarbenium tetrafluoroborate 341-02-6
3-Exo-Aminobicyclo??2.2.1??Heptane-2-Exo-Carboxylic Acid, 98% 88330-32-9
6-Nitroquinoline, 98% 613-50-3
2,2-Dichloropentanal, 92% 41718-50-7
1-Ethoxynaphthalene, 97% 5328-01-8
2,5-Difluoronitrobenzene, 99% 364-74-9
1,4-Cyclohexanedimethanol 99%, (Mixture of Cis and Trans) 105-08-8
(S,S)-(-)-1,2-Diphenyl-1,2-Ethanediol, 98+% 2325-10-2
3-Bromotoluene, 99% 591-17-3
3-Carboxypropyl disulfide, 97% 2906-60-7
Orange (II) (Cert) 633-96-5
Glycylglycylglycylglycine, 97% 637-84-3
1,5-Hexadien-3-Ol, 95% 924-41-4
Lactic acid lithium salt, 99% (titr.) 867-55-0
Stearoyl chloride, tech. 112-67-4
Pentyl Ether, 99% (GC) 693-65-2
10-Methyl-9(10H)-acridone, 98% 719-54-0
4-Methyl-1-pentanol, 99% 626-89-1
2,3-Dimethyl-2-Butene, 98% 563-79-1
Ethyl 4-Hydroxybenzoate, 99% 120-47-8
2-Cyclohexen-1-One, 97% 930-68-7
2-Methylhippuric acid, 98% 42013-20-7
4-(Trifluoromethoxy)aniline, 99+% (titr.) 461-82-5
(1S,2S)-(-)-1,2-Diphenyl-1,2-Ethanediamine, 99% (99% e.e.) 35132-20-8
D-(-)-Arabinose, P.A. 28697-53-2
Hoechst 33342 23491-52-3
Sucrose Octaacetate, 98.0-100.5% (on Dry Substance) 126-14-7
1-(2-Pyridyl)piperazine, 98% 34803-66-2
(1R)-(+)-Isomenthol, 99% 23283-97-8
1,2,4,5-Tetrachlorobenzene, 98% 95-94-3
R-(-)1,1'-Binaphthyl-2,2'-Diyl Hydrogen Phosphate, 99% 39648-67-4
(+)-(2-Methylbutyl)benzene, 99% (GC) 40560-30-3
3,4,5-Trimethoxybenzyl alcohol, 97% 3840-31-1
4-Tert.-amylcyclohexanol, 99+%, mixture of cis and trans 5349-51-9
4-(4-Chlorophenylmethyl)-6,7-dimethoxy- isoquinoline methanesulfonate 61189-88-6
Drierite, 4 mesh, without indicator 7778-18-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net