Search   
MSDS 
:
 Drierite, 4 mesh, without indicator
CAS 
:
 7778-18-9
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7778-18-9 |Drierite | 100.0 | 231-900-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Dust may cause mechanical irritation. May cause conjunctivitis.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. Inhalation of dust may cause
respiratory tract irritation. Exposure may result in laryngitis,
pharyngitis, impaired sense of smell and taste, bleeding from nose,
and reactions of trachea, and bronchial membranes.
Chronic:
Inhalation of dust may cause chronic rhinitis (inflammation of the
mucous membrane of the nose).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7778-18-9:
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE
Germany: 6 mg/m3 TWA (respirable fraction)
Malaysia: 10 mg/m3 TWA (particulate matter containing no asbestos
<2% crystalline sili
Spain: 10 mg/m3 VLA-ED (this value is for the particulated matter
that is free from asb

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Granules
Color: colorless
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 1450 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 2.960
Molecular Formula: CaO4S
Molecular Weight: 136.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents - diazomethane vapor - strong acids -
aluminum when heated - mixtures of calcium sulfate and phosphorus
ignites at high temperatures.
Hazardous Decomposition Products:
Oxides of sulfur.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7778-18-9: WS6920000
LD50/LC50:
Not available.
Carcinogenicity:
Drierite -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7778-18-9: 0
Canada
CAS# 7778-18-9 is listed on Canada's DSL List.
CAS# 7778-18-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7778-18-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromoethylamine Hydrobromide, 98+ % 2576-47-8
5-Methyl-S-Triazolo(1,5-a)Pyrimidin-7-Ol 98% 2503-56-2
2-Amino-1-Propene-1,1,3-Tricarbonitrile, 97% 868-54-2
6-Ethoxy-1,2,3,4-Tetrahydro-2,2,4-Tri-Methylquinoline, 97% 16489-90-0
Tetramethylpyrazine, 98% 1124-11-4
Methyl 4-(chloroformyl)-butyrate 98 % 1501-26-4
o-Nitrophenyl-beta-D-thiogalactopyranoside 1158-17-4
Dichloromethylsilane, 97% 75-54-7
Quinidine anhydrous, ca.95%, remainder dihydroquinidine 56-54-2
Coumarin 152, Laser Grade 53518-14-2
o-Nitrophenol (pract), 95% (uv-vis) 88-75-5
5-Nitroso-8-quinolinol 3565-26-2
2,4,6-Tri-Tert-Butylnitrosobenzene, 99% 24973-59-9
Calix(5)arene
Triphenylcarbenium tetrafluoroborate 341-02-6
3-Exo-Aminobicyclo??2.2.1??Heptane-2-Exo-Carboxylic Acid, 98% 88330-32-9
6-Nitroquinoline, 98% 613-50-3
2,2-Dichloropentanal, 92% 41718-50-7
1-Ethoxynaphthalene, 97% 5328-01-8
2,5-Difluoronitrobenzene, 99% 364-74-9
1,4-Cyclohexanedimethanol 99%, (Mixture of Cis and Trans) 105-08-8
(S,S)-(-)-1,2-Diphenyl-1,2-Ethanediol, 98+% 2325-10-2
3-Bromotoluene, 99% 591-17-3
3-Carboxypropyl disulfide, 97% 2906-60-7
Orange (II) (Cert) 633-96-5
Glycylglycylglycylglycine, 97% 637-84-3
1,5-Hexadien-3-Ol, 95% 924-41-4
Lactic acid lithium salt, 99% (titr.) 867-55-0
Stearoyl chloride, tech. 112-67-4
Pentyl Ether, 99% (GC) 693-65-2
10-Methyl-9(10H)-acridone, 98% 719-54-0
4-Methyl-1-pentanol, 99% 626-89-1
2,3-Dimethyl-2-Butene, 98% 563-79-1
Ethyl 4-Hydroxybenzoate, 99% 120-47-8
2-Cyclohexen-1-One, 97% 930-68-7
2-Methylhippuric acid, 98% 42013-20-7
4-(Trifluoromethoxy)aniline, 99+% (titr.) 461-82-5
(1S,2S)-(-)-1,2-Diphenyl-1,2-Ethanediamine, 99% (99% e.e.) 35132-20-8
D-(-)-Arabinose, P.A. 28697-53-2
Hoechst 33342 23491-52-3
Sucrose Octaacetate, 98.0-100.5% (on Dry Substance) 126-14-7
1-(2-Pyridyl)piperazine, 98% 34803-66-2
(1R)-(+)-Isomenthol, 99% 23283-97-8
1,2,4,5-Tetrachlorobenzene, 98% 95-94-3
R-(-)1,1'-Binaphthyl-2,2'-Diyl Hydrogen Phosphate, 99% 39648-67-4
(+)-(2-Methylbutyl)benzene, 99% (GC) 40560-30-3
3,4,5-Trimethoxybenzyl alcohol, 97% 3840-31-1
4-Tert.-amylcyclohexanol, 99+%, mixture of cis and trans 5349-51-9
4-(4-Chlorophenylmethyl)-6,7-dimethoxy- isoquinoline methanesulfonate 61189-88-6
Drierite, 4 mesh, without indicator 7778-18-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net