**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 349-88-2 |4-Fluorobenzenesulfonyl Chloride | 98 | 206-493-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.The toxicological properties of this
material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation and possible burns. The toxicological
properties of this material have not been fully investigated.
Skin:
May cause skin irritation and possible burns. The toxicological
properties of this material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide. Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 349-88-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 95.0 - 96.0 deg C @ 2.00mmHg
Freezing/Melting Point: 33.00 - 35.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H4ClFO2S
Molecular Weight: 194.61
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moist air.
Incompatibilities with Other Materials:
Bases, amines.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 349-88-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Fluorobenzenesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 349-88-2: No information available.
Canada
CAS# 349-88-2 is listed on Canada's NDSL List.
CAS# 349-88-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 349-88-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/12/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
4-Dimethylaminoantipyrine, 97%
| 58-15-1 |
|
(R)-(-)-1-Phenyl-1,2-Ethanediol, 99+%
| 16355-00-3 |
|
Triethylphenylammonium Hydroxide (10% in Water)
| 7620-71-5 |
|
4-Aminophenol Hydrochloride, 98% (UV-Vis)
| 51-78-5 |
|
N-Butylaniline,99%
| 1126-78-9 |
|
4-Chlorobutyryl chloride, 98%
| 4635-59-0 |
|
2-Ethyl-2-Hydroxybutyric Acid, 99%
| 3639-21-2 |
|
Methyl phenyl disulfide, 97+%
| 14173-25-2 |
|
1-Nitropyrene, 99%
| 5522-43-0 |
|
1-Hexadecanesulfonyl chloride, 98%
| 38775-38-1 |
|
M-Phenylene Dibenzoate
| 94-01-9 |
|
5-Methyl-1H-benzotriazole(1,2,3), 98%
| 136-85-6 |
|
1,4-Cyclohexanediol (Pract)
| 556-48-9 |
|
3-Nitrobenzamidine hydrochloride, 97%
| 56406-50-9 |
|
Tris-(3-(Heptafluoropropylhydroxymethylene )-D-Camphorato), Eu (III)
| 34788-82-4 |
|
2,3-Diphenylquinoxaline, 99+% (titr.)
| 1684-14-6 |
|
2-Isopropyl-3-Methoxypyrazine, 97%
| 25773-40-4 |
|
Cadmium fluoride, 99.99+%
| 7790-79-6 |
|
2,2,4-Trichlorobutanal, 97%
| 0-01-1 |
|
2-Fluorenecarboxaldehyde, 99%
| 30084-90-3 |
|
Calcein blue, indicator grade
| 54375-47-2 |
|
Tetraester 4-Tert-Butylcalix(4)Arene, 95% (TLC)
| 0-01-1 |
|
4-Fluorobenzotrifluoride, 97%
| 402-44-8 |
|
1-Oxo-Octyl-Beta-D-Glucoside, 99+%
| 0-01-1 |
|
Arecoline Hydrobromide, 99+%
| 300-08-3 |
|
Dl-2-amino-3-methyl-1-butanol, 95% (gc)
| 16369-05-4 |
|
4-Fluorobenzenesulfonyl Chloride, 98%
| 349-88-2 |
|
Telluroxanthone, 99+%
| 72294-67-8 |
|
Triethanolamine borate, 95+% (ex nitrogen)
| 15277-97-1 |
|
Acetyl-Beta-Methylcholine Bromide, 99%
| 333-31-3 |
|
2,4-Dimethylimidazole, Tech.,90%
| 930-62-1 |
|
Dl-3-methylcyclopentanone, 99%
| 1757-42-2 |
|
Cadmium atomic absorption standard solution, 1 mg/ml Cd in 0.5N HNO3
| 7440-43-9 |
|
3,3'-Diethyloxadicarbocyanine Iodide, 98% (UV-Vis)
| 14806-50-9 |
|
2-(2-(2-Methoxyethoxy)ethoxy)-1,3-Dioxola-ne, 97%
| 74733-99-6 |
|
3,4-Difluorobenzoyl chloride, 98%
| 76903-88-3 |
|
4-Methylsulphonyl Benzaldehyde, 95+%
| 5398-77-6 |
|
N,N'-Bis(3-Aminopropyl)Ethylenediamine, 96.5+% (GC)
| 10563-26-5 |
|
4-Amino-Alpha-Diethylamino-Ortho-Cresol Dihydrochloride, 97%
| 6297-14-9 |
|
Polyvinylpyrrolidone-iodine complex
| 25655-41-8 |
|
2,3,3-Trimethyl-1-butene, 99+%
| 594-56-9 |
|
N-Cyclohexyl-2-pyrrolidone, 99%
| 6837-24-7 |
|
Fluorobenzene-d5, 98+ atom % D
| 1423-10-5 |
|
DL-alpha-Tocopheryl acetate, 98%
| 7695-91-2 |
|
Methyl-d3 alcohol-d, 99.5 atom % D
| 67-56-1 |
|
Didodecylamine (Pract)
| 3007-31-6 |
|
3-Hexylthiophene, 99+%
| 1693-86-3 |
|
N-Methylbenzamide, 99+%
| 613-93-4 |
|
4,4'-Difluorobenzophenone, 99%
| 345-92-6 |
|
1-Fluoronaphthalene, 98%
| 321-38-0 |
|
|