Search   
MSDS 
:
 2,4-Dimethylimidazole, Tech.,90%
CAS 
:
 930-62-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 930-62-1 |2,4-Dimethylimidazole, Tech. | 90 | 213-221-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Keep container
tightly closed. Do not ingest or inhale. Use only in a chemical fume
hood. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 930-62-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Chunks
Color: yellow to orange
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 266 deg C @733 mmHg
Freezing/Melting Point: 85 - 87 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H8N2
Molecular Weight: 96.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 930-62-1: NI4839712
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Dimethylimidazole, Tech. -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3263
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3263
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3263
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 930-62-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 930-62-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 930-62-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/06/1998 Revision #4 Date: 11/09/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Dimethylaminoantipyrine, 97% 58-15-1
(R)-(-)-1-Phenyl-1,2-Ethanediol, 99+% 16355-00-3
Triethylphenylammonium Hydroxide (10% in Water) 7620-71-5
4-Aminophenol Hydrochloride, 98% (UV-Vis) 51-78-5
N-Butylaniline,99% 1126-78-9
4-Chlorobutyryl chloride, 98% 4635-59-0
2-Ethyl-2-Hydroxybutyric Acid, 99% 3639-21-2
Methyl phenyl disulfide, 97+% 14173-25-2
1-Nitropyrene, 99% 5522-43-0
1-Hexadecanesulfonyl chloride, 98% 38775-38-1
M-Phenylene Dibenzoate 94-01-9
5-Methyl-1H-benzotriazole(1,2,3), 98% 136-85-6
1,4-Cyclohexanediol (Pract) 556-48-9
3-Nitrobenzamidine hydrochloride, 97% 56406-50-9
Tris-(3-(Heptafluoropropylhydroxymethylene )-D-Camphorato), Eu (III) 34788-82-4
2,3-Diphenylquinoxaline, 99+% (titr.) 1684-14-6
2-Isopropyl-3-Methoxypyrazine, 97% 25773-40-4
Cadmium fluoride, 99.99+% 7790-79-6
2,2,4-Trichlorobutanal, 97% 0-01-1
2-Fluorenecarboxaldehyde, 99% 30084-90-3
Calcein blue, indicator grade 54375-47-2
Tetraester 4-Tert-Butylcalix(4)Arene, 95% (TLC) 0-01-1
4-Fluorobenzotrifluoride, 97% 402-44-8
1-Oxo-Octyl-Beta-D-Glucoside, 99+% 0-01-1
Arecoline Hydrobromide, 99+% 300-08-3
Dl-2-amino-3-methyl-1-butanol, 95% (gc) 16369-05-4
4-Fluorobenzenesulfonyl Chloride, 98% 349-88-2
Telluroxanthone, 99+% 72294-67-8
Triethanolamine borate, 95+% (ex nitrogen) 15277-97-1
Acetyl-Beta-Methylcholine Bromide, 99% 333-31-3
2,4-Dimethylimidazole, Tech.,90% 930-62-1
Dl-3-methylcyclopentanone, 99% 1757-42-2
Cadmium atomic absorption standard solution, 1 mg/ml Cd in 0.5N HNO3 7440-43-9
3,3'-Diethyloxadicarbocyanine Iodide, 98% (UV-Vis) 14806-50-9
2-(2-(2-Methoxyethoxy)ethoxy)-1,3-Dioxola-ne, 97% 74733-99-6
3,4-Difluorobenzoyl chloride, 98% 76903-88-3
4-Methylsulphonyl Benzaldehyde, 95+% 5398-77-6
N,N'-Bis(3-Aminopropyl)Ethylenediamine, 96.5+% (GC) 10563-26-5
4-Amino-Alpha-Diethylamino-Ortho-Cresol Dihydrochloride, 97% 6297-14-9
Polyvinylpyrrolidone-iodine complex 25655-41-8
2,3,3-Trimethyl-1-butene, 99+% 594-56-9
N-Cyclohexyl-2-pyrrolidone, 99% 6837-24-7
Fluorobenzene-d5, 98+ atom % D 1423-10-5
DL-alpha-Tocopheryl acetate, 98% 7695-91-2
Methyl-d3 alcohol-d, 99.5 atom % D 67-56-1
Didodecylamine (Pract) 3007-31-6
3-Hexylthiophene, 99+% 1693-86-3
N-Methylbenzamide, 99+% 613-93-4
4,4'-Difluorobenzophenone, 99% 345-92-6
1-Fluoronaphthalene, 98% 321-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net