Search   
MSDS 
:
 4-Chlorobutyryl chloride, 98%
CAS 
:
 4635-59-0
SYNONYMS 
:
 Butanoyl chloride, 4-chloro-; Butyryl chloride, 4-chloro-;     4-Chlorobutanoic acid chloride; 4-Chlorobutanoyl chloride;     4-Chlorobutyric acid chloride; a-Chlorobutyroyl chloride;     4-Chlorobutyroyl chloride; gamma-Chlorobutyryl chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4635-59-0 |4-Chlorobutyryl chloride | 98 | 225-059-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Stench.Moisture
sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Inhalation may be fatal as
a result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema. May be harmful if inhaled.
Chronic:
Effects may be delayed. Symptoms of exposure may include burning
sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea and vomiting. Chronic inhalation may cause spasm,
inflammation and edema of the larynx and bronchi, chemical
pneumonitis, and pulmonary edema.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting and seek IMMEDIATE MEDICAL ADVICE. Wash mouth out with
water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Do NOT use water directly on fire. Use water spray to cool
fire-exposed containers. Use foam, dry chemical, or carbon dioxide.
Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Empty containers
retain product residue, (liquid and/or vapor), and can be dangerous.
Keep container tightly closed. Keep away from heat, sparks and flame.
Do not allow contact with water. Use only in a chemical fume hood.
Discard contaminated shoes. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Do not store in direct sunlight. Keep container closed
when not in use. Store in a tightly closed container. Store in a
cool, dry, well-ventilated area away from incompatible substances.
Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use only under a chemical fume hood.
Exposure Limits
CAS# 4635-59-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: light-gold
Odor: Stench
pH: Not available.
Vapor Pressure: 3 mm Hg @20 deg C
Viscosity: Not available.
Boiling Point: 173 - 174 deg C @ 760.00mm Hg
Freezing/Melting Point: -47 deg C
Autoignition Temperature: 440 deg C ( 824.00 deg F)
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: 5.50 vol %
Explosion Limits, upper: 11.70 vol %
Decomposition Temperature: >120 deg C
Solubility in water: hydrolyzes
Specific Gravity/Density: 1.2580g/cm3
Molecular Formula: C4H6Cl2O
Molecular Weight: 141.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, alcohols, moisture.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic
fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4635-59-0: EM1406000
LD50/LC50:
CAS# 4635-59-0: Inhalation, rat: LC50 = 650 mg/m3/4H.
Inhalation, rat: LC50 = 650
Carcinogenicity:
4-Chlorobutyryl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2927
Packing Group: I
IMO
Shipping Name: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2927
Packing Group: I
RID/ADR
Shipping Name: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 2927
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4635-59-0: No information available.
Canada
CAS# 4635-59-0 is listed on Canada's DSL List.
CAS# 4635-59-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4635-59-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Dimethylaminoantipyrine, 97% 58-15-1
(R)-(-)-1-Phenyl-1,2-Ethanediol, 99+% 16355-00-3
Triethylphenylammonium Hydroxide (10% in Water) 7620-71-5
4-Aminophenol Hydrochloride, 98% (UV-Vis) 51-78-5
N-Butylaniline,99% 1126-78-9
4-Chlorobutyryl chloride, 98% 4635-59-0
2-Ethyl-2-Hydroxybutyric Acid, 99% 3639-21-2
Methyl phenyl disulfide, 97+% 14173-25-2
1-Nitropyrene, 99% 5522-43-0
1-Hexadecanesulfonyl chloride, 98% 38775-38-1
M-Phenylene Dibenzoate 94-01-9
5-Methyl-1H-benzotriazole(1,2,3), 98% 136-85-6
1,4-Cyclohexanediol (Pract) 556-48-9
3-Nitrobenzamidine hydrochloride, 97% 56406-50-9
Tris-(3-(Heptafluoropropylhydroxymethylene )-D-Camphorato), Eu (III) 34788-82-4
2,3-Diphenylquinoxaline, 99+% (titr.) 1684-14-6
2-Isopropyl-3-Methoxypyrazine, 97% 25773-40-4
Cadmium fluoride, 99.99+% 7790-79-6
2,2,4-Trichlorobutanal, 97% 0-01-1
2-Fluorenecarboxaldehyde, 99% 30084-90-3
Calcein blue, indicator grade 54375-47-2
Tetraester 4-Tert-Butylcalix(4)Arene, 95% (TLC) 0-01-1
4-Fluorobenzotrifluoride, 97% 402-44-8
1-Oxo-Octyl-Beta-D-Glucoside, 99+% 0-01-1
Arecoline Hydrobromide, 99+% 300-08-3
Dl-2-amino-3-methyl-1-butanol, 95% (gc) 16369-05-4
4-Fluorobenzenesulfonyl Chloride, 98% 349-88-2
Telluroxanthone, 99+% 72294-67-8
Triethanolamine borate, 95+% (ex nitrogen) 15277-97-1
Acetyl-Beta-Methylcholine Bromide, 99% 333-31-3
2,4-Dimethylimidazole, Tech.,90% 930-62-1
Dl-3-methylcyclopentanone, 99% 1757-42-2
Cadmium atomic absorption standard solution, 1 mg/ml Cd in 0.5N HNO3 7440-43-9
3,3'-Diethyloxadicarbocyanine Iodide, 98% (UV-Vis) 14806-50-9
2-(2-(2-Methoxyethoxy)ethoxy)-1,3-Dioxola-ne, 97% 74733-99-6
3,4-Difluorobenzoyl chloride, 98% 76903-88-3
4-Methylsulphonyl Benzaldehyde, 95+% 5398-77-6
N,N'-Bis(3-Aminopropyl)Ethylenediamine, 96.5+% (GC) 10563-26-5
4-Amino-Alpha-Diethylamino-Ortho-Cresol Dihydrochloride, 97% 6297-14-9
Polyvinylpyrrolidone-iodine complex 25655-41-8
2,3,3-Trimethyl-1-butene, 99+% 594-56-9
N-Cyclohexyl-2-pyrrolidone, 99% 6837-24-7
Fluorobenzene-d5, 98+ atom % D 1423-10-5
DL-alpha-Tocopheryl acetate, 98% 7695-91-2
Methyl-d3 alcohol-d, 99.5 atom % D 67-56-1
Didodecylamine (Pract) 3007-31-6
3-Hexylthiophene, 99+% 1693-86-3
N-Methylbenzamide, 99+% 613-93-4
4,4'-Difluorobenzophenone, 99% 345-92-6
1-Fluoronaphthalene, 98% 321-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net