Search   
MSDS 
:
 Streptomycin sulfate
CAS 
:
 3810-74-0
SYNONYMS 
:
 Streptomycin A Sulfate; Streptomycin Sesquisulfate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3810-74-0 |Streptomycin sulfate | 100.0 | 223-286-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Exposure to solid may cause pain and redness.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. May be absorbed through
the skin.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause kidney damage.
Inhalation:
May cause effects similar to those described for ingestion.
Chronic:
May cause reproductive and fetal effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3810-74-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: mild odor - amine-like
pH: 4.5-7.0 (20% sol)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C42H78N14O24H6O12S3
Molecular Weight: 1456.8402

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3810-74-0: WK4990000
LD50/LC50:
CAS# 3810-74-0: Oral, mouse: LD50 = 430 mg/kg; Oral, rat: LD50 = 430
mg/kg.
Carcinogenicity:
Streptomycin sulfate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3810-74-0: No information available.
Canada
CAS# 3810-74-0 is listed on Canada's DSL List.
CAS# 3810-74-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3810-74-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/15/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-1-4'-Tosylamino-2-Phenylethyl Chloromethyl Ketone, 99+% 402-71-1
4-Methylumbelliferone phosphate, 99.5% (hplc) 3368-04-5
6-Chloro-meta-anisidine hydrochloride, 98% 2401-24-3
5-Indanol, 99% 1470-94-6
1,1-Dichloroethane,99+%, Stabilized with Nitromethane 75-34-3
2,3-Dihydro-2-Oxo-1H-Imidazol-4-Carbox-Aldehyde, 99% 0-00-1
2,5-Dihydroxy-1,4-Benzenedisulfonic Acid, Dipotassium Salt, 98% 15763-57-2
Phenacyltriphenylphosphonium bromide 96% 6048-29-9
cis-Pinonic acid, 98% 473-72-3
Camphene, 75%, Remainder Mainly Alpha-Fenchene 79-92-5
Scopolamine Hydrobromide Trihydrate, 99.0-101.0% (On The Anhydrous 6533-68-2
n-Methoxymethylaza-18-crown-6, 96%
Benzyl Propionate, 98+% 122-63-4
1-Methyl-1-Phenylhydrazine, 98% (titr.) 618-40-6
O-(4-Nitrobenzyl)hydroxylamine hydrochloride, 98% 2086-26-2
alpha-Benzoin oxime, 98% 441-38-3
Oxalyl monoguanylhydrazide, 97% (titr.) 89797-67-1
3-Chlorobenzoic Acid, 98% (Titr.) 535-80-8
(R)-(+)-alpha-(1-Naphthyl)ethylamine 99+% 3886-70-2
Cyanocobalamin 68-19-9
Isopropan(ol-d), 98+ atom % d 3979-51-9
2-Bromostyrene, 98%, Stabilized With 0.005% 4-Tert.-Butylcatechol 2039-88-5
Methylamine-d5 deuteriochloride, 98+ atom % D 593-51-1
3,5-Dimethylphenol, 99+% 108-68-9
2-Chloro-5-nitrobenzonitrile, 99% 16588-02-6
6-Bromoveratraldehyde, 97% 5392-10-9
3,5-Dichlorobenzonitrile, 97% 6575-00-4
Methyl (R)-(-)-3-Hydroxybutyrate, 99% 3976-69-0
4-CHLOROSTYRENE, 98% (GC) 1073-67-2
Ethyl 2-hydroxyethyl sulfide, 98% 110-77-0
2-Bromobutane, 99+% (GC) 78-76-2
4-Bromo-2,2-Diphenylbutyronitrile, 95+% 39186-58-8
Acridine-4, 9-Dicarboxylic Acid Monohydrate 27574-29-4
N-Aminomorpholine, 97%(GC) 4319-49-7
Cyclohexyl Diphenyl Phosphine 6372-42-5
2,4-Diamino-6-Mercaptopyrimidine Hemisulfate, Tech. 81012-96-6
Diethyl Succinate, 99% 123-25-1
1,3-Difluoro-4-iodobenzene, 99+% 2265-93-2
Mono-methyl 5-nitroisophthalate, 98% 1955-46-0
Citric acid monohydrate 77-92-9
3-Pyrrolidino-1,2-Propanediol, 96% 85391-19-1
Delta-Valerolactam, 99% 675-20-7
Cycloheptyl Bromide, 97% 2404-35-5
Penicillin G Potassium Salt 113-98-4
Nicotinic acid hydrazide, 97% 553-53-7
Ethyl (2r,3r)-2,3-epoxy-3-methylpropanoate 96% 19780-35-9
Beta-Sitosterol, ca 75% Beta-Sitosterol, With ca 10% Campesterol
3-Hydroxy-4(2-Hydroxy-4-Sulfo-1-Naphtyl Azo)naphthalene-2-Carboxylic 3737-95-9
Streptomycin sulfate 3810-74-0
Cyanogen Bromide 506-68-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net