Search   
MSDS 
:
 2-Bromobutane, 99+% (GC)
CAS 
:
 78-76-2
SYNONYMS 
:
 Sec-Butyl Bromide; Methylethylbromomethane.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 78-76-2 |2-Bromobutane | 99 | 201-140-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. Vapors may cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause central nervous system depression.
Inhalation:
Causes respiratory tract irritation. Exposure produces central
nervous system depression. Inhalation of vapor may cause severe
respiratory tract irritation. Causes narcotic effects including
headache, dizziness, weakness, unconsciousness, and possible death.
Vapors may cause dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Will burn if involved in a fire.
Use water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal. Remove all sources of ignition. Use a spark-proof tool.
Provide ventilation. A vapor suppressing foam may be used to reduce
vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use only in a
well-ventilated area. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with skin and eyes. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 78-76-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: 57 mm Hg @ 25C
Viscosity: Not available.
Boiling Point: 91 deg C
Freezing/Melting Point: -112 deg C
Autoignition Temperature: 265 deg C ( 509.00 deg F)
Flash Point: 21 deg C ( 69.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 1.257
Molecular Formula: C4H9Br
Molecular Weight: 136.967

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, mechanical shock, incompatible materials, ignition
sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 78-76-2: EJ6228000
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromobutane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
S 33 Take precautionary measures against static
discharges.
S 50A Do not mix with acids.
WGK (Water Danger/Protection)
CAS# 78-76-2: No information available.
Canada
CAS# 78-76-2 is listed on Canada's DSL List.
CAS# 78-76-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 78-76-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/08/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-1-4'-Tosylamino-2-Phenylethyl Chloromethyl Ketone, 99+% 402-71-1
4-Methylumbelliferone phosphate, 99.5% (hplc) 3368-04-5
6-Chloro-meta-anisidine hydrochloride, 98% 2401-24-3
5-Indanol, 99% 1470-94-6
1,1-Dichloroethane,99+%, Stabilized with Nitromethane 75-34-3
2,3-Dihydro-2-Oxo-1H-Imidazol-4-Carbox-Aldehyde, 99% 0-00-1
2,5-Dihydroxy-1,4-Benzenedisulfonic Acid, Dipotassium Salt, 98% 15763-57-2
Phenacyltriphenylphosphonium bromide 96% 6048-29-9
cis-Pinonic acid, 98% 473-72-3
Camphene, 75%, Remainder Mainly Alpha-Fenchene 79-92-5
Scopolamine Hydrobromide Trihydrate, 99.0-101.0% (On The Anhydrous 6533-68-2
n-Methoxymethylaza-18-crown-6, 96%
Benzyl Propionate, 98+% 122-63-4
1-Methyl-1-Phenylhydrazine, 98% (titr.) 618-40-6
O-(4-Nitrobenzyl)hydroxylamine hydrochloride, 98% 2086-26-2
alpha-Benzoin oxime, 98% 441-38-3
Oxalyl monoguanylhydrazide, 97% (titr.) 89797-67-1
3-Chlorobenzoic Acid, 98% (Titr.) 535-80-8
(R)-(+)-alpha-(1-Naphthyl)ethylamine 99+% 3886-70-2
Cyanocobalamin 68-19-9
Isopropan(ol-d), 98+ atom % d 3979-51-9
2-Bromostyrene, 98%, Stabilized With 0.005% 4-Tert.-Butylcatechol 2039-88-5
Methylamine-d5 deuteriochloride, 98+ atom % D 593-51-1
3,5-Dimethylphenol, 99+% 108-68-9
2-Chloro-5-nitrobenzonitrile, 99% 16588-02-6
6-Bromoveratraldehyde, 97% 5392-10-9
3,5-Dichlorobenzonitrile, 97% 6575-00-4
Methyl (R)-(-)-3-Hydroxybutyrate, 99% 3976-69-0
4-CHLOROSTYRENE, 98% (GC) 1073-67-2
Ethyl 2-hydroxyethyl sulfide, 98% 110-77-0
2-Bromobutane, 99+% (GC) 78-76-2
4-Bromo-2,2-Diphenylbutyronitrile, 95+% 39186-58-8
Acridine-4, 9-Dicarboxylic Acid Monohydrate 27574-29-4
N-Aminomorpholine, 97%(GC) 4319-49-7
Cyclohexyl Diphenyl Phosphine 6372-42-5
2,4-Diamino-6-Mercaptopyrimidine Hemisulfate, Tech. 81012-96-6
Diethyl Succinate, 99% 123-25-1
1,3-Difluoro-4-iodobenzene, 99+% 2265-93-2
Mono-methyl 5-nitroisophthalate, 98% 1955-46-0
Citric acid monohydrate 77-92-9
3-Pyrrolidino-1,2-Propanediol, 96% 85391-19-1
Delta-Valerolactam, 99% 675-20-7
Cycloheptyl Bromide, 97% 2404-35-5
Penicillin G Potassium Salt 113-98-4
Nicotinic acid hydrazide, 97% 553-53-7
Ethyl (2r,3r)-2,3-epoxy-3-methylpropanoate 96% 19780-35-9
Beta-Sitosterol, ca 75% Beta-Sitosterol, With ca 10% Campesterol
3-Hydroxy-4(2-Hydroxy-4-Sulfo-1-Naphtyl Azo)naphthalene-2-Carboxylic 3737-95-9
Streptomycin sulfate 3810-74-0
Cyanogen Bromide 506-68-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net