Search   
MSDS 
:
 2-Dimethylaminoisopropyl chloride  hydrochloride, 98.5% (titr.)
CAS 
:
 4584-49-0
SYNONYMS 
:
 2-Chloro-N,N-dimethylpropylamine hydrochloride; DMIC
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4584-49-0 |2-Dimethylaminoisopropyl chloride hydr| 98.5 | 224-971-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation. Wash
clothing before reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4584-49-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white to light cream
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 194.00 - 195.00 deg C
Autoignition Temperature: Not available.
Flash Point: 220 deg C ( 428.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 220 deg C
Solubility in water: 2000 G/L WATER (20 C)
Specific Gravity/Density:
Molecular Formula: C5H12ClN.HCl
Molecular Weight: 158.07

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4584-49-0: TY1225000
LD50/LC50:
Not available.
Carcinogenicity:
2-Dimethylaminoisopropyl chloride hydrochloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4584-49-0: 1
Canada
CAS# 4584-49-0 is listed on Canada's NDSL List.
CAS# 4584-49-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4584-49-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/07/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl chloroacetate 105-39-5
1,2:3,4-Di-O-isopropylidene-D-galactopyranose, 97% 4064-06-6
4-Nitrophenylhydrazine, 98% 100-16-3
1,1,4,4-Tetraphenyl-1,3-Butadiene, 99% 1450-63-1
2-Mercaptopyridine-n-oxide, sodium salt, monohydrate,98% 3811-73-2
1,3-Propane sultone, 97% 1120-71-4
Poly(ethylene glycol methyl ether), average M.W. 350 9004-74-4
Poly(ethylene glycol methyl ether), average mw. 750 9004-74-4
Azetidine, 99+% 503-29-7
Methyl Violet 2B High Purity Biological Stain 8004-87-3
Methyl Violet 2B (Cert) 8004-87-3
4,7-Diphenyl-1,10-Phenanthroline, 99% 1662-01-7
1',3',3'-Trimethyl-6-hydroxyspiro (2h-1-benzopyran-2,2'-indoline) 23001-29-8
Diethyl Carbonate, 99% 105-58-8
1,2,4-1h-triazole, 99+%, flakes 288-88-0
Hydroquinone Bis(2-Hydroxyethyl)ether, 99+% 104-38-1
Silicon, Pieces, 99.9999% 7440-21-3
Silicon, Powder, -60 Mesh, 99.999% 7440-21-3
Phenanthrenequinone, tech. 80% 84-11-7
3-Aminofluoranthene 2693-46-1
Phenanthrenequinone, 98% (uv-vis) 84-11-7
4-(4-Chlorophenyl)-4-hydroxypiperidine, 99%(titr.) 39512-49-7
4-Methyl-3-nitrobenzyl alcohol, 99% 40870-59-5
Amberlite ira-410 ion-exchange resin 9002-26-0
Isoprene, 99+%, stabilized with 100 ppm 4-tert-butylcatechol 78-79-5
Poly(isoprene), cis, average M.W. 800,000 9003-31-0
Isopropenyl Acetate, 99% 108-22-5
N,N,N',N'-Tetramethyl-p-phenylenediamine dihydrochloride, 96% 637-01-4
Ethyl-Vinyl Ether, 99%, stabilized with 0.1% Potassium Hydroxide 109-92-2
1,1,1-Trichloro-2-methyl-2-propanol hemihydrate 57-15-8
n-Butyric Anhydride, 98% 106-31-0
2,2',4'-Trichloroacetophenone,tech. 4252-78-2
Benz(a)anthracene-7,12-dione, 99% 2498-66-0
(+)-Limonene, 97%, stabilized with 0.03% Tocopherol 5989-27-5
(+)-Limonene, tech., 95%, stabilized with 0.03% Tocopherol 5989-27-5
2,4-Dichlorophenoxyacetic acid, 99+% 94-75-7
??-nicotinamide adenine dinucleotide, disodium salt,reduced form, 98% 606-68-8
4-Bromobenzaldehyde, 99% 1122-91-4
Benzyl cyanide, 99+% 140-29-4
5-Bromosalicylaldehyde, 99% 1761-61-1
Silica Gel, 60-200 Mesh 7631-86-9
Poly(acrylic acid), sec. stand., aver. M.W. 1,080,000, aver. M.N. 9003-01-4
Poly(acrylic acid), 50 wt. % solution in water 7732-18-5
(R)-(+)-1-Benzylglycerol, 97% 56552-80-8
Poly(acrylic acid), 25 wt% solution in water 7732-18-5
Poly(acrylic acid), 52-56% aqueous solution 7732-18-5
Potassium nitrosodisulfonate, 50-75%, remainder water and methanol 14293-70-0
Zinc, Powder, -200 Mesh, 99.9999% 7440-66-6
2-Dimethylaminoisopropyl chloride hydrochloride, 98.5% (titr.) 4584-49-0
Zinc, Mossy, 99+% 7440-66-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net