Search   
MSDS 
:
 Heptyl Isocyanate, 97%
CAS 
:
 4747-81-3
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4747-81-3 |Heptyl Isocyanate | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38 41

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin. Risk of serious
damage to eyes.Moisture sensitive.The toxicological properties of
this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears). May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin irritation. Organic isocyanates can cause local
irritation and allergic reactions. May cause irritation and
dermatitis. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Aspiration may lead
to pulmonary edema. At high concentrations, isocyanates affect
mucous membranes of the respiratory tract and may lead to fatal
pulmonary edema. Exposure to low and often even unmeasurable
isocyanate concentration results in sensitization. Can produce
delayed pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
Effects may be delayed. Chronic overexposure to isocyanates has been
reported to cause lung damage, including decreased lung fuction,
which may be permanent.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out
with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Combustible
liquid. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Water may be ineffective. Use agent most
appropriate to extinguish fire. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Do not allow contact with water. Wash
clothing before reuse. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4747-81-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 75 deg C @ 15.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8760g/cm3
Molecular Formula: CH3(CH2)5CH2NCO
Molecular Weight: 141.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4747-81-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Heptyl Isocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOCYANATES, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2206
Packing Group: III
IMO
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing Group: III
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4747-81-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4747-81-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4747-81-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/14/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Amino-1-Naphthol Hydrochloride, Tech. 90% 5959-56-8
2,6-Diisopropylphenyl Isocyanate, 98% 28178-42-9
3-Bromophenyl isocyanate, 97% 23138-55-8
3,5-Dichlorophenyl Isocyanate, 96% 34893-92-0
4-Fluoro-3-Nitrophenyl Isocyanate, 98% 65303-82-4
3,5-Dimethylphenyl isocyanate, 99% 54132-75-1
3,5-Bis(trifluoromethyl)phenyl isocyanate, 98% 16588-74-2
3-Cyanophenyl Isocyanate, 97% 16413-26-6
4-(Methylthio)phenyl Isocyanate, 97% 1632-84-4
n-Propyl nitrate, 97% 627-13-4
Gallic Acid Ethyl Ester, 99% 831-61-8
2-Ethylphenyl Isocyanate, 99% 40411-25-4
2,6-Dimethylphenyl isocyanate, 99% 28556-81-2
Alpha, Alpha, Alpha-Trifluoro-p-Tolyl Isocyanate, 99% 1548-13-6
1-Cyanothioformanilide, 97% 4955-82-2
1-Cyano-N-methylthioformamide, 95% 13621-47-1
Tert-Octyl Isothiocyanate, 94% 17701-76-7
2,3-Dichlorophenyl isocyanate, 97% 41195-90-8
2-Chloro-6-Methylphenyl Isocyanate, 97% 40398-01-4
4-Methyl-3-Nitrophenyl Isocyanate, 98% 13471-69-7
Benzoyl isocyanate, tech., 90% 4461-33-0
2,4-Dimethoxyphenyl Isocyanate, 97% 84370-87-6
Chloroacetyl isocyanate 4461-30-7
Ethoxycarbonyl Isocyanate, Tech., 90% 19617-43-7
Pentyl Isocyanate, 98% 3954-13-0
Hexadecyl isocyanate, 97% 1943-84-6
Heptyl Isocyanate, 97% 4747-81-3
4-(Chloromethyl)Phenyl Isocyanate, 97% 29173-65-7
1-Adamantyl isocyanate, 98% 4411-25-0
1-Chloromethyl-2,4-Diisocyanatobenzene, 98% 51979-57-8
1,4-Diisocyanatobutane, 97% 4538-37-8
trans-1,4-Cyclohexane diisocyanate, 97% 7517-76-2
1,8-Diisocyanatooctane, 98% 10124-86-4
1,12-Diisocyanatododecane, 97% 13879-35-1
4-Isocyanaobenzoyl Chloride, 98% 3729-21-3
3-(Chloromethyl)Benzoyl Chloride, 98% 63024-77-1
4-(Chloromethyl)Benzoyl Chloride, 97% 876-08-4
3-(Dichloromethyl)benzoyl Chloride, 96% 36747-51-0
1-Chloroethyl Chloroformate, 99% 50893-53-3
1-Chloro-2-Methylpropyl Chloroformate, 98% 92600-11-8
(+/-)-1,2,2,2-Tetrachloroethyl chloroformate, 98% 98015-53-3
4-Chlorobutyl chloroformate, 97% 37693-18-8
Triethylene glycol bis(chloroformate), 97% 17134-17-7
(+)-Menthyl chloroformate 7635-54-3
Diisopropylcarbamoyl Chloride, 98% 19009-39-3
Ethylphosphonic dichloride, 98% 1066-50-8
Butylphosphonic Dichloride, 98% 2302-80-9
Octyl chloroformate, 97% 7452-59-7
P-Tolyl Chloroformate, 97% 937-62-2
4-Methoxyphenyl Chloroformate, 98% 7693-41-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net