Search   
MSDS 
:
 4-(Chloromethyl)Benzoyl Chloride, 97%
CAS 
:
 876-08-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 876-08-4 |4-(Chloromethyl)Benzoyl Chloride | 97% | 212-881-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.Lachrymator (substance
which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause systemic effects. Inhalation at
high concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Use agent most appropriate to extinguish
fire. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Do not allow
contact with water. Discard contaminated shoes. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers
to heat, sparks or open flames. Keep from contact with moist air and
steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a cool,
dry, well-ventilated area away from incompatible substances.
Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 876-08-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 126 - 128 deg C @ 6mmHg
Freezing/Melting Point: 30 - 32 deg C
Autoignition Temperature: Not available.
Flash Point: 92 deg C ( 197.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: ClCH2C6H4COCl
Molecular Weight: 189.04

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 876-08-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(Chloromethyl)Benzoyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 876-08-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 876-08-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 876-08-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/08/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Amino-1-Naphthol Hydrochloride, Tech. 90% 5959-56-8
2,6-Diisopropylphenyl Isocyanate, 98% 28178-42-9
3-Bromophenyl isocyanate, 97% 23138-55-8
3,5-Dichlorophenyl Isocyanate, 96% 34893-92-0
4-Fluoro-3-Nitrophenyl Isocyanate, 98% 65303-82-4
3,5-Dimethylphenyl isocyanate, 99% 54132-75-1
3,5-Bis(trifluoromethyl)phenyl isocyanate, 98% 16588-74-2
3-Cyanophenyl Isocyanate, 97% 16413-26-6
4-(Methylthio)phenyl Isocyanate, 97% 1632-84-4
n-Propyl nitrate, 97% 627-13-4
Gallic Acid Ethyl Ester, 99% 831-61-8
2-Ethylphenyl Isocyanate, 99% 40411-25-4
2,6-Dimethylphenyl isocyanate, 99% 28556-81-2
Alpha, Alpha, Alpha-Trifluoro-p-Tolyl Isocyanate, 99% 1548-13-6
1-Cyanothioformanilide, 97% 4955-82-2
1-Cyano-N-methylthioformamide, 95% 13621-47-1
Tert-Octyl Isothiocyanate, 94% 17701-76-7
2,3-Dichlorophenyl isocyanate, 97% 41195-90-8
2-Chloro-6-Methylphenyl Isocyanate, 97% 40398-01-4
4-Methyl-3-Nitrophenyl Isocyanate, 98% 13471-69-7
Benzoyl isocyanate, tech., 90% 4461-33-0
2,4-Dimethoxyphenyl Isocyanate, 97% 84370-87-6
Chloroacetyl isocyanate 4461-30-7
Ethoxycarbonyl Isocyanate, Tech., 90% 19617-43-7
Pentyl Isocyanate, 98% 3954-13-0
Hexadecyl isocyanate, 97% 1943-84-6
Heptyl Isocyanate, 97% 4747-81-3
4-(Chloromethyl)Phenyl Isocyanate, 97% 29173-65-7
1-Adamantyl isocyanate, 98% 4411-25-0
1-Chloromethyl-2,4-Diisocyanatobenzene, 98% 51979-57-8
1,4-Diisocyanatobutane, 97% 4538-37-8
trans-1,4-Cyclohexane diisocyanate, 97% 7517-76-2
1,8-Diisocyanatooctane, 98% 10124-86-4
1,12-Diisocyanatododecane, 97% 13879-35-1
4-Isocyanaobenzoyl Chloride, 98% 3729-21-3
3-(Chloromethyl)Benzoyl Chloride, 98% 63024-77-1
4-(Chloromethyl)Benzoyl Chloride, 97% 876-08-4
3-(Dichloromethyl)benzoyl Chloride, 96% 36747-51-0
1-Chloroethyl Chloroformate, 99% 50893-53-3
1-Chloro-2-Methylpropyl Chloroformate, 98% 92600-11-8
(+/-)-1,2,2,2-Tetrachloroethyl chloroformate, 98% 98015-53-3
4-Chlorobutyl chloroformate, 97% 37693-18-8
Triethylene glycol bis(chloroformate), 97% 17134-17-7
(+)-Menthyl chloroformate 7635-54-3
Diisopropylcarbamoyl Chloride, 98% 19009-39-3
Ethylphosphonic dichloride, 98% 1066-50-8
Butylphosphonic Dichloride, 98% 2302-80-9
Octyl chloroformate, 97% 7452-59-7
P-Tolyl Chloroformate, 97% 937-62-2
4-Methoxyphenyl Chloroformate, 98% 7693-41-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net