Search   
MSDS 
:
 2-Methyl-6-isopropylaniline, 97%
CAS 
:
 5266-85-3
SYNONYMS 
:
 2-Methyl-6-(1-methylethyl)benzenamine; 6-Isopropyl-o-toluidine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5266-85-3 |2-Methyl-6-isopropylaniline | 97 | 226-083-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 10 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation, in contact with skin and if
swallowed.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression. May
form methemoglobin which in sufficient concentration causes cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood).
Inhalation:
May cause cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood). Aspiration may lead to pulmonary edema.
Vapors may cause dizziness or suffocation. May cause burning
sensation in the chest.
Chronic:
Absorption into the body leads to the formation of methemoglobin
which in sufficient concentrations causes cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. This material is
lighter than water and insoluble in water. The fire could easily be
spread by the use of water in an area where the water cannot be
contained. Do NOT use straight streams of water. In case of fire,
use carbon dioxide, dry chemical powder or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust. Use a
spark-proof tool. A vapor suppressing foam may be used to reduce
vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep containers tightly
closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 5266-85-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear safety glasses and
chemical goggles if splashing is possible.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: dark red to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 238 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 41 deg C ( 105.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: 0.3 g/l (20C )
Specific Gravity/Density: .9480g/cm3
Molecular Formula: C10H15N
Molecular Weight: 149.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5266-85-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methyl-6-isopropylaniline -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 10 Flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 5266-85-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5266-85-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5266-85-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
o-Tolyl isocyanate, 99+% 614-68-6
Perfluorodecyl iodide, 97% 423-62-1
3-Phenoxy-1,2-Propanediol, 95% 538-43-2
Ethylenediaminetetraacetic Acid, Trisodium Salt Hydrate, 98% 150-38-9
Ethyl 2-thiopheneacetate, 98% 57382-97-5
4,4'-(Hexafluoroisopropylidene)diphenol, 97% 1478-61-1
2,2,3,3,3-Pentafluoro-1-propanol, 97% 422-05-9
Difluoroacetic Acid, 98% 381-73-7
Fluoroacetonitrile, 99% 503-20-8
3,3,3-Triphenylpropionic Acid, 97% 900-91-4
1-Phenylsemicarbazide 103-03-7
1-Pentyne, 99% 627-19-0
2-Chloropropene, 98% 557-98-2
2,6-Dichlorophenylhydrazine Hydrochloride 50709-36-9
1,2,4,5-Benzenetetracarbonitrile, 99% 712-74-3
4-Nitroguaiacol, 97% 3251-56-7
4,4'-Dinitrobibenzyl, tech., 80% 736-30-1
Ethyl ethoxyacetate, 98% 817-95-8
2,4-Dichloro-5-Sulfamoylbenzoic Acid, 98% 2736-23-4
m-Toluamide, 99% 618-47-3
Methyl 3,5-dinitrobenzoate, 99% 2702-58-1
5-Hydroxyanthranilic acid, 99% 394-31-0
4-Bromo-1,2-(Methylenedioxy)benzene, 97% 2635-13-4
Cis-1,2-Cyclopentanediol, 98% 5057-98-7
Tetramethyl-1,3-Cyclobutanedione, 99% 933-52-8
3-(Isothiocyanatomethyl)-PROXYL, free radical 78140-52-0
4-Undecyloxybenzoic acid, 98% 15872-43-2
Benzyl phenyl ether, 98% 945-51-7
9-Phenyl-9-fluorenol, 99% 25603-67-2
Ethyl cyanoglyoxylate-2-oxime, 97% 3849-21-6
Methyl dichlorophosphate, 97% 677-24-7
Cis-1,2-Cyclohexanediol, 99% 1792-81-0
2-Norbornanecarbonitrile, 98%, Mixture of Endo and Exo 2234-26-6
Hexanes, c.p. 110-54-3
2',4'-Dimethylacetophenone, 96% 89-74-7
3,4-Dimethoxy-3-Cyclobutene-1,2-Dione, 99% 5222-73-1
5-Fluoro-2-methylbenzoic acid, 99% 33184-16-6
6-Fluoro-4-Chromanone, 99% 66892-34-0
beta-D-Lactose, ca 80% beta and 20% alpha 5965-66-2
Phenylmaleic Anhydride, 99% 36122-35-7
Dichloromethylphosphine, tech., 90% 676-83-5
4-Bromo-2,6-Di-Tert-Butylphenol, 98% 1139-52-2
2-Chloro-4-fluorobenzonitrile, 99% 60702-69-4
4,5-Dimethoxy-2-Nitrocinnamic Acid, 97% 20567-38-8
4-Hydroxy-2(5h)-furanone, 98% 541-57-1
Diethyl meso-2,5-dibromoadipate 869-10-3
2-Methyl-6-isopropylaniline, 97% 5266-85-3
1,8-Diphenyl-1,3,5,7-octatetraene 3029-40-1
3-Cyanoindole, 98% 5457-28-3
Methyl 4-(bromomethyl)benzoate, 98% 2417-72-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net