**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5402-73-3 |Benzenesulfonyl Chloride, 2,5-Dichloro| 98 | 226-453-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Do not breathe dust, vapor, mist, or gas. Keep
container tightly closed. Avoid ingestion and inhalation. Do not
allow contact with water. Discard contaminated shoes. Keep from
contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5402-73-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: very slightly beige
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 36.00 - 37.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H3Cl3O2S
Molecular Weight: 245.51
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 5402-73-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzenesulfonyl Chloride, 2,5-Dichloro- -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5402-73-3: No information available.
Canada
CAS# 5402-73-3 is listed on Canada's NDSL List.
CAS# 5402-73-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5402-73-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
tert-Butanol
| 75-65-0 |
|
2-Chloro-2-methylpropane
| 507-20-0 |
|
1,2-Dihydro-1-Methyl-2-Phenacylidene- Naphtho(1,2-d)Thiazole, 97%
| 1042-84-8 |
|
Saccharin, 98+%
| 81-07-2 |
|
2,5-Dichlorobenzenesulfonyl Chloride, 98%
| 5402-73-3 |
|
Sodium Sulfide Nonahydrate, Reagent ACS (Crystals)
| 1313-84-4 |
|
3-Nitrophthalic Acid, 95%(TLC)
| 603-11-2 |
|
4-Amino-2,2,5,5-Tetramethyl-3-Imidazoli-ne-1-yloxy, Free Radical, 99%
| 69826-42-2 |
|
3-Cyclopentyl-1-Propanol, 99%
| 767-05-5 |
|
3-(2-Bromoacetamido-methyl)-proxyl, free radical
| 84233-52-3 |
|
Methylcyclopentadiene dimer, 95%
| 26472-00-4 |
|
2,4-Dinitrobenzenesulfonic acid dihydrate 98%
| 89-02-1 |
|
1-(3-Hydroxyphenyl)-Urea, 98%
| 701-82-6 |
|
2,2'-Thiodiethanol, 99% (GC)
| 111-48-8 |
|
l-(-)-Menthol 99.7%
| 2216-51-5 |
|
Silver atomic absorption standard solution 1 mg/ml Ag in 0.5N HNO3
| 7440-22-4 |
|
1-Cyclohexylpiperazine, 98%
| 17766-28-8 |
|
2,6-Dichloropyridine, 98%
| 2402-78-0 |
|
Hexamethylphosphoramide, 98%
| 680-31-9 |
|
Methyl Cyclopropanecarboxylate, 98%
| 2868-37-3 |
|
Dichlorodiphenylsilane, 97+%
| 80-10-4 |
|
1-Bromotridecane, 99%
| 765-09-3 |
|
2,3-Dimethylcyclohexanol (Mixture of Isomers), 99%
| 1502-24-5 |
|
2',3',4',5',6'-Pentafluoroacetophenone,97%
| 652-29-9 |
|
Procaine hydrochloride, 99%
| 51-05-8 |
|
2-Phenylquinoline
| 612-96-4 |
|
Scandium Trifluoride, 99.5%
| 13709-47-2 |
|
Tert.-Amyl Alcohol
| 75-85-4 |
|
Tetrabutylammonium Hydroxide Solution (0.4M to 1M)
| 2052-49-5 |
|
Alpha-Bromo-P-Tolunitrile, 98%
| 17201-43-3 |
|
3-Hydroxybenzaldehyde, 98.5%
| 100-83-4 |
|
Diethoxymethane, 99% (GC)
| 462-95-3 |
|
Tris(4-methoxyphenyl)phosphine
| 855-38-9 |
|
Papain, Proteolytic Activity 46000-50000 nfu/mg
| 9001-73-4 |
|
Ellagic Acid Dihydrate, 97%
| 476-66-4 |
|
L(+)-Potassium hydrogen tartrate, 99%
| 868-14-4 |
|
Ethyl orange sodium salt, 92%
| 62758-12-7 |
|
l-Serine methyl ester hydrochloride, 98%
| 5680-80-8 |
|
1,2,4,5-Tetrakis(Bromomethyl)Benzene 98%
| 15442-91-8 |
|
Tetraethylammonium Bromide
| 71-91-0 |
|
Suberic Acid Monomethyl Ester, 97%
| 3946-32-5 |
|
5,8-Dihydro-1-Naphthol, 85%, Remainder 5,6,7,8-Tetrahydronaphthol
| 27673-48-9 |
|
4,5,8-Trimethylpsoralen
| 3902-71-4 |
|
Methyl 2-Trifluoromethylbenzoylacetate
| 0-01-1 |
|
d-Arginine, 99%
| 157-06-2 |
|
Pentafluorobenzenesulfonyl chloride, 99%
| 832-53-1 |
|
Benzo-15-crown-5, 99%
| 14098-44-3 |
|
Tetrahydrofuran (inhibited)
| 109-99-9 |
|
Tetrahydrofuran (uninhibited)
| 109-99-9 |
|
3,5-Dichloropyridine, 98%
| 2457-47-8 |
|
|