Search   
MSDS 
:
 2-Bromo-3-methylbutyric acid, 98%
CAS 
:
 565-74-2
SYNONYMS 
:
 Butanoic acid, 2-bromo-3-methyl-; 2-Bromoisovaleric acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 565-74-2 |Butanoic acid, 2-bromo-3-methyl- | 98 | 209-291-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Causes
burns.Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May be harmful if absorbed through the skin. May
cause skin rash (in milder cases), and cold and clammy skin with
cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May be harmful if swallowed. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Containers may explode
when heated.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 565-74-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 124 - 126 deg C @ 20.00mm Hg
Freezing/Melting Point: 40.00 - 42.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 107 deg C ( 224.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H9BrO2
Molecular Weight: 181.03

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 565-74-2: ES8055000
LD50/LC50:
CAS# 565-74-2: Oral, rat: LD50 = 769 mg/kg; Skin, rat: LD50 = 1410
mg/kg.
Carcinogenicity:
Butanoic acid, 2-bromo-3-methyl- -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 565-74-2: No information available.
Canada
CAS# 565-74-2 is listed on Canada's NDSL List.
CAS# 565-74-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 565-74-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 10/10/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Dimethylamino-2-Propyne 7223-38-3
(R)-(-)-3-Hydroxynonanal Dimethyl Acetal 272122-72-2
(R)-(-)-1,3-Nonanediol 23433-07-0
(R)-(+)-4-Hexyl-2,2-dimethyl-[1,3]-dioxane 139008-44-9
N,N''-(Methylenedi-4,1-phenylene)bis[N',2-(2-ethoxy)ethanol]urea 0-01-1
4-Cyano-Phenylglyoxylic Acid Ethyl Ester 302912-31-8
trans-beta-Styrenesulfonyl Chloride 52147-97-4
1-[1-(4-Chlorophenyl)Cyclobutyl]-3-Methylisobutylamine Citrate 84467-54-9
1,2,3,4-Tetrahydro-1-Naphthol, 85+% 529-33-9
3-Chloropropiophenone, 95% 936-59-4
Harmol hydrochloride monohydrate, 98% 40580-83-4
Di(1-benzotriazolyl)carbonate, 65%, 1,1,2-trichloroethane, 35% 79-00-5
6-Chloroimidazo[2,1-b]thiazole 23576-81-0
Bis-(6-carboxy-HOBt)-N-(2-aminoethyl) PS resin, 1% DVB, 1.3-1.7 00-01-1
(+/-)-NH4-4-Furyl-3-hydroxy-azetidin-2-one 00-01-1
4-N-FMOC-Amino-4-Carboxy-1,1-Dioxa-Tetrahydrothiopyran 369402-96-0
N-BOC-Amino-(3-Thienyl)Acetic Acid 40512-57-0
3-N-BOC-Amino-3-(4-fluorophenyl)propionic acid 284493-72-7
3-N-FMOC-Amino-3-(3-t-Butoxyphenyl)Propionic Acid 372144-16-6
N-FMOC-Amino-4-Ketocyclohexylcarboxylic Acid 285996-74-9
1-(3,5-DICHLOROPHENYL)-2-HYDROXYETHYLAMINE 372144-00-8
Chloroform 67-66-3
3-N-FMOC-AMINO-3-(2-T-BUTOXYPHENYL)PROPIONIC ACID 372144-18-8
3-N-BOC-AMINO-3-(3-CHLOROPHENYL)PROPIONIC ACID 284493-67-0
3-N-BOC-Amino-3-(4-methoxyphenyl)propionic acid 96363-20-1
N-BOC-AMINO-(4-N-FMOC-PIPERIDINYL)CARBOXYLIC ACID 368866-07-3
1-(3-PYRIDINYL)-2-HYDROXYETHYLAMINE 372144-01-9
2-Ethylhexanoic anhydride, 95+% 36765-89-6
N-BOC-AMINO-PIPERIDINYL-1,1-CARBOXYLIC ACID 252720-31-3
Cholesteryl Acetate, 97% 604-35-3
N-BOC-AMINO-(4-HYDROXYCYCLOHEXYL)CARBOXYLIC ACID 369403-08-7
Poly(titanium(iv)n-butoxide) 71-36-3
2-Bromo-3-methylbutyric acid, 98% 565-74-2
(R,R)-(-)-alpha,alpha'-Bis(trifluoromethyl)-9,10 00-01-1
(S,S)-(+)-alpha,alpha'-Bis(trifluoromethyl)-9,10 00-01-1
1-Hydroxybenzotriazole AM resin, 1% DVB, 0.8-1.2 mmol/g, 100-200 mesh 00-01-1
L-Diacetyltartaric acid AM resin, 1% crosslinked with DVB, 0.9-1.1 00-01-1
L-Tartaric acid methyl ester AM resin, 1% DVB, 0.9-1.1 mmol/g, 00-01-1
N-Cyclohexylcarbodiimide PS resin, 1% DVB, 0.8-1.2 mmol/g, 100-200 00-01-1
L(+)-Arabinose 87-72-9
3,4-Dimethyl-1,2-Cyclopentanedione, 97% 13494-06-9
2-Chloro-6-(diphenylphosphino)pyridine 162753-00-6
Dichloro(cycloocta-1,5-diene)ruthenium(II) polymer 50982-13-3
Dibromo-bis(diphenylphosphino)ethane ruthenium(II) dimer 00-01-1
5-Methoxyindole, 99% 1006-94-6
2,6-Bis(diphenylphosphino)pyridine 64741-27-1
Ammonium hexachlororhodate(iii), 99.99% 15336-18-2
Bis(diphenylphosphino)ethane-bis(2-methylallyl)ruthenium(II) 139060-44-9
HATU, 99% 148893-10-1
Sodium cyanoborohydride, 95% 25895-60-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net