Search   
MSDS 
:
 Cholesterol, 95+% (gc)
CAS 
:
 57-88-5
SYNONYMS 
:
 Cholest-5-en-3-beta-ol; Dythol; Cholesterine;     Beta-hydroxycholest-5-ene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 57-88-5 |CHOLESTEROL | 95.0+ | 200-353-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Keep from contact with oxidizing materials. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 57-88-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white to light yellow
Odor: almost odorless.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: 360 deg C
Freezing/Melting Point: 148.75 - 150.25 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.067
Molecular Formula: C27H46O
Molecular Weight: 386.65

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 57-88-5: FZ8400000
LD50/LC50:
Not available.
Carcinogenicity:
CHOLESTEROL -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 57-88-5: 1
Canada
CAS# 57-88-5 is listed on Canada's DSL List.
CAS# 57-88-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 57-88-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/04/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Diethyl(2,2-Diethoxypropyl)Phosphonate 0-01-1
Diethyl(2-Propenyl)Phosphonate 5954-65-4
2-Chloromandelic acid, 98% 10421-85-9
Chloroform, Reagent ACS, Spectro Grade 67-66-3
4,4'-Dimethylbiphenyl, 97% 613-33-2
Chloramphenicol, 98.0 - 102.0% 56-75-7
Chlorosulfonic acid, 98% 7790-94-5
Cholesterol, 95+% (gc) 57-88-5
Choline Chloride, P.A. 67-48-1
Propyl Bromoacetate, 98% 35223-80-4
1-(4-Chlorophenyl)-1H-pyrrole, 98% 5044-38-2
4-(2-Furyl)-3-Buten-2-One, 95% 623-15-4
2-Mercapto-5-nitrobenzimidazole, 97% 6325-91-3
(2-Pyrimidylthio)Acetic Acid, 98% 88768-45-0
Chromium(VI) oxide, flakes, 99.9% 1333-82-0
Chromium (III) Chloride Hexahydrate, 98% 10060-12-5
Chromium (III) Nitrate Nonahydrate, 99% 7789-02-8
Methyl 2-(Methylthio)Benzoate 3704-28-7
Cesium carbonate, 99.5% 534-17-8
Chromium(III) Oxide, 99%, Amorphous Powder 1308-38-9
FMOC-L-Alpha-Alanine, 98% 35661-39-3
(4-Chlorophenylthio)Acetic Acid 3405-88-7
Cobalt(II) Nitrate Hexahydrate, P.A. 10026-22-9
Cobalt (II,III) Oxide, - 325 Mesh 1308-06-1
Hematoxylin Hydrate, High Purity Biological Stain 1412-19-7
Cobalt (II) Acetate Tetrahydrate, 97% 6147-53-1
Cobalt(II) chloride hexahydrate, 99.999% 7791-13-1
Cobalt(II) sulfate heptahydrate, 99+% 10026-24-1
2-Naphthalenethiol, 99% 91-60-1
Collodion, Flexible 60-29-7
Strontium Fluoride, 99.99% 7783-48-4
4,4'-Azoxydiphenetole 4792-83-0
2,6,6-Trimethyl-2-cyclohexene-1,4-dione, 98% 1125-21-9
Tetraheptylammonium chloride 10247-90-2
2,3,4,5-Tetrafluorobenzoyl chloride, 99% 94695-48-4
2,3,4,5-Tetrafluorobenzotrifluoride, 99% 654-53-5
Copper Shot, 1-10 mm, 99.9% 7440-50-8
Cupferron, Reagent ACS 135-20-6
Methyl Phenylpropiolate, 98% 4891-38-7
Sodium Caprylate, 98% 1984-06-1
Agar 9002-18-0
Agarose 9012-36-6
Copper (II) Carbonate, Basic, 54-56% Copper 12069-69-1
Muscimol hydrate, 98+% 2763-96-4
Trans, Trans-1,3-Bis(4-Methoxybenzylidene)Acetone, 98% 2051-07-2
(S)-3-Hydroxy-gamma-butyrolactone, 97% 7331-52-4
Copper (II) Oxide, 98% 1317-38-0
Copper(II) sulfate, reagent, anhydrous, 98% 7758-98-7
Copper(II) sulfate pentahydrate, 98% 7758-98-7
Acetylcholine Bromide, 98% 66-23-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net