Search   
MSDS 
:
 2,4-Hexadiene, 99%, Mixture of Isomers
CAS 
:
 592-46-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 592-46-1 |2,4-Hexadiene, Mixture of Isomers | 99 | 209-757-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.Highly flammable.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Vapors may cause
dizziness or suffocation. Inhalation at high concentrations may
cause CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Extremely flammable liquid and vapor. Containers may
explode in the heat of a fire. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 592-46-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 82 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -3 deg C ( 26.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7200g/cm3
Molecular Formula: C6H10
Molecular Weight: 82.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 592-46-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Hexadiene, Mixture of Isomers -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: HEXADIENE
Hazard Class: 3
UN Number: 2458
Packing Group: II
IMO
Shipping Name: HEXADIENES
Hazard Class: 3.2
UN Number: 2458
Packing Group: II
RID/ADR
Shipping Name: HEXADIENES
Hazard Class: 3
UN Number: 2458
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 592-46-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 592-46-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 592-46-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/27/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N-Butyl Chloride 109-69-3
2,4-Hexadiene, 99%, Mixture of Isomers 592-46-1
3,5-Dichloro-2-Hydroxybenzenesulfonyl Chloride, 90-95%(Cl) 23378-88-3
1-Cyano-3-methylisothiourea, sodium salt, 94+% 67944-71-2
3-Methylbutyraldehyde, 98% 590-86-3
Styrene-d8, stabilized, 98+ atom% D 100-42-5
Calcium Iodide Tetrahydrate, 99% 13640-62-5
n-Butylamine 109-73-9
Glycine Tert-Butyl Ester Hydrochloride 99% (tlc) 27532-96-3
1-Bromo-2,4,5-Trifluorobenzene 99% 327-52-6
Decane 124-18-5
4'-Methoxyacetanilide, 99+% 51-66-1
2,6-Pyridinedimethanol, 98% 1195-59-1
4-Cyanobenzyltriphenylphosphonium chloride, 98% 20430-33-5
3-Amino-2,4,6-Triiodobenzoic Acid, 99+% 3119-15-1
Tert.-butyl sulfide, 98% 107-47-1
Methoxyacetic acid, 98% 625-45-6
2,4-Dichloropyrimidine, 97% 3934-20-1
2-Propanethiol, 98% 75-33-2
2,2'-Dimethoxybiphenyl, 98% 4877-93-4
3,5-Diiodo-l-tyrosine 300-39-0
Butyl 4-hydroxybenzoate 94-26-8
Ethynylestradiol 3-methyl ether, 97% 72-33-3
Triallylamine, 98% 102-70-5
1-Hydroxy-2,2,4,5,5-pentamethyl-3-imidazoline, 98% 39753-73-6
11-alpha-Hydroxyprogesterone, 95% 80-75-1
4-Phenylbutyric Acid, 97% (Titr.) 1821-12-1
Triisopentylamine, 99% (GC) 645-41-0
2'-Deoxycytidine Monohydrate, 99+% 951-77-9
8-(Diethylamino)Octyl 3,4,5-Trimethoxy-Benzoate Hydrochloride, 97% 53460-46-1
Hexamethylbenzene 87-85-4
2,2-Dichlorodiethylether, 99+% 111-44-4
3,3'-Carbonylbis(7-methoxycoumarin) 64267-17-0
2-Benzoylpyridine, 99+% 91-02-1
d-(-)-s-Acetyl-beta-mercaptoisobutyric acid, 99% 76497-39-7
1,3-Propanedithiol, 98% (gc) 109-80-8
3-Methylphenethyl Alcohol , 98% 1875-89-4
Oxalyl dihydrazide, 98% 996-98-5
Diphenylboric acid, ethanolamine complex 98% 524-95-8
N-Methylmorpholine 109-02-4
Hexacosane, 99% 630-01-3
Chromotropic Acid, Sodium Salt(Techn), 60% (Titr.) 3888-44-6
2-Chlorobenzyl Alcohol, 99% 17849-38-6
Di-n-octylamine (Pract), 95% (GC) 1120-48-5
1,2,4-Benzenetricarboxylic anhydride, 97% 552-30-7
Triphenylcarbenium hexafluorophosphate, 99% 437-17-2
(2R,3S)-2-Amino-3-Phenylthiobutanoic Acid, Hydrochloride, 99+% (80% 0-01-1
Hexafluorophosphoric Acid, 60 WT% Solution in Water 7732-18-5
4-(4-Anilinophenylazo)Benzenesulfonic Acid Sodium Salt, Indicator 554-73-4
5-Bromo-2-thiophenecarboxaldehyde, 97% 4701-17-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net