Search   
MSDS 
:
 Triisopentylamine, 99% (GC)
CAS 
:
 645-41-0
SYNONYMS 
:
 1-Butanamine, 3-Methyl-N,N-Bis(3-Methylbutyl)-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 645-41-0 |1-Butanamine, 3-Methyl-N,N-Bis(3-Methy| 99 | 211-441-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Aspiration may lead
to pulmonary edema. Can produce delayed pulmonary edema. Inhalation
at high concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Use with
adequate ventilation. Avoid contact with eyes, skin, and clothing.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Avoid ingestion and inhalation. Wash
clothing before reuse. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 645-41-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 112 deg C @ 10.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7790g/cm3
Molecular Formula: C15H33N
Molecular Weight: 227.43

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 645-41-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Butanamine, 3-Methyl-N,N-Bis(3-Methylbutyl)- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 645-41-0: No information available.
Canada
CAS# 645-41-0 is listed on Canada's NDSL List.
CAS# 645-41-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 645-41-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/03/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N-Butyl Chloride 109-69-3
2,4-Hexadiene, 99%, Mixture of Isomers 592-46-1
3,5-Dichloro-2-Hydroxybenzenesulfonyl Chloride, 90-95%(Cl) 23378-88-3
1-Cyano-3-methylisothiourea, sodium salt, 94+% 67944-71-2
3-Methylbutyraldehyde, 98% 590-86-3
Styrene-d8, stabilized, 98+ atom% D 100-42-5
Calcium Iodide Tetrahydrate, 99% 13640-62-5
n-Butylamine 109-73-9
Glycine Tert-Butyl Ester Hydrochloride 99% (tlc) 27532-96-3
1-Bromo-2,4,5-Trifluorobenzene 99% 327-52-6
Decane 124-18-5
4'-Methoxyacetanilide, 99+% 51-66-1
2,6-Pyridinedimethanol, 98% 1195-59-1
4-Cyanobenzyltriphenylphosphonium chloride, 98% 20430-33-5
3-Amino-2,4,6-Triiodobenzoic Acid, 99+% 3119-15-1
Tert.-butyl sulfide, 98% 107-47-1
Methoxyacetic acid, 98% 625-45-6
2,4-Dichloropyrimidine, 97% 3934-20-1
2-Propanethiol, 98% 75-33-2
2,2'-Dimethoxybiphenyl, 98% 4877-93-4
3,5-Diiodo-l-tyrosine 300-39-0
Butyl 4-hydroxybenzoate 94-26-8
Ethynylestradiol 3-methyl ether, 97% 72-33-3
Triallylamine, 98% 102-70-5
1-Hydroxy-2,2,4,5,5-pentamethyl-3-imidazoline, 98% 39753-73-6
11-alpha-Hydroxyprogesterone, 95% 80-75-1
4-Phenylbutyric Acid, 97% (Titr.) 1821-12-1
Triisopentylamine, 99% (GC) 645-41-0
2'-Deoxycytidine Monohydrate, 99+% 951-77-9
8-(Diethylamino)Octyl 3,4,5-Trimethoxy-Benzoate Hydrochloride, 97% 53460-46-1
Hexamethylbenzene 87-85-4
2,2-Dichlorodiethylether, 99+% 111-44-4
3,3'-Carbonylbis(7-methoxycoumarin) 64267-17-0
2-Benzoylpyridine, 99+% 91-02-1
d-(-)-s-Acetyl-beta-mercaptoisobutyric acid, 99% 76497-39-7
1,3-Propanedithiol, 98% (gc) 109-80-8
3-Methylphenethyl Alcohol , 98% 1875-89-4
Oxalyl dihydrazide, 98% 996-98-5
Diphenylboric acid, ethanolamine complex 98% 524-95-8
N-Methylmorpholine 109-02-4
Hexacosane, 99% 630-01-3
Chromotropic Acid, Sodium Salt(Techn), 60% (Titr.) 3888-44-6
2-Chlorobenzyl Alcohol, 99% 17849-38-6
Di-n-octylamine (Pract), 95% (GC) 1120-48-5
1,2,4-Benzenetricarboxylic anhydride, 97% 552-30-7
Triphenylcarbenium hexafluorophosphate, 99% 437-17-2
(2R,3S)-2-Amino-3-Phenylthiobutanoic Acid, Hydrochloride, 99+% (80% 0-01-1
Hexafluorophosphoric Acid, 60 WT% Solution in Water 7732-18-5
4-(4-Anilinophenylazo)Benzenesulfonic Acid Sodium Salt, Indicator 554-73-4
5-Bromo-2-thiophenecarboxaldehyde, 97% 4701-17-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net