Search   
MSDS 
:
 2,4-Dibromophenol, 99% (GC)
CAS 
:
 615-58-7
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 615-58-7 |2,4-Dibromophenol | 99 | 210-436-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.Toxic.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May be fatal if swallowed. May cause gastrointestinal irritation
with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation. Wash
clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Poison room
locked.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 615-58-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: brown - tan
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 36 - 38 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H4Br2O
Molecular Weight: 251.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, bromine fumes.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 615-58-7: SK8010000
LD50/LC50:
CAS# 615-58-7: Oral, mouse: LD50 = 282 mg/kg; Oral, rat: LD50 = 50
mg/kg; Skin, rabbit: LD50 = >2 gm/kg.
Oral, rat:
Carcinogenicity:
2,4-Dibromophenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 615-58-7: No information available.
Canada
CAS# 615-58-7 is listed on Canada's NDSL List.
CAS# 615-58-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 615-58-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/24/1999 Revision #2 Date: 12/03/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl N-(Diphenylmethylene)glycinate, 98% 69555-14-2
Methyl 4-(hydroxymethyl)benzoate, 98% 6908-41-4
Glyoxylic acid monohydrate, 98% 298-12-4
Trimethylhydroquinone, 97% 700-13-0
2,5-Difluoroaniline, 99% 367-30-6
Phosphoenolpyruvic acid cyclohexylamine salt, 98% (titr.) 10526-80-4
Exo-2-Chloro-5,5-Ethylenedioxy-Bicyclo[2.2.1]Heptane-Syn-7-Carboxylic 64812-08-4
6-Methyl-2-pyridinecarboxaldehyde, 97% 1122-72-1
Methyl methylsulfinylmethyl sulfide, 97% 33577-16-1
Trans-2,3-Dibromo-2-Butene-1,4-Diol, 97% 3234-02-4
1-Bromo-2,5-Dichloro-3-Fluorobenzene, 98% 0-00-1
(r)-(-)-Methyl mandelate, 98+% 20698-91-3
3-Bromo-4-Chlorobenzotrifluoride, 98+% 454-78-4
3-Nitrophthalic anhydride, 97% 641-70-3
Phenylphosphonic dichloride, 97% 824-72-6
5-tert-Butyl-m-xylene, 98% 98-19-1
2,4-Dibromophenol, 99% (GC) 615-58-7
Ytterbium(iii) oxide, 99% 1314-37-0
1,3-Indanedione, 97% 606-23-5
Nitrilotriacetic Acid, 99% 139-13-9
3-Ethoxypropionaldehyde diethyl acetal, 95% 7789-92-6
N-(Alpha, Alpha, Alpha-Trifluoro-M-Tolyl)Piperazine, 98%(Titr.) 15532-75-9
p-Bromoaniline 106-40-1
3-Hydroxy-3,7,11-Trimethyl-1,6,10-Dodecatriene, mixture of cis-trans, 7212-44-4
N-(Gamma-L-Glutamyl)-Alpha-Naphthylamide Monohydrate, 99% 81012-91-1
Acridine Yellow, 98% (UV-Vis) 135-49-9
Dibutyltin oxide, 98% 818-08-6
Dimethyl 4-nitrophthalate 610-22-0
1-Octadecene, Tech., 90% 112-88-9
Dibenzyl Malonate, Tech., 90% 15014-25-2
3-O-methyldopamine hydrochloride, p.a. 1477-68-5
3-Hydroxybenzophenone, 99% 13020-57-0
2,5-Dichloronitrobenzene, 99% 89-61-2
Diphenylsilanediol, 95% 947-42-2
Allyl glycidyl ether, 99+ % 106-92-3
(+)-Dihydrocarvone, 98%, mixture of isomers 5524-05-0
Semicarbazide Hydrochloride,98% 563-41-7
3-Fluoro-4-Nitrotoluene, 99+% 446-34-4
2,3-Dichloronitrobenzene, 99% 3209-22-1
N-(3-Bromo-2,4,6-Trimethylphenylcarbamoylmethyl)Iminodiacetic Acid, 78266-06-5
(3R,4R)-(-)-D-Erythronolactone, 99.5+% 15667-21-7
2-Phenylcyclohexanone, 98% 1444-65-1
4,4'-Dimethoxystilbene, 97% 4705-34-4
Ethyl-2-(2-Aminothiazol-4-yl)-2-Hydroxyimino Acetate, 97%, 64485-82-1
Benzo[b]tellurophene, 96% 0-01-0
Ethyl Isocyanoacetate, 97+% (GC) 2999-46-4
Chlorodiphenylphosphine, Tech., 95% 1079-66-9
4-Hydroxyephedrine hydrochloride, 99+% 7437-54-9
p-Toluoyl chloride, 98% 874-60-2
2,4-Difluoronitrobenzene, 99% 446-35-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net