Search   
MSDS 
:
 2,5-Dichloronitrobenzene, 99%
CAS 
:
 89-61-2
SYNONYMS 
:
 1,4-Dichloro-2-Nitrobenzene; Nitro-P-Dichlorobenzene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 89-61-2 |2,5-Dichloronitrobenzene | 99 | 201-923-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Remove all sources of
ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 89-61-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: <10 mbar @ 20 C
Viscosity: Not available.
Boiling Point: 267 deg C @ 760.00mm Hg
Freezing/Melting Point: 52.8 deg C
Autoignition Temperature: 485 deg C ( 905.00 deg F)
Flash Point: 152 deg C ( 305.60 deg F)
Explosion Limits, lower: 1.50 vol %
Explosion Limits, upper: 9.20 vol %
Decomposition Temperature: >300 deg C
Solubility in water: soluble in chloroform and alcohol
Specific Gravity/Density:
Molecular Formula: C6H3Cl2NO2
Molecular Weight: 192.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 89-61-2: CZ5260000
LD50/LC50:
CAS# 89-61-2: Draize test, rabbit, eye: 100 mg/24H Moderate; Draize
test, rabbit, skin: 500 mg/24H Mild; Oral, mouse: LD50 = 2850 mg/kg;
Oral, rat: LD50 = 1 gm/kg; Oral, rat: LD50 = 1210 mg/kg.
Carcinogenicity:
2,5-Dichloronitrobenzene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 28A After contact with skin, wash immediately with
plenty of water.
S 28B After contact with skin, wash immediately with
plenty of water and soap.
S 37 Wear suitable gloves.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 89-61-2: 2
Canada
CAS# 89-61-2 is listed on Canada's NDSL List.
CAS# 89-61-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 89-61-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/15/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl N-(Diphenylmethylene)glycinate, 98% 69555-14-2
Methyl 4-(hydroxymethyl)benzoate, 98% 6908-41-4
Glyoxylic acid monohydrate, 98% 298-12-4
Trimethylhydroquinone, 97% 700-13-0
2,5-Difluoroaniline, 99% 367-30-6
Phosphoenolpyruvic acid cyclohexylamine salt, 98% (titr.) 10526-80-4
Exo-2-Chloro-5,5-Ethylenedioxy-Bicyclo[2.2.1]Heptane-Syn-7-Carboxylic 64812-08-4
6-Methyl-2-pyridinecarboxaldehyde, 97% 1122-72-1
Methyl methylsulfinylmethyl sulfide, 97% 33577-16-1
Trans-2,3-Dibromo-2-Butene-1,4-Diol, 97% 3234-02-4
1-Bromo-2,5-Dichloro-3-Fluorobenzene, 98% 0-00-1
(r)-(-)-Methyl mandelate, 98+% 20698-91-3
3-Bromo-4-Chlorobenzotrifluoride, 98+% 454-78-4
3-Nitrophthalic anhydride, 97% 641-70-3
Phenylphosphonic dichloride, 97% 824-72-6
5-tert-Butyl-m-xylene, 98% 98-19-1
2,4-Dibromophenol, 99% (GC) 615-58-7
Ytterbium(iii) oxide, 99% 1314-37-0
1,3-Indanedione, 97% 606-23-5
Nitrilotriacetic Acid, 99% 139-13-9
3-Ethoxypropionaldehyde diethyl acetal, 95% 7789-92-6
N-(Alpha, Alpha, Alpha-Trifluoro-M-Tolyl)Piperazine, 98%(Titr.) 15532-75-9
p-Bromoaniline 106-40-1
3-Hydroxy-3,7,11-Trimethyl-1,6,10-Dodecatriene, mixture of cis-trans, 7212-44-4
N-(Gamma-L-Glutamyl)-Alpha-Naphthylamide Monohydrate, 99% 81012-91-1
Acridine Yellow, 98% (UV-Vis) 135-49-9
Dibutyltin oxide, 98% 818-08-6
Dimethyl 4-nitrophthalate 610-22-0
1-Octadecene, Tech., 90% 112-88-9
Dibenzyl Malonate, Tech., 90% 15014-25-2
3-O-methyldopamine hydrochloride, p.a. 1477-68-5
3-Hydroxybenzophenone, 99% 13020-57-0
2,5-Dichloronitrobenzene, 99% 89-61-2
Diphenylsilanediol, 95% 947-42-2
Allyl glycidyl ether, 99+ % 106-92-3
(+)-Dihydrocarvone, 98%, mixture of isomers 5524-05-0
Semicarbazide Hydrochloride,98% 563-41-7
3-Fluoro-4-Nitrotoluene, 99+% 446-34-4
2,3-Dichloronitrobenzene, 99% 3209-22-1
N-(3-Bromo-2,4,6-Trimethylphenylcarbamoylmethyl)Iminodiacetic Acid, 78266-06-5
(3R,4R)-(-)-D-Erythronolactone, 99.5+% 15667-21-7
2-Phenylcyclohexanone, 98% 1444-65-1
4,4'-Dimethoxystilbene, 97% 4705-34-4
Ethyl-2-(2-Aminothiazol-4-yl)-2-Hydroxyimino Acetate, 97%, 64485-82-1
Benzo[b]tellurophene, 96% 0-01-0
Ethyl Isocyanoacetate, 97+% (GC) 2999-46-4
Chlorodiphenylphosphine, Tech., 95% 1079-66-9
4-Hydroxyephedrine hydrochloride, 99+% 7437-54-9
p-Toluoyl chloride, 98% 874-60-2
2,4-Difluoronitrobenzene, 99% 446-35-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net