Search   
MSDS 
:
 4-Hydroxypyridine
CAS 
:
 626-64-2
SYNONYMS 
:
 4-Pyridinol; gamma-Hydroxypyridine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 626-64-2 |4-Hydroxypyridine | >95 | 210-958-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Exposures to doses of pyridine that are too low to produce overt
clinical symptoms can cause liver damage and repeated low-level
exposures can cause cirrhosis. Feeding studies in rats produced blood
effects like changes in clotting factors. Hazards associated with
pyridine may be seen in this product.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 626-64-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder and chunks
Color: beige to light brown
Odor: odorless
pH: 7 @ 50 g/l 20C
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 230-235 deg C @ 12 mm Hg
Freezing/Melting Point: 131-141 deg C
Autoignition Temperature: 515 deg C ( 959.00 deg F)
Flash Point: 221 deg C ( 429.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 350 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C5H5NO
Molecular Weight: 95.0411

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 626-64-2: UU7701450
LD50/LC50:
Not available.
Carcinogenicity:
4-Hydroxypyridine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 626-64-2: No information available.
Canada
CAS# 626-64-2 is listed on Canada's NDSL List.
CAS# 626-64-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 626-64-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/11/2000 Revision #2 Date: 11/10/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dichloromethane, extra dry, with molecular sieve, water < 50 ppm 75-09-2
Potassium Carbonate Sesquihydrate 584-08-7
Urazole, 97% 3229-73-0
(4S)-(-)-4-Isopropyl-2-oxazolidinone, 98% 17016-83-0
DL-5-Hydroxytryptophan, 99% 114-03-4
(4R)-(+)-4-Isopropyl-2-Oxazolidinone, 98% 95530-58-8
Ethyl 4-etoxybenzoate, 97% 23676-09-7
2,2,4-Trimethyl-1,3-pentanediol, 96% (gc) 144-19-4
Phenylmercuric nitrate, 62.5 - 64.0% Mercury 8003-05-2
Toluidine Blue O 92-31-9
Bentonite 1302-78-9
Nitrilotris(Methylene)Triphosphonic Acid 50 wt% Solution in Water 6419-19-8
1,1'-Bis(diphenylphosphino)ferrocene-palladium(II)dichloride 72287-26-4
1,3-Dimethylcyclohexane, mixture of cis and trans, 90% 591-21-9
3-(Dimethylamino)acrylonitrile 2407-68-3
Adenine, 99% 73-24-5
2,4-Dimethyl-2,6-heptadien-1-ol, mixture of isomers, 96% 80192-56-9
Cyclopropyl [4-(1,1-Dimethylethyl)Phenyl]- Methanone 38675-79-5
2,6-Dithiopurine 5437-25-2
N-Carbobenzyloxy-L-isoleucine, 97% 3160-59-6
4,4'-Dichlorobenzhydrol 90-97-1
1-Aminobenzotriazole, 98% 1614-12-6
Succinimide, 98% 123-56-8
N,N'-Dicyclohexylcarbodiimide, 25% solution in acetone 67-64-1
Cyclopropylamine, 80% solution in water, special grade for Novartis 765-30-0
4-Methylcatechol, 95% 452-86-8
N-(2-Hydroxyethyl)ethylenediaminetriacetic acid trisodium salt 139-89-9
Gallocyanine, chloride free 524-26-5
tert.-Butyl methyl sulfide, 97% 6163-64-0
5-Methylquinoxaline, 98% 13708-12-8
2-Methyl-3-propylpyrazine, 97% 15986-80-8
3-Acetyl-2,5-Dimethylfuran, 98% 10599-70-9
(s,s)-chiraphos, 97% 64896-28-2
cis-4-Hydroxy-D-proline, 99% 2584-71-6
Benzene 71-43-2
Tetraethylthiuram disulfide, 97% 97-77-8
1,2-Bis(trimethylsilyloxy)cyclobutene 17082-61-0
6-Hydroxy-2-naphthoic acid 16712-64-4
4-Hydroxypyridine 626-64-2
2,4,6-Trifluorobenzoyl chloride 79538-29-7
2,3,5,6-Tetrafluorobenzoyl chloride, 98% 107535-73-9
2,3-Dihydroxypyridine, 98% 16867-04-2
2,3,4,5-Tetrafluorobenzaldehyde 0-01-1
2,3,4-Trifluorobenzoyl chloride 157373-08-5
2,3,5,6-Tetrafluorobenzaldehyde 19842-76-3
2,3,5,6-Tetrafluorobenzoic acid 652-18-6
4-Bromo-2-fluorobenzoic acid 164149-28-4
2-Chloro-4-fluorobenzoic acid 2252-51-9
3-Mercapto-1-hexanol, 98% 51755-83-0
2-Isopropyl-4-methylthiazole, 99% 15679-13-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net