Search   
MSDS 
:
 2-Methyl-5-tert-butylthiophenol, 93% remainder isomer
CAS 
:
 7340-90-1
SYNONYMS 
:
 5-(1,1-Dimethylethyl)-2-methylthiophenol;     2-Methyl-5-(1,1-dimethylethyl)thiophenol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7340-90-1 |2-Methyl-5-tert-butylthiophenol | 93 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38 51 53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin. Toxic to aquatic organisms. May cause
long-term adverse effects in the aquatic environment.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Water may be ineffective. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7340-90-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 260 deg C @ 760.00mm Hg
Freezing/Melting Point: -10 deg C
Autoignition Temperature: Not applicable.
Flash Point: 123 deg C ( 253.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9800g/cm3
Molecular Formula: C11H16S
Molecular Weight: 180.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
No information found..
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7340-90-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methyl-5-tert-butylthiophenol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
R 51 Toxic to aquatic organisms.
R 53 May cause long-term adverse effects in the
aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37/39 Wear suitable gloves and eye/face
protection.
S 56 Do not discharge into drains or the
environment, dispose to an authorised waste collection
point.
WGK (Water Danger/Protection)
CAS# 7340-90-1: 2
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7340-90-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7340-90-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl 2-aminocyclohepta[b]thiophene-3-carboxylate, 99+% 0-01-1
(1R,2S)-(-)-Ephedrine hydrochloride, 99.0-101.0% (dry subst.) 50-98-6
Ir-125, Laser Grade 3599-32-4
Trimethyl(phenylseleno)silane, tech., ca 90% (gc) 3386-17-5
Guanosine 2'(3')-monophosphate, disodium salt monohydrate, mixed 14200-70-5
Diisobutylamine, 99% 110-96-3
4-Phenolsulfonic acid, sodium salt dihydrate, 99% 825-90-1
(R)-(-)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-48-0
3,4-Diaminopyridine, 98% 54-96-6
Pentafluorophenol, 99+% 771-61-9
Methyl 2-butynoate, ca 97 % 23326-27-4
Sodium Carbonate Decahydrate, C.P. 6132-02-1
3-Pentanone, 98% 96-22-0
2-Amino-5-Nitrobenzophenone, 98% 1775-95-7
Ethyl Oleate 111-62-6
4-Nitrobenzotrifluoride, 96% 402-54-0
4-Vinyl-1-cyclohexene, 99%,stabilized with 50-200 ppm bht 100-40-3
3-Nitrophenyl Isocyanate (Pract) 3320-87-4
Hydrazine Acetate, 99% (titr.) 7335-65-1
3-Iodoanisole, 97% 766-85-8
Vinyltrimethoxysilane, 98% 2768-02-7
(1S)-Chrysanthemolactone, 99+% 14087-71-9
2,5-Dimethylbenzaldehyde, 96% 5779-94-2
N-Methyl-N-propargylbenzylamine, 97% 555-57-7
2,2-Dichloroacetophenone, 97% 2648-61-5
Tetrabutylammonium fluoride trihydrate, 99% 87749-50-6
Alpha-(4-Pyridyl 1-Oxide)-N-Tert-Butyl-Nitrone, 99% 66893-81-0
2-Mercapto-5-methyl-1,3,4-thiadiazole, 99% 29490-19-5
m-Phenoxytoluene, 98+% 3586-14-9
trans-2-Pentene, 95% 646-04-8
3-Phenylpropionaldehyde, 97% (GC) 104-53-0
4-Nitro-2,1,3-benzothiadiazole 6583-06-8
(2-Hydroxybenzyl)triphenylphosphonium bromide, 98% 70340-04-4
2-Amino-6-Fluorobenzothiazole, 99% 348-40-3
R(-)-1,3-Butanediol, 98% 6290-03-5
Dextrin (Techn) 9004-53-9
3-(4-Dimethylamino-1-Naphthylazo)-4-Methoxybenzenesulfonic Acid, 98% 62758-14-9
1-Propanesulfonic Acid, 95% (Titr.) 5284-66-2
1,10-Dichlorodecane, 98% 2162-98-3
Dibutyl sebacate, 93% 109-43-3
Boron trifluoride-propanol 14% bf3 w/v in propanol 71-23-8
Cesium Bicarbonate 15519-28-5
2,4-Dihydroxypyrimidine-5-Carboxylic Acid Hydrate, 98% 23945-44-0
cis-2-Methylcyclohexanol, 99+% 7443-70-1
2-Methyl-5-tert-butylthiophenol, 93% remainder isomer 7340-90-1
Erucylamide , tech., 90% (gc) 112-84-5
2-Bromo-4-fluoroanisole, 98% 452-08-4
Triphenylphosphine oxide, 99% 791-28-6
5,10,15,20-Tetrakis(Pentafluorophenyl)- 21h,23h-Porphine 25440-14-6
Trimethylacetic acid, 99% 75-98-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net