Search   
MSDS 
:
 Tetrabutylammonium fluoride trihydrate,  99%
CAS 
:
 87749-50-6
SYNONYMS 
:
 TBAF
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 87749-50-6 |Tetrabutylammonium fluoride trihydrate| 99% | unlisted |
| | | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 87749-50-6:
United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 58 - 60 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C16H36FN.3H2O
Molecular Weight: 315.51

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Stron oxidizing agents - acids, hexamethyldisilazine + pyridine
N-oxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 87749-50-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutylammonium fluoride trihydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 87749-50-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 87749-50-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 87749-50-6 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl 2-aminocyclohepta[b]thiophene-3-carboxylate, 99+% 0-01-1
(1R,2S)-(-)-Ephedrine hydrochloride, 99.0-101.0% (dry subst.) 50-98-6
Ir-125, Laser Grade 3599-32-4
Trimethyl(phenylseleno)silane, tech., ca 90% (gc) 3386-17-5
Guanosine 2'(3')-monophosphate, disodium salt monohydrate, mixed 14200-70-5
Diisobutylamine, 99% 110-96-3
4-Phenolsulfonic acid, sodium salt dihydrate, 99% 825-90-1
(R)-(-)-2-Amino-3-hydroxy-3-methylbutanoic acid 2280-48-0
3,4-Diaminopyridine, 98% 54-96-6
Pentafluorophenol, 99+% 771-61-9
Methyl 2-butynoate, ca 97 % 23326-27-4
Sodium Carbonate Decahydrate, C.P. 6132-02-1
3-Pentanone, 98% 96-22-0
2-Amino-5-Nitrobenzophenone, 98% 1775-95-7
Ethyl Oleate 111-62-6
4-Nitrobenzotrifluoride, 96% 402-54-0
4-Vinyl-1-cyclohexene, 99%,stabilized with 50-200 ppm bht 100-40-3
3-Nitrophenyl Isocyanate (Pract) 3320-87-4
Hydrazine Acetate, 99% (titr.) 7335-65-1
3-Iodoanisole, 97% 766-85-8
Vinyltrimethoxysilane, 98% 2768-02-7
(1S)-Chrysanthemolactone, 99+% 14087-71-9
2,5-Dimethylbenzaldehyde, 96% 5779-94-2
N-Methyl-N-propargylbenzylamine, 97% 555-57-7
2,2-Dichloroacetophenone, 97% 2648-61-5
Tetrabutylammonium fluoride trihydrate, 99% 87749-50-6
Alpha-(4-Pyridyl 1-Oxide)-N-Tert-Butyl-Nitrone, 99% 66893-81-0
2-Mercapto-5-methyl-1,3,4-thiadiazole, 99% 29490-19-5
m-Phenoxytoluene, 98+% 3586-14-9
trans-2-Pentene, 95% 646-04-8
3-Phenylpropionaldehyde, 97% (GC) 104-53-0
4-Nitro-2,1,3-benzothiadiazole 6583-06-8
(2-Hydroxybenzyl)triphenylphosphonium bromide, 98% 70340-04-4
2-Amino-6-Fluorobenzothiazole, 99% 348-40-3
R(-)-1,3-Butanediol, 98% 6290-03-5
Dextrin (Techn) 9004-53-9
3-(4-Dimethylamino-1-Naphthylazo)-4-Methoxybenzenesulfonic Acid, 98% 62758-14-9
1-Propanesulfonic Acid, 95% (Titr.) 5284-66-2
1,10-Dichlorodecane, 98% 2162-98-3
Dibutyl sebacate, 93% 109-43-3
Boron trifluoride-propanol 14% bf3 w/v in propanol 71-23-8
Cesium Bicarbonate 15519-28-5
2,4-Dihydroxypyrimidine-5-Carboxylic Acid Hydrate, 98% 23945-44-0
cis-2-Methylcyclohexanol, 99+% 7443-70-1
2-Methyl-5-tert-butylthiophenol, 93% remainder isomer 7340-90-1
Erucylamide , tech., 90% (gc) 112-84-5
2-Bromo-4-fluoroanisole, 98% 452-08-4
Triphenylphosphine oxide, 99% 791-28-6
5,10,15,20-Tetrakis(Pentafluorophenyl)- 21h,23h-Porphine 25440-14-6
Trimethylacetic acid, 99% 75-98-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net