Search   
MSDS 
:
 Lipase AY30, according to amano's specification
CAS 
:
 9001-62-1
SYNONYMS 
:
 Amano N-AP; Butyrinase; E.C.3.1.1.3.; Fungal lipase; GA 56 (Enzyme);     Glycerol ester hydrolase; Lipase, fungal; Lipase, triacylglycerol;     Lipase, tricylglycerol; Plant lipase; Triacetinase; Triacylglycerol     hydrolase; Triacylglycerol lipase; Tributyrase; Tributyrin esterase;     Tributyrinase; Triglyceride hydrolase; Triglyceride lipase; Triolein     hydrolase;
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9001-62-1 |Lipase AY30, according to Amano's spec| | 232-619-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Moisture sensitive.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation. Do not
allow contact with water. Keep from contact with moist air and steam.
Do not breathe dust.
Storage:
Keep refrigerated. (Store below 4C/39F.) Keep containers tightly
closed. Store protected from moisture. Do not get water inside
containers. Store in a cool, dry area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 9001-62-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: beige
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: May decompose.
Specific Gravity/Density: Not available.
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9001-62-1: OJ0400700 TO9776500
LD50/LC50:
Not available.
Carcinogenicity:
Lipase AY30, according to Amano's specification -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 9001-62-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 9001-62-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9001-62-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N-Propyl Acetate, 99+% 109-60-4
Rhodizonic acid dipotassium salt, 95% (uv-vis) 13021-40-4
delta-Valerolactone, 99% 542-28-9
Octaethylporphine 2683-82-1
(2r,4r)-(-)-pentanediol, 99% 42075-32-1
3'-Chloropropiophenone, 98% 34841-35-5
16-Doxyl-Stearic Acid, Free Radical 53034-38-1
(Trifluoromethoxy)benzene, 99+% 456-55-3
N-Butyramide 99% 541-35-5
O-Acetylmandelic acid chloride, 95% 1638-63-7
2-Ethylhexyl cyanoacetate, 98+% 13361-34-7
Pyruvic aldehyde dimethyl acetal, 98% 6342-56-9
1,1'-Diethyl-2,2'-Cyanine Iodide, 99% (UV-Vis) 977-96-8
Isophthaloyl dichloride, 98% 99-63-8
Dibutyltin diacetate, pract. 1067-33-0
Methyl cinnamate, 98% 103-26-4
L-Cystine Dimethyl Ester Dihydrochloride 32854-09-4
Corn Oil, U.S.P./N.F. 8001-30-7
3-Iodobenzylamine hydrochloride, 97% 3718-88-5
4-Phenoxyphenol, 99% 831-82-3
1,10-Phenanthroline monohydrochloride monohydrate, 97% 3829-86-5
Ethyl 3-N-Ethyl-Aminoacrylate 55330-56-8
Phenetole, 99% 103-73-1
Nickel atomic absorption standard solution, 1 mg/ml Ni in 2% HNO3 7440-02-0
Ethyl Glycolate, 95% (GC) 623-50-7
Magnesium Fluoride, 98+% 7783-40-6
Homovanillic Acid, 98% 306-08-1
(R,R)-(-)-1,2-Dicyclohexyl-1,2-Ethanediol, 99% 120850-92-2
Methyl nicotinate, 99% 93-60-7
D-(+)-Talose, 99% 2595-98-4
1,3-Phenylenediacetic acid, 97% 19806-17-8
Ethyl 4-bromocrotonate, tech., 75% 37746-78-4
(s)-(-)-alpha-(1-Naphtyl)ethylamine, 99+%, 10420-89-0
Homophthalic acid, 99% 89-51-0
p-Xylene-alpha,alpha,alpha,alpha',alpha',alpha'-d6, 99+ atom % D 106-42-3
Coumestrol, 99% (UV-Vis) 479-13-0
2-Amino-5-nitropyridine, 99% 4214-76-0
2-Amino-5-Chlorobenzoxazole, 97% 61-80-3
alpha-Naphtholphthalein, indicator 596-01-0
3-Picoline, 99.5+% 108-99-6
Chromium(vi) oxide pyridine complex 20492-50-6
N-Butylcarbamate, 97% 592-35-8
6-Bromo-7-Nitroquinoxaline, 95% 113269-09-3
n-2-Acetylguanine, 99+% 19962-37-9
1,2:5,6-Di-O-Isopropylidene-Alpha-D-Allofuranose, 98% 2595-05-3
N-Cyanoimido Dimethyl Carbonate, 95% (on Dry Substance) 0-00-1
l-(-)-Glyceraldehyde 90 wt% aqueous solution 497-09-6
5-Aminoisophthalic Acid, 98+%(Titr.; Dry Substance) 99-31-0
Flufenamic Acid, 97% 530-78-9
Lipase AY30, according to amano's specification 9001-62-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net