SEALED AIR CORP -- INSTAPAK 40W COMPONENT B, POLYOL
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXWVK
MSDS NAME: INSTAPAK 40W COMPONENT B, POLYOL
Responsible Party
Name: SEALED AIR CORP
Address: 10 OLD SHERMAN TNPK
City: DANBURY CT 06810
Info Phone: 203-791-3500
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: SEALED AIR CORP INSTAPAK DIVISION
Address: OLD SHERMAN TPKE
City: DANBURY CT 06810
Phone: 203-791-3500/800-424-9300(CHEMTREC)
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: VAPORS MAY BE IRRITATING IF HOT. SKIN CONTACT:
REPEATED CONTACT MAY BE IRRITATING. EYE CONTACT: CAN CAUSE IRRITATION.
PERMANENT CORNEAL INJURY IS UNLIKELY. INGESTION: UNLIKELY. LARGE QUANT ITIES
COULD CAUSE IRRITATION OF MOUTH AND STOMACH.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: INHAL: REMOVE TO UNCONTAMINATED AREA. ADMINISTER OXYGEN IF
NECESSARY; CONSULT MD. SKIN: WASH AREA THOROUGHLY WITH SOAP & WATER.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. EYES: FLUSH WITH WATER FOR A T
LEAST 15 MINUTES, HOLDING LIDS OPEN WITH FINGERS. CONSULT MD. INGEST: DRINK
WATER TO DILUTE. CONSULT MD. TREATMENT IS SYMPTOMATIC.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ABSORB ON LOOSE ABSORBENT OR ABSORB WITH PILLOWS,
PADS OR SOCKS. EYE AND SKIN PROTECTION SHOULD BE WORN.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE OR DISPOSE OF IN ACCORDANCE WITH EXISTING
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS. ALSO SEE "RECOMMENDATIONS
FOR THE SAFE USE AND HANDLING OF INSTAPAK FOAM-IN-PLACE CHEMICALS" BU LLETIN.
Handling And Storage Precautions: STORAGE TEMPERATURE: MIN 35F (2C) MAX 110F
(43C). AVERAGE SHELF LIFE: 12 MONTHS.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: NONE
Extinguishing Media: CARBON DIOXIDE, CHEMICAL FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: THE USE OF RESPIRATORY PROTECTION SHOULD NOT BE NEEDED
UNDER NORMAL USE AND HANDLING CONDITIONS. IF PROTECTION IS CHOSEN, A
NIOSH/MSHA APPROVED, AIR PURIFYING RESPIRATOR, EQUIPPED WITH ORGANIC VAPOR C
ARTRIDGES, IS APPROPRIATE.
Ventilation: GOOD GENERAL VENTILATION.
Protective Gloves: CHEM RESISTANT BUTYL RUBBER, (SUPDAT)
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH STATION & SFTY SHOWER SHOULD BE AVAIL. SEE
"RECOMS FOR SAFE USE & HNDLG OF INSTAPAK FOAM-IN-PLACE (SUPDAT)
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: PROT GLOVES: NITRILE RUBBER OR POLYVINYL
ALCOHOL GLOVES. OTHER PROT EQUIP: CHEMICALS" BULLETIN BEFORE OPERATING
EQUIPMENT.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >201F,>94C
M.P/F.P Text: 20.0F,-6.7C
Vapor Pres: N/K (LOW)
Vapor Density: >1
Spec Gravity: 1.05 @ 25C
Solubility in Water: SOLUBLE
Appearance and Odor: CLEAR, STRAW COLORED LIQUID; SLIGHT AMINE ODOR.
Percent Volatiles by Volume: NIL
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE.
Materials To Avoid: ISOCYANATES; AVOID CONTACT UNLESS MIXED AT PROPER RATIO.
Hazardous Decomposition Products: BY FIRE OR EXTRME HEAT, OXIDES OF CARBON AND
NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INSTAPAK 40W COMPONENT B, POLYOL
Company: SEALED AIR CORP INSTAPAK DIVISION
Street: OLD SHERMAN TPKE
City: DANBURY CT
Zipcode: 06810
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 06/13/1995
Status Code: C
Label Date: 06/13/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION: VAPORS MAY BE IRRITATING IF HOT.
SKIN CONTACT: REPEATED CONTACT MAY BE IRRITATING. EYE CONTACT: CAN CAUSE
IRRITATION. INGESTION: LARGE QUANTITIES COULD CAUSE IRRITATION OF MOUTH AND
STOMACH. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.