HILORD CHEMICAL CORP -- INK PRINTING 1 (POSITIVE TONER CONCENTRATE),
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDNDN
MSDS NAME: INK PRINTING 1 (POSITIVE TONER CONCENTRATE), 2615001
Responsible Party
Name: HILORD CHEMICAL CORP
Address: 70 ENGINEERS RD
City: HAUPPAUGE NY 11788
Info Phone: 516-234-7373
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HILORD CHEMICAL CORP
Address: 70 ENGINEERS RD
City: HAUPPAUGE NY 11788-4004
Phone: 516-234-7373
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: HLTH STUDIES HAVE SHOWN THAT MANY PETRO HYDROCARBS &
SYNTHETIC LUBRICANTS POSE POTNTL HUMAN HLTH RISKS WHICH MAY VARY FROM PERS TO
PERS. AS PREC, EXPOS TO VAPS, MISTS/FUMES SHOULD BE MIN. ACUTE:EYE CO
NT:SLIGHTLY IRRIT BUT DOES NOT INJURE TISS. SKIN CONT:LOW ORDER OF TOX.
FREQUENT/PRLNG CONT MAY IRRIT &(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:CAUSE DERM. INHAL:HIGH
VAP/AEROSOL CONCS ARE IRRIT TO EYES & RESP TRACT, MAY CAUSE HDCHS, DIZZ,
ANESTH, DROW, UNCON, OTHER CNS EFTS & DEATH. INGEST:SM AMTS OF PROD ASPIR
INTO RESP SYS DURING INGEST/VOMIT MAY CAUSE MILD TO SEV PULMINJURY, POSS
PROGRESSING TO DEATH. MIN TOX. CHRONIC:LAB ANIMAL STUDIES
Medical Cond Aggravated By Exposure: SKIN CONTACT MAY AGGRAVATE AN EXISTING
DERMATITIS CONDITION.
First Aid: EYES:FLUSH W/LG AMTS OF WATER UNTIL IRRIT SUBSIDES (FOR AT LST 15
MINS). IF IRRIT PERSISTS, GET MD. SKIN:FLUSH W/LG AMTS OF WATER; USE SOAP IF
AVAIL. REMOVE GROSSLY CONTAM CLTHG & SHOES & LAUNDER BEFO RE REUSE.
INHAL:USING PROPER NIOSH APPRVD RESP PROT, IMMED REMOVE AFFECTED VICTIM FROM
EXPOS. ADMIN ARTF RESP IF BRTHG IS STOPPED. KEEP AT REST. CALL FOR PROMPT MED
ATTN. INGEST:DO NOT INDUCE (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: LAND SPILL:ELIM SOURCES OF IGNIT. PVNT ADDNL
DISCHARGE OF MATL, IF POSS TO DO SO W/OUT HAZ. SM SPILLS:IMPLEMENT CLEANUP
PROCS; LG SPILLS:IMPLEMENT CLEANUP PROCS & IF IN PUBLIC AREA, KEEP PUBLIC
AWAY & ADVISE AUTHS. PVNT LIQ FROM ENTERING
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). CONSULT AN EXPERT ON DISPOSAL OF RECOVERED MATERIAL &
ENSURE CONFORMITY TO LOCAL DISPOSAL REGULATIONS.
Handling And Storage Precautions: STOR, LOADING & UNLOADING TEMP:AMBIENT.
STOR/TRANSPORT PRESS:ATM. ELECTROSTATIC ACCUM HAZ, USE PROPER GROUNDING PROC.
LIQ IS VOLAT & GIVES OFF(SUPDAT)
Other Precautions: EITHER LIQ/VAP MAY SETTLE IN LOW AREAS/TRAVEL SOME DIST
ALONG GROUND/SURF TO IGNIT SOURCES WHERE THEY MAY IGNITE/EXPLODE. IN ORDER TO
PVNT FIRE/EXPLO HAZS, USE APPROP EQUIP. INFO ON ELEC EQUIP APPROP FOR USE
W/PROD MAY BE FOUND IN
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 100F,38C
Lower Limits: 0.6%
Upper Limits: 7%
Extinguishing Media: FOAM, WATER SPRAY (FOG), DRY CHEM, CARBON DIOXIDE &
VAPORIZING LIQ TYPE EXTING AGENTS. FOR MORE INFO, CONT NEHC (FP N).
Fire Fighting Procedures: USE NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N).
SHUT OFF "FUEL" TO FIRE. AVOID SPRAYING WATER DIRECTLY INTO STOR CNTNRS DUE
TO DANGER OF BOILOVER. WATER(SUPDAT)
Unusual Fire/Explosion Hazard: COMBUSTIBLE LIQUID, CAN FORM COMBUST MIXTS AT
TEMPS AT/ABOVE FL PT. STATIC DISCHARGE - MATL CAN ACCUM STATIC CHARGES WHICH
CAN CAUSE INCENDIARY ELEC DISCHARGE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHERE CONCENTRATIONS IN AIR MAY EXCEED LIMITS GIVEN
& ENGINEERING, WORK PRACTICE OR OTHER MEANS OF EXPOSURE REDUCTION ARE NOT
ADEQUATE, NIOSH APPROVED RESPIRATORS MAY BE NECESSARY TO PREVENT OVEREXPOS
URE BY INHALATION.
Ventilation: MECH DILUTION VENT IS REC WHENEVER PROD IS USED IN CONFINED SPACE,
HEATED ABOVE AMBIENT TEMPS OR AGITATED. USE (SUPDAT)
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH FOUNTAIN & DELUGE SHOWER (FP
N). FOR OPEN SYSTEMS WHERE CONT IS LIKELY, WEAR LONG SLEEVES.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). FIRST AID PROC:VOMIT. KEEP AT REST. GET PROMPT
MED ATTN. HNDLG/STOR PREC:INVISIBLE VAPS. VENT:USE EXPLO-PROOF VENT EQUIP.
FIRE F IGHT PROC:MAY BE INEFT, BUT SHOULD BE USED TO KEEP FIRE-EXPOS CNTNRS
COOL. IF LEAK/SPILL HAS IGNITED, USE WATER
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >309F,>154C
M.P/F.P Text: -76F,-60C
Vapor Pres: 10 @ 100F
Vapor Density: 5.14
Spec Gravity: 0.75
Evaporation Rate & Reference: 0.4 (N-BUTYL ACETATE=1)
Appearance and Odor: BLACK LIQUID; FAINT ISOPARAFFINIC HYDROCARBON ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: NONE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INK PRINTING 1 (POSITIVE TONER CONCENTRATE), 2615001
Company: HILORD CHEMICAL CORP
Street: 70 ENGINEERS RD
City: HAUPPAUGE NY
Zipcode: 11788-4004
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/16/1997
Status Code: C
Label Date: 04/16/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:EYE CONTACT:SLIGHTLY IRRITATING.
SKIN CONTACT:LOW ORDER OF TOXICITY. FREQUENT OR PROLONGED CONTACT MAY
IRRITATE AND CAUSE DERMATITIS. INHALATION:IRRITATION TO EYES AND RESPIRATORY
T RACT, MAY CAUSE HEADACHE, DIZZINESS, ANESTHESIA, DROWSINESS,
UNCONSCIOUSNESS AND OTHER CENTRAL NERVOUS SYSTEM EFFECTS.
INGESTION:ASPIRATION HAZARD. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|