DRYDEN OIL INC -- GRAPHITE 2
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDZQS
MSDS NAME: GRAPHITE 2
Responsible Party
Name: DRYDEN OIL CO INC
Address: 9300 PULASKI HWY
City: BALTIMORE MD 21220
Info Phone: 410-574-5000; 800-777-1466
Emergency Phone Number: 410-574-5000; 800-777-1466
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DRYDEN OIL CO INC
Address: 9300 PULASKI HWY
City: BALTIMORE MD 21220
Phone: 301-574-5000
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE/CHRONIC: SKIN: PROLONGED OR REPEATED SKIN CONTACT
MAY CAUSE IRRITATION. EYES: MAY CAUSE IRRITATION. INGESTION: RELATIVELY
NON-TOXIC. HEALTH STUDIES HAVE SHOWN THAT MANY PETROLEUM HYDROCARBONS AN D
SYNTHETIC LUBRICANTS POSE POTENTIAL HUMAN HEALTH RISKS WHICH MAY VARY FROM
PERSON TO PERSON. (EFTS OF OVEREXPOSURE)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: AS A PRECAUTION, EXPOSURE TO
LIQUIDS, VAPORS, MISTS OR FUMES SHOULD BE MINIMIZED.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: FLUSH W/CLEAR WATER FOR AT LEAST 15 MIN/UNTIL IRRIT SUBSIDES.
IF IRRIT PERSISTS, CALL MD. SKIN: REMOVE ANY CONTAM CLTHG & WASH SKIN
THORO W/SOAP & WATER. INGEST: DO NOT INDUCE VOMIT. CALL MD IMM ED. INHAL:
VAP PRESS IS VERY LOW. VAP INHAL UNDER AMBIENT TEMP CNDTNS IS NOT NORM A
PROBLEM. IF OVERCOME BY VAP FROM HOT PROD, IMMED REMOVE FROM EXPOS & CALL
MD. ADMIN OXYGEN, IF AVAIL.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: RPT SPILLS AS REQUIRED TO APPROP AUTH. U.S. COAST
GUARD REGS REQUIRE IMMED REPORTING OF SPILLS THAT COULD REACH ANY WATERWAY
INCL INTERMITTENT DRY CREEKS. RPT SPILLS TO COAST GUARD TOLL FREE # 800-424
-8802. RECOVER FREE PROD. ADD SAND, EARTH/
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN AN ENVIRONMENTALLY SAFE MANNER AND IN
ACCORDANCE WITH ALL GOVERNMENT REGULATIONS TO INCLUDE FEDERAL, STATE, AND
LOCAL REQUIREMENTS.
Handling And Storage Precautions: MIN BRTHG VAP, MIST/FUMES. AVOID PRLNG/RPTD
CONT W/SKIN. USE PROD W/CAUTION AROUND HEAT, SPKS, PILOT LIGHTS, STATIC
ELECTRICITY & OPEN FLAME.
Other Precautions: "EMPTY" CONTRS RETAIN RESIDUE (LIQ &/VAP) & CAN BE
DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND/EXPOSE
SUCH CONTRS TO HEAT, FLAME, SPKS/OTHER SOURCES OF IGNIT; THEY MAY EXPLODE
& CAUSE INJURY/DEATH.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: 340F,171C
Extinguishing Media: FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CARBON DIOXIDE AND
VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures: WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N).
PLAN FIRE PROT & RESPONSE STRATEGY THRU CONSULTATION W/LOC FIRE PROT
AUTH/APPROP SPECIALISTS. WATER/ (SUP DAT)
Unusual Fire/Explosion Hazard: NONE. FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, AND OTHER DECOMPOSITION PRODUCTS, IN THE CASE OF INCOMPLETE
COMBUSTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH APPROVED SUPPLIED-AIR RESPIRATORY PROTECTION
IN CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation: USE LOC EXHST TO CAPTURE VAP, MIST/FUMES, IF NEC. PROVIDE VENT
SUFFICIENT TO PVNT EXCEEDING REC EXPOS LIM OR
Protective Gloves: CHEMICAL-RESISTANT GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EMER EYEWASH & DELUGE SHOWER (FP N).
USE CHEM-RESIST APRON/OTHER IMPERVIOUS CLTHG, IF NEEDED,
Work Hygienic Practices: REMOVE CONTAM CLTHG & LAUNDER/DRY-CLEAN BEFORE REUSE.
REMOVE CONTAM SHOES & THORO CLEAN BEFORE REUSE;
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). FIRE FIGHT PROC: FOAM MAY CAUSE FROTHING. USE
WATER TO KEEP FIRE-EXPOSED CONTRS COOL. WATER SPRAY MAY BE USED TO FLUSH S
PILLS AWAY FROM EXPOS. MINIMIZE BRTHG OF GASES, VAP, FUMES/DECOMP PRODS.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NEGLIGIBLE
Vapor Density: HVR/AIR
Spec Gravity: 0.91 (H*2O=1)
Evaporation Rate & Reference: NEGLIGIBLE
Solubility in Water: NEGLIGIBLE (
Appearance and Odor: DARK GRAY, SEMI-SOLID, BLAND ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID HEAT AND OPEN FLAMES.
Materials To Avoid: AVOID OXIDIZING MATERIALS.
Hazardous Decomposition Products: THERMAL DECOMP PRODS ARE HIGHLY DEPENDENT ON
COMBUST CNDTNS. A COMPLEX MIX OF AIRBORNE SOLID, LIQ, PARTICULATES
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: GRAPHITE 2
Company: DRYDEN OIL CO INC
Street: 9300 PULASKI HWY
City: BALTIMORE MD
Zipcode: 21220
Health Emergency Phone: 410-574-5000; 800-777-1466
Label Required IND: Y
Date Of Label Review: 07/11/1997
Status Code: C
Label Date: 07/11/1997
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN: PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE IRRITATION. EYES: MAY CAUSE IRRITATION. INGESTION: RELATIVELY
NON-TOXIC. HEALTH STUDIES HAVE SHOWN THAT MANY PETROLEUM HYDROCARBONS AND
SYNTHE TIC LUBRICANTS POSE POTENTIAL HUMAN HEALTH RISKS WHICH MAY VARY FROM
PERSON TO PERSON. AS A PRECAUTION, EXPOSURE TO LIQUIDS, VAPORS, MISTS OR
FUMES SHOULD BE MINIMIZED. CHRONIC: NONE LISTED BY MANUFAC TURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
GRAPH-TITE (BT)
| |
|
1074 BULTI-COOL (BULK) ALL PURPOSE SOLUBLE OIL
| |
|
PIRANAMITE (D-LIMONENE DEGREASER)
| |
|
TEF-PASTE (BT)
| |
|
TOOL COOL (CATCH THE WAVE) (CUTTING AND TAPPING FLUID)
| |
|
TVL-MZ (ENGINE TREATMENT)
| |
|
ATTACK (BULK)
| |
|
ATTACK II
| |
|
TRX GEAR OIL 85/140
| |
|
TRX GEAR OIL 85/140
| |
|
KLASS-10 + 1 AEROSOL
| |
|
A-189
| 4420-74-0
2530-87-2
33580-59-5
67-56-1
7783-06-4
108-88-3 |
|
MT-55 ACCULUBE ALL NLGI GRADES, 55C-0
| |
|
9537 THICK FILM COMPOSITION
| |
|
ANHYDROL SOLVENT SPECIAL, PM-4081, 190 PROOF
| 64-17-5
67-56-1
108-10-1
7732-18-5
67-63-0
75-07-0 |
|
SILVER (HARD, HEAVY BUILD) PLATING SOLUTION, 30308303
| |
|
SILVER (HARD, HEAVY BUILD) PLATING SOLUTION, 30308304
| |
|
SILVER (HARD, HEAVY BUILD) PLATING SOLUTION, 30308305
| |
|
10K000 19S EPOXY CATALYST A (GLOSS)
| |
|
SURE KLEAN RESTORATION CLEANER
| |
|
SOFTWELD 55N1
| 7787-32-8
1317-65-3
7440-44-0
7440-50-8
65996-67-0
7440-02-0
60676-86-0
1633-05-2 |
|
STAINWELD 308L-16
| 13463-67-7
1317-65-3
1344-09-8
7440-47-3
7789-75-5
65996-74-9
1332-58-7
65996-67-0
7440-21-3
7440-47-3
7440-02-0
7439-89-6 |
|
STAINWELD 316L-16
| 13463-67-7
1317-65-3
1344-09-8
7440-47-3
7789-75-5
65996-74-9
1332-58-7
65996-67-0
7440-21-3
7440-47-3
7440-02-0
7439-98-7
7439-89-6 |
|
2 FUEL OIL, HOVIC-8
| 68476-30-2
91-20-3 |
|
HEXANE, 11487
| 110-54-3
71-43-2
108-88-3 |
|
MULTI-WHITE LUBRICANT 2
| |
|
GRAPHITE 2
| |
|
E-Z STIR FILLER SEALER, 053
| |
|
OMC JOHNSON/EVINRDE TCW3, R00000347025
| |
|
SUN GOLD, EFD 400 M 9055
| 25036-25-3
1317-65-3
7440-50-8
7440-66-6 |
|
RAVEN, EFB504S0055
| 25036-25-3
7727-43-7
1333-86-4 |
|
WALL KOTE EGGSHELL ENAMEL PAINT, NEUTRAL BASE 45-000
| 1317-65-3
1332-58-7
8052-41-3
13463-67-7
14808-60-7 |
|
WALL KOTE EGGSHELL ENAMEL PAINT, WHITE BASE 45-904
| 1317-65-3
1332-58-7
8052-41-3
13463-67-7
14808-60-7 |
|
HUMIDIFIER BACTERIA ALGAE TREATMENT
| 68391-01-5
68956-79-6 |
|
STAINWELD 310-16, AWS E310-16
| 7440-47-3
7440-02-0
7439-89-6
13463-67-7
1317-65-3
1344-09-8
7439-96-5
7789-75-5
7440-21-3 |
|
A-1177-B-1, #3010370
| |
|
A-1177-B-2, #3010360
| |
|
AUTOMATE RED BSF
| |
|
CODE ARC 8018-B2 MR
| 7439-89-6
1317-65-3
7789-75-5
1344-09-8
1332-58-7
13463-67-7
7440-47-3
7440-21-3
1633-05-2
7439-96-5
7439-98-7
14808-60-7
7439-89-6 |
|
EASY ARC 308 AC-DC, E308-16
| 7440-47-3
13463-67-7
7440-02-0
1332-58-7
1317-65-3
1344-09-8
7439-96-5
14808-60-7
7789-75-5
65996-67-0
7440-21-3
7439-89-6 |
|
A-1177-B-2, #3010360
| |
|
BPI COLOR DEVELOPER BPI LENSE PREP II
| |
|
RIGID BODY SPLICE KITS W/HIGH GEL 4442, PART A (SUPPLE)
| 8001-22-7
25655-35-0
64742-52-5 |
|
RIGID BODY SPLICE KITS W/HIGH GEL 4442, PART B (SUPPLE)
| 64742-52-5
69102-90-5
71302-79-9
7396-58-9 |
|
PC:946-242 (700G) KONICA DEVELOPER 1790
| |
|
SCOTCH BRAND POYURETHANE PROT TAPE ADH PROMOTOR #86
| 67-63-0
108-88-3
68989-76-4 |
|
CREST 1110 B POLYAMINE CATALYST
| |
|
82325 SUPER LUBE SYNTH LUBRICANT W/TEFLON
| 68649-12-7
68611-44-9
116-14-3 |
|
1250 IMPERIAL DTB
| 25265-77-4
107-21-1 |
|
04022 DOUBLE BUBBLE GREEN/BEIGE D50 PART A
| 101-68-8 |
|
|