CAAP INC -- CAAPCOAT PLYURETHANE CURING AGENT
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-235-0827
MSDS Num: CKNMN
MSDS NAME: CAAPCOAT PLYURETHANE CURING AGENT
Responsible Party
Name: CAAP CO INC
Address: 152 PEPE'S FARM RD
City: MILFORD CT 06460
Info Phone: 203-877-0375
Emergency Phone Number: 703-527-3887
Chemtrec IND/Phone: (800)424-9300
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CAAP CO INC
Address: 152 PEPE'S FARM RD
City: MILFORD CT 06460
Phone: 203-877-0375
=======================================================
Item Description Information
=======================================================
Item Manager: GSA
Item Name: COATING KIT,RAIN EROSION RESISTING
Unit of Issue: KT
UI Container Qty: 0
Type of Container: KIT
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Effects of Exposure: CONTACT MAY DAMAGE EYE , IRRITATE SKIN, AND CAUSE
RESPIRATORY IRRITAITON UPON INHALATION. CHRONIC HEALTH HAZARDS: REPEATED OR
PROLONGED EXPOSURE MAY CAUSE DEFATTING OF THE SKIN, DERMATITIS, AND POSS IBLE
SENSITIZATION. INHALATION OF VERY HIGH VAPOR CONCENTRATIONS OR PROLONGED
EXPOSURE MAY CAUSE NEURAL DYSFUNCTION, KIDNEY AND LIVER DAMAGE.
Signs And Symptions Of Overexposure: VAPOR EXPOSURE: BURNING EYES, HEADACHE,
DIZZINESS, THROAT IRRITATION. LOSS OF APPETITE. NAUSEA. CONTACT: MAY CAUSE
IRRITATION OF SKIN, BURING OF SKIN OR EYES.
Medical Cond Aggravated By Exposure: PREEXISTING ALLERGIES, EYE,SKIN AND
RESPIRATORY DISORDERS.
First Aid: EYES: FLUSH WITH WATER, GET IMMEDIATE MEDICAL ATTENTION. SKIN:
REMOVE CONTAMINATED CLOTHING. WASH SKIN PROMPTLY WITH SOAP AND WATER.
REPEAT IF NECESSARY. IF SIGNS AND SYMPTOMS OF EXPOSURE EXIST, GET IMMEDIATE
MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR, GIVE ARTIFICIAL
RESPIRATION IF NECESSARY, GET IMMEDIATE MEDICAL ATTENTION. INGESTION: DO
NOT INDUCE VOMITING GET IMMEDIATE MEDICA L ATTENTION IF VOMITING OCCURS
SPONTANEOUSLY. KEEP VICTIM'S HEAD BELOW HIS HIPS TO PREVENT BREATHING VOMITUS
INTO LUNGS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION &DO NOT SMOKE IN
THE AREA. WEAR PROTECTIVE EQUIPMENT INCLUDING SOLVENT RESISTANT GLOVES,
APRON, BOOTS, &A SCBAIN THE PRESSURE DEMAND MODE OR A POSITIVE PRESSURE
AIR-SUP PLIED RESPIRATOR. CONTAIN THE SPILL WITH DIKES OF ABSORBENT MATERIAL
AND SOAK UP THE SPILL WITH THE ABSORBENT MATERIAL. CLEAN UP THE ABSORBENT
AND CONTAIN SECURELY. *
Waste Disposal Methods: INCINERATION IN AN APPROPRIATELY DESIGNED AND LICENSED
INCUNERATOR IS PROFERRED THIS IS A RCRA HAZARDOUS IGNITABLE WASTE.
REGULATIONS MAY VARY FROM STATE TO STATE. DISPOSE OF ACCORDING TO STATE, LOC
AL, AND FEDERAL REGULATIONS WHEN THE FP-200, CURING AGENT AND ACCELERATOR ARE
MIXED TOGETHER AND THE SOLVENT IS ALLOWED TO EVAPORATE,**
Other Precautions: ** THE SOLID END PRODUCT IS A NON-HAZARDOUSE LANDFULL ITEM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TOC
Flash Point: =23.3C, 74.F
Flash Point Text: TOC74F
Lower Limits: 1.2
Upper Limits: 8
Extinguishing Media: CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures: USUAL METHODS FOR FLAMMABLE LIQUIDS. THE PRODUCT IS
NOT MISCIBLE WITH WATER. ALTHOUGH WATER MAY BE USED TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard: NONE, PROUDUCT IS A FLAMMABLE LIQUID.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF USE CONDITIONS GENERATE VAPORS OR MISTS WEAR A
NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THOSE EMISSION LEVELS AT POINT OF
USE. APPROPRIATE RESPIRATORS INCLUDE A FULL FACEPIECE OR A PURIFYING CAR
TIRDGE EQUIPPED FOR ORGANIC VAPORS AND MISTS, A SELF-CONTAINED BREATHING
APPARATUS IN THE PRESSURE DEMAND MODE, OR A POSITIVE PRESSURE AIR-SUPPLIED
RESPIRATOR.
Ventilation: VENTILATION: A SPRAY BOOTH IS REQUIRED FOR SPRAY APPLICATIONS.
Protective Gloves: SOLVENT RESISTENT GLOVES
Eye Protection: SOLVENT RESISTENT GOGGLES
Other Protective Equipment: AN EYEWASH AND SAFETY SHOWER SHOULD BE NEARBY AND
READY FOR USE.
Work Hygienic Practices: WASH WELL AFTER USE.
Supplemental Safety and Health: ONLY PROPERLY TRAINED AND PROTECTED PERSONNEL
SHOULD BE IN THE IMMEDIATE SPRAY AREA. THE EXHAUST VENTILATION SHOULD BE
SUFFICIENT TO KEEP THE AIRBORNE CONCENTRATIONS BELOW THE PEL'S. VENTILATION
SYS TEMS SHOULD BE DESIGNED TO DRAW AIR PAST THE OPERATOR, THEN PAST THE
SOURCE OF THE VAPOR. AND THEN TO THE EXHAUST.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >116.1C, 241.F
B.P. Text: 241-281F ( 116-138C )
Vapor Pres: ( MM HG ) : 8
Vapor Density: AIR=1 3.6
Spec Gravity: 1.007 ( COATING )
VOC Pounds/Gallon: 4.92
VOC Grams/Liter: 590
Evaporation Rate & Reference: .85
Solubility in Water: INSOLLUABLE COAT
Appearance and Odor: LIGHT TO DRK GRY OR GRN LIQUID, AROMATIC SOLVENT O
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: THE PRODUCT IS STABLE BUT SHOULD BE KEPT AWAY
FROM ALL IGNITION SOURCES, HOT SURFACES, AND TEMPERATURE ABOVE 100 F ( 38 C )
Materials To Avoid: THE PRODUCT IS INCOMPATIBLE WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, OXIDES OF
NITROGEN, AS WELL AS TRACES OF HCN MAY BE RELEASED DURING COMBUSTION.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: VENTILIATION SHOULD BE IN ACCORDACNE WITH ACGIH
GUIDELINES AS CONTAINED IN ITS INDUSTRIEAL VENTILATION PUBICATION.
=======================================================
Ecological Information
=======================================================
Ecological: *SWEEP AND WET MOP THE AFFECTED AREA WITH SOAP AND WATER.
VENTILATED THE AREA AS WELL AS POSSIBLE.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: THE USER MUST BE FULLY PROTECTED FROM EXPOSURE TO THE
MATERIAL CURING MIXING AND SPRAY APPLICATION. IF EXPOSURE MIGHT OCCUR A FULL
PERMEATION RESISTANT PROTECTIVE SUIT INCLUDING HEAD COVERING, FACE S HIELD,
GLOVES, AND OVERSHORES IS REQUIRED.
=======================================================
Other Information
=======================================================
Other Information: THE FOLLOWING CHEMICALS ARE SPECIFICALLY LISTED BY
INDIVIDUAL STATES: OTHER PRODUCT SPECIFIC HEALTH AND SAFETY DATA IN OTHER
SECTIONS OF THE MSDS MAY ALSO BE APPLICABLE FOR STATE REQUIREMENTS. FOR D
ETAILS ON YOUR REGULATOR REQUIREMENTS YOU SHOULD CONTACT THE APPRPRIATE
AGENCY IN YOUR STATE. WHILE THE INFORMATION CONTAINED IN THIS MSDS IS
BELIEVED TO BE ACCURATE. CAAP CO, INC. MAKES NO WARRAN TY WITH RESPECT
THERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON. THE INFORMATION
CONTAINED HEREIN WAS COMPILED IN ACCORDANCE WITH APPLICABLE FEDERAL
REGULATIONS AND IS BASED UPON INFORMATIO N PROVIDED BY OUR SUPPLIERS. `
=======================================================
Transportation Information
=======================================================
Trans ID NO: 153459
MSDS NAME: CAAPCOAT PLYURETHANE CURING AGENT
MSDS Prepared Date: 04/01/1996
Review Date: 09/17/1999
Multiple KIT Number: 0
Unit Of Issue: KT
Container QTY: 0
Type Of Container: KIT
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: LFD
DOT Proper Shipping Name: PAINT
DOT PSN Modifier: INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER, AND LIQUID LACQUER BASE
Hazard Class: 3
UN ID Num: UN1263
DOT Packaging Group: II
Label: FLAMMABLE LIQUID
Special Provision: B52,T7,T30
Packaging Exception: 150
Non Bulk Pack: 173
Bulk Pack: 242
Max Qty Pass: 5 L
Max Qty Cargo: 60 L
Vessel Stow Req: B
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: LCP
IMO Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
IMO PSN Modifier: (INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING PAINT
THINNING OR REDUCING COMPOUND) o
IMDG Page Number: 3268
UN Number: 1263
UN Hazard Class: 3.2
IMO Packaging Group: I/II *
Subsidiary Risk Label: -
EMS Number: 3-05
MED First Aid Guide NUM: 310
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: SXI
IATA UN ID Num: 1263
IATA Proper Shipping Name: PAINT
IATA PSN Modifier: (INCLUDING
PAINT,LACQUER,ENAMEL,STAIN,SHELLAC,VARNISH,POLISH,LIQUID FILLER AND LIQUID
LACQUER BASE)
IATA UN Class: 3
IATA Label: FLAMMABLE LIQUID
UN Packing Group: II
Packing Note Passenger: 305
Max Quant Pass: 5L
Max Quant Cargo: 60L
Packaging Note Cargo: 307
Exceptions: A7,A72
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: SXI
AFI Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
AFI PSN Modifier: (INCLUDING PAINT,LACQUER,ENAMEL,STAIN,SHELLAC
SOLUTIONS,VARNISH,POLISH,LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING
PAINT THINNING OR REDUCING COMPOUNDS)
AFI Hazard Class: 3
AFI UN ID NUM: UN1263
AFI Packing Group: II
Special Provisions: P5
Back Pack Reference: A7.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CAAPCOAT PLYURETHANE CURING AGENT
Company: CAAP CO INC
Street: 152 PEPE'S FARM RD
City: MILFORD CT
Zipcode: 06460
Health Emergency Phone: 703-527-3887
Label Required IND: Y
Date Of Label Review: 06/08/2000
Status Code: A
Origination Code: G
Hazard And Precautions: CONTACT MAY DAMAGE EYE , IRRITATE SKIN, AND CAUSE
RESPIRATORY IRRITAITON UPON INHALATION. CHRONIC HEALTH HAZARDS: REPEATED OR
PROLONGED EXPOSURE MAY CAUSE DEFATTING OF THE SKIN, DERMATITIS, AND POSS IBLE
SENSITIZATION. INHALATION OF VERY HIGH VAPOR CONCENTRATIONS OR PROLONGED
EXPOSURE MAY CAUSE NEURAL DYSFUNCTION, KIDNEY AND LIVER DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|