QUAKER STATE CORPORATION -- LUBRIGUARD MULTI-PURPOSE LITHIUM EP2 GREASE,3
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CKNWD
MSDS NAME: LUBRIGUARD MULTI-PURPOSE LITHIUM EP2 GREASE,3-02-11005
Responsible Party
Name: QUAKER STATE CORPORATION
Address: 255 E JOHN CARPENTER FREEWAY
City: IRVING TX 75062
Info Phone: 800-562-5928
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Resp. Party Other MSDS No.: ID: LBGD-012
Preparer's Name: VINCE BERNARD
Chemtrec IND/Phone: (800)424-9300
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: QUAKER STATE CORPORATION
Address: 255 E JOHN CARPENTER FREEWAY
City: IRVING TX 75062
Phone: 800-562-5928
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NO INFORMATION IS AVAILABLE.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: IRRITATING TO THE EYES. SKIN: PROLONGED &/OR
REPEATED CONTACT MAY CAUSE IRRITATION/DERMATITIS. IF MATERIAL IS INJECTED
BENEATH THE SKIN, TISSUE DAMAGE MAY RESULT. INGESTION: CAN CAUSE GASTROINTE
STINAL IRRITATION, NAUSEA, VOMITING & DIARRHEA. SMALL AMOUNTS OF THIS
PRODUCT, IF ASPIRATED INTO THE LUNGS, MAY CAUSE MILD TO SEVERE PULMONARY
INJURY, POSSIBLY DEATH. INHALATION: INHALATION OF OIL MIS TS OR FUMES CAN
CAUSE IRRITATION OF THE NOSE, THROAT & UPPER RESPIRATORY TRACT. REPEATED
& PROLONGED OVEREXPOSURE TO OIL MISTS MAY RESULT IN DROPLET DEPOSITION,
OIL GRANULOMA FORMATION, INFLAMMATION & INCREASED INCIDENCE OF
INFECTION.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: EYES: FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MINS. GET MED ATTN
IF IRRIT DEVELOPS/PERSISTS. SKIN: REMOVE CONTAM CLTHG. WASH AFFECTED AREA
W/MILD SOAP & WATER. GET MED ATTN IF SKIN DISORDER DEVELOPS . LAUNDER
CONTAM CLTHG BEFORE REUSE. IF PROD IS INJECTED UNDER SKIN, GET MED ATTN
IMMED. DO NOT WAIT FOR SYMPS TO DEVELOP. INGEST: DO NOT INDUCE VOMIT. CALL
YOUR LOC POS CTL CTR/GET MED ATTN. INHAL: R EMOVE TO FRESH AIR. IF NOT BRTHG,
APPLY ARTF RESP. GET MED ATTN IF SYMPS PERSIST. NOTES TO MD: HIGH PRESS SKIN
INJECTION: MD MUST BE FAMILIAR W/LOC PROC FOR TREATMENT OF THIS TYPE OF
WOUND: INCISION, IRRIGATION, REMOVAL OF ALL (SUP DAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN DISCHARGED MATL. SCRAPE UP SPILLED MATL,
SHOVEL INTO WASTE CONTR. PERS NOT WEARING PROT EQUIP SHOULD BE EXCLUDED FROM
AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED. WEAR APPROP PROT EQUIP &
CLTHG DURING CLEAN-UP. SURFS MAY BECOME SLIPPERY AFTER SPILLAGE. REMOVE
SOILED CLTHG & LAUNDER BEFORE REUSE. AVOID SKIN CONT & INHAL OF VAPS
DURING DISP OF SPILLS.
Waste Disposal Methods: PRODUCT AS SHIPPED DOES NOT MEET THE DEFINITION OR
CHARACTERISTIC OF A HAZARDOUS WASTE. NO INFORMATION IS AVAILABLE ON COMPONENT
WASTE NUMBERS. ALL WASTES MUST BE HANDLED IN ACCORDANCE WITH LOCAL, STA TE
AND FEDERAL REGULATIONS.
Handling And Storage Precautions: AVOID THE GENERATION OF OIL MISTS. AVOID
BREATHING FUMES IF THIS PRODUCT IS USED AT HIGH TEMPERATURES. USE WITH
ADEQUATE VENTILATION. AVOID GETTING THIS MATERIAL INTO CONTACT WITH YOUR SKIN
AND EYES.
Other Precautions: KEEP THE CONTAINER TIGHTLY CLOSED AND IN A COOL,
WELL-VENTILATED PLACE. DO NOT STORE THIS MATERIAL IN OPEN OR UNLABELED
CONTAINERS. STORE AWAY FROM STRONG OXIDIZERS. STORE AT TEMPERATURES BELOW
120F ( 50C) TO PRESERVE FOR INTENDED USE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL, FOAM, CARBON DIOXIDE. WATER MAY BE AN
INEFFECTIVE EXTINGUISHING MEDIUM. WATER STREAM MAY SPREAD FIRE. USE WATER TO
COOL FIRE-EXPOSED CONTAINERS & TO PROTECT PERSONNEL.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). FIREFIGHTERS SHOULD AVOID INHALING ANY COMBUSTION PRODUCTS.
Unusual Fire/Explosion Hazard: PROD IS A NON-FLAM GREASE. IT WILL NOT FLASH
SPONT. IT MAY IGNITE IF EXPOSED TO OPEN FLAME. PROD MAY RELEASE TOX
VAPS/FUMES UPON HEATING. INCOMPLETE COMBUST CAN YIELD CARBON (SMOKE), CARBON
MONOXIDE, CARBON DIOXIDE, VARIOUS HYDROCARBONS, HYDROGEN SULFIDE, OXIDES OF
ZINC & EVOLVE OTHER TOX GASES, VAPS & SOLID RESIDUE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: FOR CONCENTRATIONS UP TO 25 MG/M3, NIOSH APPROVED
HALF-MASK ORGANIC VAPOR RESPIRATOR. UP TO 50 MG/M3, NIOSH APPROVED FULL-FACE
ORGANIC VAPOR RESPIRATOR OR FULL-FACE SELF-CONTAINED RESPIRATOR. FOR CONC
ENTRATIONS GREATER THAN 50 MG/M3, FIRE FIGHTING OR UNKNOWN CONCENTRATION, USE
NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS WITH POSITIVE PRESSURE
MODE.
Ventilation: USE IN WELL-VENTILATED AREA. ADDITIONAL AREA VENTILATION OR LOCAL
EXHAUST MAY BE REQUIRED TO MAINTAIN AIR CONCENTRATIONS BELOW RECOMMENDED
EXPOSURE LIMITS.
Protective Gloves: WEAR RESISTANT GLOVES SUCH AS NEOPRENE OR NITRILE.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). USE OF IMPERVIOUS APRON AND BOOTS ARE RECOMMENDED.
Work Hygienic Practices: USE GOOD HYGIENE WHEN HANDLING PETROLEUM PRODUCT. WASH
HANDS AFTER HANDLING AND BEFORE EATING. LAUNDER WORK CLOTHES FREQUENTLY.
Supplemental Safety and Health: FIRST AID PROCEDURES: NECROTIC TISSUE AND OPEN
WOUND DRESSING. PULMONARY ASPIRATION HAZARD IF SWALLOWED; TREAT
SYMPTOMATICALLY.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Density: >1 (AIR=1)
Spec Gravity: 0.90
Evaporation Rate & Reference: SLOWER THAN N-BU AC
Appearance and Odor: DARK AMBER GREASE. ODOR NOT AVAILABLE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID EXCESSIVE HEAT, FORMATION OF MISTS. AVOID
CONTACT WITH STRONG OXIDIZERS.
Materials To Avoid: THIS PRODUCT MAY REACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: INCOMPLETE COMBUSTION CAN YIELD CARBON
(SMOKE), CARBON MONOXIDE, CARBON DIOXIDE, VARIOUS HYDROCARBONS, HYDROGEN
SULFIDE, OXIDES OF ZINC AND EVOLVE OTHER TOXIC GASES, VAPORS AND SOLID
RESIDUE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: IF SKIN INJECTION OCCURS, TISSUE NECROSIS MAY OCCUR.
ORGANIC ZINC ADDITIVE MAY CAUSE SEVERE EYE IRRITATION INCLUDING A RISK OF
IRREVERSIVLE DAMAGE. NONE OF THIS PRODUCT'S COMPONENTS ARE LISTED BY ACGI H,
IARC, OSHA, NIOSH, OR NTP. EPIDEMIOLOGY/TERATOGENICITY: NO DATA AVAILABLE FOR
THIS PRODUCT. NEUROTOXICITY/MUTAGENICITY: NO DATA AVAILABLE ON THIS PRODUCT
AS A WHOLE. OTHER TOXICOLOGICAL INFORMATION : PERSONS WITH SKIN OR
RESPIRATORY CONDITIONS MAY BE MORE SENSITIVE TO PRODUCT.
=======================================================
Ecological Information
=======================================================
Ecological: ECOTOXICITY: NO INFORMATION IS AVAILABLE ON ECOTOXICITY OF THIS
PRODUCT. KEEP PRODUCT OUT OF SEWERS AND WATERWAYS. ENVIRONMENTAL FATE: NO
INFORMATION IS AVAILABLE.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: US DOT INFORMATION: SHIPPING NAME: NOT REGULATED AS A
HAZARDOUS MATERIAL. HAZARD CLASS: NONE. UN/NA #: NONE. PACKING GROUP: NONE.
REQUIRED LABEL(S): NONE. ADDITIONAL INFO: NONE. INTERNATIONAL TRANSPOR TATION
REGULATIONS: NOT REGULATED AS DANGEROUS GOODS.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THIS MATERIAL CONTAINS ONE OR MORE OF THE FOLLOWING
CHEMICALS TO BE IDENTIFIED UNDER SARA SECTION 302 (40 CFR 355 APPENDIX A),
SARA SECTION 313 (40 CFR 372.65) AND/OR CERCLA (40 CFR 302.4): ORGANIC ZI NC
ADDITIVE (PROPRIETARY).
SARA 313: FORM R REPORTING REQUIRED FOR 1.0% DE MINIMUS CONCENTRATION (RELATED
TO ZINC COMPOUNDS).
Federal Regulatory Information: ALL COMPONENTS OF THIS PRODUCT ARE LISTED ON
THE U.S. EPA TSCA INVENTORY. NO COMPONENTS ARE LISTED IN THE W IDL (CANADA).
State Regulatory Information: NO COMPONENTS REQUIRE LABELING UNDER CALIFORNIA
PROPOSITION 65.
=======================================================
Other Information
=======================================================
Other Information: NFPA RATINGS: HLTH: 1; FIRE: 1; REACTIVITY: 0. HAZ SCALE:
0=MINIMAL, 1=SLIGHT, 2=MODERATE, 3=SERIOUS, 4=SEV. RATINGS: HLTH: 1; FIRE:
1; REACTIVITY: 0; PERSONAL PROT: GLOVES, CHEM GOGGLES, RESP IF NECESSARY.
HAZ SCALE: 0=MINIMAL, 1=SLIGHT, 2=MODERATE, 3=SERIOUS, 4=SEV, +**CHRONIC
HAZARD. THIS PROD HAS BEEN REVIEWED USING THE CRITERIA SPECIFIED IN 29 CFR
1910.1200 (HAZARD COMMUNICATION STANDARD ). GENERAL COMMENTS: CHEMTREC
EMERGENCY TELEPHONE NUMBER IS TO BE USED IN THE EVENT OF CHEM EMERGENCIES
INVOLVING A SPILL, LEAK, FIRE, EXPOSURE/ACCIDENT INVOLVING CHEMICALS. ALL
NON-EMER QUESTIONS SHO ULD BE DIRECTED TO CUSTOMER SERVICE.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: LUBRIGUARD MULTI-PURPOSE LITHIUM EP2 GREASE,3-02-11005
Company: QUAKER STATE CORPORATION
Street: 255 E JOHN CARPENTER FREEWAY
City: IRVING TX
Zipcode: 75062
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 06/14/2000
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: IRRIT TO THE EYES. SKIN: PRLNGD/RPTD CONT
MAY CAUSE IRRIT/DERM. IF MATL IS INJECTED BENEATH THE SKIN, TISSUE DMG MAY
RSLT. INGEST: CAN CAUSE GASTROINTESTINAL IRRIT, NAUS, VOMITING & DIARR .
SMALL AMTS OF THIS PRODUCT, IF ASPIRATED INTO THE LUNGS, MAY CAUSE MILD TO
SEVERE PULMONARY INJURY, POSSIBLY DEATH. INHALATION: INHALATION OF OIL MISTS
OR FUMES CAN CAUSE IRRITATION OF THE NOSE, THR OAT & UPPER RESPIRATORY
TRACT ,REPEATED & PROLONGED OVEREXPOSURE TO OIL MISTS MAY RESULT IN
DROPLET DEPOSITION, OIL GRANULOMA FORMATION, INFLAMMATION & INCREASED
INCIDENCE OF INFECTION. CHRONIC: NONE SPECIFIED BY MANUFACTURER (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|