HYBRITECH INCORPORATED -- SODIUM AZIDE 0.1% SOLUTION
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CKTSF
MSDS NAME: SODIUM AZIDE 0.1% SOLUTION
Responsible Party
Name: HYBRITECH INCORPORATED
Box: 269006
City: SAN DIEGO CA 92196-9006
Info Phone: 800-854-1957
Emergency Phone Number: 800-424-9300
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HYBRITECH INCORPORATED
Box: 269006
City: SAN DIEGO CA 92196-9006
Phone: 800-854-1957
=======================================================
Ingredients
=======================================================
Cas: 26628-22-8
RTECS #: VY8050000
Name: SODIUM AZIDE
Percent by Wt: .1
ACGIH STEL: .3 MG/M3
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: THRESHOLD LIMIT VALUE: N/A. EFFECTS OF OVEREXPOSURE: N/A.
First Aid: IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES OR SKIN WITH COPIOUS
AMOUNTS OF WATER. REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE. IF
INGESTED, CONTACT A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: IT IS IMPORTANT DURING DISPOSAL TO FLUSH DRAINS WITH
COPIOUS AMOUNTS OF WATER TO PREVENT AZIDE ACCUMULATION.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE AND
LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE. THE MEDICAL
DIAGNOSTICS KIT THAT HYBRITECH MANUFACTURES ARE TO BE REFRIGERATED, UNLESS
OTHERWISE SPECIFIED IN KIT INSERT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: USE DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH-APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: CONTACT WITH COPPER OR LEAD DRAIN PIPES MAY
RESULT IN THE FORMATION OF POTENTIALLY EXPLOSIVE AZIDE DEPOSITS. NOTE: AZIDE
REACTS WITH MANY HEAVY METALS SUCH AS LEAD, COPPER, MERCURY, SILVER AND GOLD
TO FORM EXPLOSIVE COMPOUNDS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: A NIOSH-APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN (FP N).
Protective Gloves: RUBBER OR LATEX.
Eye Protection: ANSI APPROVED CHEMICAL SAFETY GOGGLES (FP N).
Other Protective Equipment: USERS OF THE REAGENTS MAY WEAR LAB COAT, GLOVES
(RUBBER, LATEX, ETC.) AND SAFETY GOGGLES WHEN HANDLING. EYEWASH AND DELUGE
SHOWER MEETING ANSI DESIGN CRITERIA (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.850
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER (FP N).
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: ACIDS, HEAVY METALS (I.E., LEAD, GOLD, COPPER, ETC.),
BROMINE, CARBON DISULFIDE, CHROMYL CHLORIDE, DIBROMOMALONITRILE, DIMETHYL
SULFATE.
Hazardous Decomposition Products: SODIUM & OXIDES OF NITROGEN.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: N/P. FEDERAL REGULATORY (CONT): 0.1%. AFP: ANTI-PAP
CONJUGATE: 0.1%. SUBSTRATE WASH IV: 0.1%. PAP ANTIBODY TABS: 0.05%.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: N/P. STATE REGS (CONT): STREP B: 0.1%. STRATUS:
PSA FLUOROMETRIC ENZYME IMMUNOASSAY: 0.1%. CEA FLUOROMETRIC ENZYME
IMMUNOASSAY: 0.1%. AFP FLUOROMETRIC ENZYME IMMUNOASSAY: 0.1%. PAP
FLUOROMETRIC ENZYM E IMMUNOASSAY: 0.1%. OTHER: (REAGENTS AVAILABLE
SEPARATELY): PHOTON ERA SUBSTRATE SET: 0.1%. TANDEM-R HCG ZERO DILUENT SET:
0.1%. TANDEM HCG QUANTITATIVE SET: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-E AF
P ZERO DILUENT SET: 0.1%. TANDEM ICON QSR CKMB ZERO DILUENT SET: 0.1%. TANDEM
ICON QSR CKMB CONTROL SET: 0.1%. TANDEM-E CKMB II CONTROL SET: 0.1%. TANDEM
ICON QSR HCG ZERO DILUENT: 0.1%. TANDEM ICON Q SR HCG CONTROL SET: 0.1%.
(FEDERAL REGS)
Federal Regulatory Information: N/P. SARA III (CONT): TANDEM ICON. STREP B
REAGENTS B & C: 0.1%. TANDEM ICON STREP A REAGENT B: 0.1%. ACID WASH
SOLUTION: SUBSTRATE SET: 0.1% TANDEM ICON II HCG CONTROL SET (SERUM): 0.1%.
STRATUS: P SA: ANTI-PSA CONJUGATE: 0.1%. SUBSTRATEWASH IV: 0.1%. PSA HIGH
SAMPLE DILUENT: 0.1%. PSA CALIBRATORS A,B,C,D,E,F: 0.1%. PSA CONTROLS: 0.1%.
AFP: ANTI-AFP CONJUGATE: 0.05%. SUBSTRATE WASH IV: 0.1%. AF P HIGH SAMPLE
DILUENT: 0.1%. AFP CALIBRATORS A,B,C,D,E,F: 0.1%. AFP CONTROLS: 0.1%. CEA:
ANTI-CEA CO NJUGATE: 0.1%. SUBSTRATE WASH IV: 0.1%. CEA HIGH SAMPLE DILUENT:
0.1%. CEA CALIBRATORS A,B,C,D,E,F: 0.1%. CEA CONTROLS: (TRANSPORT INFO)
State Regulatory Information: N/P. OTHER INFO (CONT):TANDEM-R HCG (TOTAL BETA
HCG): 0.1% (WASH CONCENTRATE-0.3%). TANDEM-R HGH: 0.1% (WASH
CONCENTRATE-0.3%). TANDEM-R IGE II: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-R
PAP: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-R PSA: 0.1% (WASH
CONCENTRATE-0.3%). TANDEM-R TSH HS: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-R
PROLACTIN: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-R CA 195: 0.1% (WASH
CONC-0.3%). IMMUNO CONCENTRATION ASSAY KITS: TANDEM ICON QSR HCG: 0.1%.
TANDEM ICON QSR CKMB: 0.1%. TANDEM ICON II HCG URINE: 0.1% (WASH CONC-0.3%).
TANDEM ICON II HCG SERUM: 0.1% (WASH CONC-0.3%).TANDEM ICON STREP A: 0.1%.
TANDEM ICON (SARA III)
=======================================================
Other Information
=======================================================
Other Information: SODIUM AZIDE IS USED AS A PRESERVATIVE IN THE REAGENTS OF
EACH PRODUCT. PERCENTAGE PER REAGENT IN EACH KIT: IMMUNO ENZYMETRIC ASSAY
KITS: TANDEM-E AFP: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-E CEA: 0.1% .
TANDEM-E CKMB II: 0.1%. TANDEM-E FERRITIN: 0.1% (WASH CONCENTRATE-0.3%).
TANDEM-E HCG: 0.1%. TANDEM-E IGE II: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-E
PROLACTIN: 0.1% (WASH CONCENTRATE-0.3%). TANDEM-E TSH: 0.1%. TANDEM-E PSA:
0.1%. TANDEM-E PAP: 0.1%. TANDEM-E TSH HS: 0.1%. IMMUNO RADIOMETRIC ASSAY
KITS: TANDEM-R CEA: 0.1%. TANDEM-R FERRITIN: 0.1% (WASH CONCENTRATE-0.3%).
TANDEM-R HCG: 0.1% (WASH CONCENTRATE-0.3%). (STATE REGS)
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SODIUM AZIDE 0.1% SOLUTION
Company: HYBRITECH INCORPORATED
PO Box: 269006
City: SAN DIEGO CA
Zipcode: 92196-9006
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 10/05/2000
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: NO
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: SODIUM AZIDE CAN REACT WITH METALS TO FORM EXPLOSIVE
METAL AZIDES. ACUTE: NONE SPECIFIED BY MANUFACTURER (FP N). CHRONIC: NONE
SPECIFIED BY MANUFACTURER (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|