ITW FLUID PRODUCTS GROUP -- KILLCIDE 700 INDUSTRIAL BIOCIDE 1 GAL = 77012
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CKTLN
MSDS NAME: KILLCIDE 700 INDUSTRIAL BIOCIDE 1 GAL = 77012
Responsible Party
Name: ITW FLUID PRODUCTS GROUP
Address: 3624 WEST LAKE AVENUE
City: GLENVIEW IL 60025
Info Phone: 800-452-5823
Emergency Phone Number: 800-424-9300
Preparer's Name: DEBBIE MAKITA
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ITW FLUID PRODUCTS GROUP
Address: 3624 WEST LAKE AVENUE
City: GLENVIEW IL 60025
Phone: 800-452-5823
=======================================================
Ingredients
=======================================================
Cas: 4719-04-4
RTECS #: XZ1600000
Name: HEXAHYDRO-1,3,5-TRIS(2-HYDROXYETHYL)-S-TRIAZINE
% low Wt: 50.
% high Wt: 80.
------------------------------
Cas: 3811-73-2
RTECS #: UT9000000
Name: INDUSTRIAL FUNGICIDE
% low Wt: 1.
% high Wt: 10.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: UNLIKELY AT NORMAL ROOM TEMPERATURES. AT
ELEVATED TEMPERATURES EYE, NOSE AND THROAT IRRITATION MAY OCCUR. SKIN/EYE:
SLIGHT IRRITATION. INGESTION: NAUSEA AND VOMITING. ACUTE: SLIGHT IRRITAI ON.
CHRONIC: EFFECTS ARE NOT KNOWN
Medical Cond Aggravated By Exposure: SKIN DISORDERS.
First Aid: EYE: FLUSH W/ WATER FOR 15 MINS. SKIN: WASH WITH SOAP AND
WATER.REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE.INGESTION: DO NOT
INDUCE VOMITING, DO NOT GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PE RSON. IF
VOMITING OCCURS KEEP HEAD BELOW HIPS TO PREVENT ASPIRATION OF LIQUID INTO
LUNGS. OBTAIN MEDICAL ATTENTION IF IRRITATION PERSISTS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PREVENT SKIN AND EYE CONTACT. MOP UP OR USE ABSORBANT
MATERIAL, WASH AREA, DISCARD IN SUITABLE CONTAINERS.
Waste Disposal Methods: REMOVE TO A WASTE DISPOSAL FACILITY. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >93.3C, 200.F
Extinguishing Media: DRY CHEMICAL, FOAM, CARBON DIOXIDE, WATER, ALCOHOL FOAM
Fire Fighting Procedures: WEAR SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING WHEN IN CONFINED AREAS
Unusual Fire/Explosion Hazard: NONE
=======================================================
Control Measures
=======================================================
Respiratory Protection: NOT REQUIRED UNDER NORMAL CONDITIONS
Ventilation: LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
MECHANICAL VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves: CHEMICAL RESISTANT RUBBER, SUCH AS POLYVINYL CHLORIDE-COATED
Eye Protection: SAFETY GLASSES, SPLASH PROOF GOGGLES
Other Protective Equipment: PROTECTIVE GEAR AS REQUIRED TO MINIMIZE SKIN
CONTACT.EMERGENCY EYE WASH AND SHOWER IN WORK AREA
Work Hygienic Practices: FOLLOW CURRENT H.M.I.S. REGULATION
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =100.C, 212.F
Vapor Density: >1
Spec Gravity: 1.00
Evaporation Rate & Reference: (BUAC=1)
Solubility in Water: APPRECIABLE
Appearance and Odor: THICK DARK LIQUID WITH PUNGENT ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: OXIDES OF CARBON
Hazardous Polymerization Indicator: NO
=======================================================
Other Information
=======================================================
Other Information: ITW FLUID PRODUCTS GROUP BASES THE INFORMATION AND
RECOMMENDATION IN THIS DOCUMENT ON DATA BELIEVED TO BE CORRECT. NO WARRANTY
OF ANY KIND HOWEVER, IS MADE AS TO THE INFORMATION IN THIS DOCUMENT. HE
ALTH: 2 FIRE: 1 REACTIVITY: 0 PERSONAL PROTECTION: B
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: KILLCIDE 700 INDUSTRIAL BIOCIDE 1 GAL = 77012
Assigned IND: Y
Company: ITW FLUID PRODUCTS GROUP
Street: 3624 WEST LAKE AVENUE
City: GLENVIEW IL
Zipcode: 60025
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 09/28/2000
Status Code: A
Origination Code: G
Hazard And Precautions: INHALATION: UNLIKELY AT NORMAL ROOM TEMPERATURES. AT
ELEVATED TEMPERATURES EYE, NOSE AND THROAT IRRITATION MAY OCCUR. SKIN/EYE:
SLIGHT IRRITATION. INGESTION: NAUSEA AND VOMITING. ACUTE: SLIGHT IRRITAI ON.
CHRONIC: EFFECTS ARE NOT KNOWN
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|