| MSDS | : | EPOLITE 2152 HARDENER | | CAS | : | 111-40-0
112-24-3
90-72-2
80-05-7 | | NAME | : | diethylenetriamine; (mixed polyethylene)
triethylenetetramine
phenol, 2,4,6-tris (dimethylaminomethyl)-; (modified aliphatic polyamine)
phenol, 4,4,-isopropylidenidi-; (4,4'-isopropylidenediphenol) (bisphenol
|
| |
|
|
HEXCEL CORP -- EPOLITE 2152 HARDENER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSJSW
MSDS NAME: EPOLITE 2152 HARDENER
Responsible Party
Name: HEXCEL CORP
Address: 20701 NORDHOFF ST
Box: 2197
City: CHATSWORTH CA 91311
Info Phone: 818-882-3022
Emergency Phone Number: 800-433-5072;800-367-7527
Preparer's Name: DEIRDRE S. CRUTCHFIELD
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HEXCEL CORP
Address: 11555 DUBLIN BLVD
Box: 2197
City: DUBLIN CA 94568
Phone: 415-828-4200
Name: HEXCEL CORPORATION;CHEMICAL PRODUCTS DIVISION
Address: 20701-NORDHOFF STREET
Box: 2197
City: CHATSWORTH CA 91311-5924
Phone: 818-882-3022
=======================================================
Ingredients
=======================================================
Cas: 111-40-0
RTECS #: IE1225000
Name: DIETHYLENETRIAMINE; (MIXED POLYETHYLENE)
% Wt: 45-65
OSHA PEL: 1 PPM
ACGIH TLV: 1 PPM, S
------------------------------
Cas: 112-24-3
RTECS #: YE6650000
Name: TRIETHYLENETETRAMINE
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 90-72-2
RTECS #: SN3500000
Name: PHENOL, 2,4,6-TRIS (DIMETHYLAMINOMETHYL)-; (MODIFIED ALIPHATIC POLYAMINE)
(POLY (POLYALKYL AMINOALKYL) PHENOL)
% Wt: 2-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 80-05-7
RTECS #: SL6300000
Name: PHENOL, 4,4,-ISOPROPYLIDENIDI-; (4,4'-ISOPROPYLIDENEDIPHENOL) (BISPHENOL
A) (SARA III)
% Wt: 30-45
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: THIS MATL IS MOD TOX IF SWALLOWED, CAUSING BURNS OF THE
MOUTH & THROAT, ABDOM PAIN, NAUS, VOMIT & DIARR. SKIN CNTCT CAUSES
CHEM BURNS & MAY RSLT IN AN ALLERGIC SKIN RXN. WARNING: PRLNGD/RPTD SKIN
EXPO SURE MAY RSLT IN THE ABSORPTION OF HARMFUL AMTS OF MATL. INHAL OF VAPS
IS IRRIT & MAY CAUSE SENSIT (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: OF THE RESP TRACT. A POTENTIAL
ASTHMATIC RESPONSE CAN RSLT. EYE CNTCT MAY CAUSE EXTREME IRRIT &/OR
BURNING. SEVERE IRRIT &/OR SENSITIZATION MAY RESULT FROM OVEREXP TO THIS
PRODUCT.
Medical Cond Aggravated By Exposure: PRE-EXISTING EYE, SKIN, & RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
First Aid: EYE:IMMED FLUSH W/PLENTY OF H2O FOR @ LST 15 MIN. GET MED ATTN.
SKIN:IMMED WASH W/SOAP & PLENTY OF H2O. WASH CONTAM CLTHG BEFORE RE-USE
& DESTROY CONTAM SHOES. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE
ARTF RESP, PREFERABLY MOUTH-TO-MOUTH. IF BRTHG IS DFCLT, GIVE O2. GET MED
ATTN. INGEST:DO NOT INDUCE VOMIT! IF PERSON IS CONSCIOUS, GIVE LRG QTYS OF
WATER TO DILUTE MATL. SEEK MED ATTN IMMED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN W/A SUITABLE DIKING MATL. VENT AREA THORO.
KEEP ALL UNNEC PEOPLE AWAY. SPILLED MATL SHOULD BE ABSORBED IN SAWDUST, SAND
OR OTHER ABSORB. PLACE INTO OPEN-TOPPED CNTNRS & COVER LOOSELY; STORE FO
R @ LST 12 HRS BEFORE SEALING CNTNR.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CONTROLLED INCINERATION OR BURIED LANDFILL DISPOSAL
SHOULD BE IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL ENVIRONMENTAL
REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, WELL VENTILATED AREA IN
TIGHTLY CLOSED CONTAINERS. AVOID MOISTURE CONTAMINATION.
Other Precautions: AVOID BREATHING VAPORS. KEEP AWAY FROM HEAT, SPARKS, AND
OPEN FLAMES. USE ADEQUATE VENTILATION.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 230F,110C
Extinguishing Media: USE DRY CHEMICAL OR CO2 FOR SMALL FIRES AND WATER &
FOAM FOR LARGE ONES.
Fire Fighting Procedures: SINCE VAPORS ARE EXCEEDINGLY IRRIT WHEN INHALED, WEAR
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT (FP N) .
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation: IF HANDLED INDOORS, PROVIDE MECHANICAL EXHAUST VENTILATION.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORK GOGG & (SUPP DATA)
Other Protective Equipment: EMERGENCY EYEWASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health: CNDTNS TO AVOID (STAB): SELF-IGNITE (EXOTHERM).
THIS IS NOT A PROBLEM DURING NORMAL USAGE CONDITIONS. CONSULT THE TECHNICAL
DATA BULLETIN FOR MORE INFORMATION. EYE PROT: FULL LENGTH FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
B.P. Text: >350F,>177C
Vapor Density: 1.01
Appearance and Odor: CLEAR AMBER LIQUID WITH AN AMMONIACAL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID CNTCT W/LRG MASSES OF MIXED RESIN &
HARDENER. IF THE MASS IS OF SUFFICIENT SIZE, THE MATL MAY (SUPP DATA)
Materials To Avoid: AVOID CONTACT WITH MINERAL OR ORGANIC ACIDS, OXIDIZING
AGENTS, ALDEHYES, KETONES AND ORGANIC HALIDES.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, AMMONIA AND
OXIDES OF NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EPOLITE 2152 HARDENER
Company: HEXCEL CORP
Street: 11555 DUBLIN BLVD
PO Box: 2197
City: DUBLIN CA
Zipcode: 94568
Health Emergency Phone: 800-433-5072;800-367-7527
Label Required IND: Y
Date Of Label Review: 12/02/1993
Status Code: C
Label Date: 12/02/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: INGEST: MODERATELY TOXIC, CAUSES
BURNS OF MOUTH & THROAT, ABDOMINAL PAIN, NAUSEA, VOMITING & DIARRHEA.
SKIN: CHEMICAL BURNS, ALLERGIC REACTION. EYE: EXTREME IRRITATION &/OR
BURNING . INHAL: IRRITATION & SENSIT OF THE RESPIRATORY TRACT. CHRONIC:
NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PERMA-SILK G AEROSOL (10-117)
| |
|
AIRCRAFT CARBON DISK BRAKES PARTS,2609281/2606340
| |
|
MIL-L-2104F GR 15W40 LUBE, INT COMBUST ING OIL
| 64742-54-7 |
|
BLACK MAX (TM) BLACK TOUGHENED ADHESIVE
| 7085-85-0
54545-50-5
1333-86-4
85-44-9
123-31-9 |
|
ULTRATHONTM SPRAY INSECT REPELLENT CAT 632 (AEROSOL)
| 67-63-0
75-28-5
134-62-3
70425-89-7 |
|
CLEARWAY 1
| |
|
CLEARWAY 1
| |
|
PREPRITE COATING REMOVER
| |
|
HAND SCREEN AEROSOL, 5016
| |
|
MIL-C-85285B 17142, TY I, 03P012
| |
|
TECHNI-PLUS EN 25.3 HARDENER
| |
|
GT 3000 EPOXY MAINTENANCE GROUT RESIN
| |
|
TECHNI PLUS GT 3000 HARDENER
| |
|
TOXIC SUBSTANCES MIXTURE 2, US-104
| 75-09-2
62-53-3
100-51-6
106-47-8
132-64-9
91-57-6
88-74-4
99-09-2
100-01-6 |
|
PHENOLS MIXTURE, US-107
| 108-95-2
88-06-2
75-09-2
59-50-7
95-57-8
120-83-2
105-67-9
534-52-1
51-28-5
88-75-5
100-02-7
87-86-5 |
|
SEMI-VOLATILES INTERNAL STANDARD MIXTURE, US-108
| 75-09-2
83-32-9
218-01-9
106-46-7
91-20-3
198-55-0
85-01-8 |
|
FLUOROBENZENE SOLUTION, STS-160
| 67-56-1
462-06-6 |
|
MODEL 1640 OIL SUPPLY ROLLER
| 63148-62-9 |
|
DYTRON 24
| |
|
COMP A FLEX BLACK PRIMER, 09BK001
| |
|
CCU 119/A IMPULSE CARTRIDGE 27759-01
| |
|
VINEX RESINS, VX7001
| |
|
VINEX RESINS, VX7002
| |
|
VINEX RESINS, VX7003
| |
|
VINEX RESINS, VX7004
| |
|
VINEX RESINS, VX7005
| |
|
A 3201
| |
|
WHITE WATERBORNE SBC, 00015093
| |
|
36632, CLOUD WHITE 66-32
| 100-42-5
1317-65-3
14807-96-6
14808-60-7 |
|
#496 GEOGARD ONE COMPONENT WHITE
| |
|
NIKLAD 795, 45425
| |
|
FT BLACK DEVELOPER TYPE 8800, 889580
| |
|
PALCO 610
| |
|
WT-125, 0043
| |
|
SS-1 EMULSION
| |
|
EASY-FLO 45
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 35
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 30
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 25HC
| 7440-50-8
7440-22-4
7440-66-6
7440-43-9 |
|
EASY-FLO 25
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
BRAZE 200
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EPOLITE 2183 HARDENER
| 101-77-9
25214-70-4
100-42-5
100-51-6 |
|
EPOLITE 2152 HARDENER
| 111-40-0
112-24-3
90-72-2
80-05-7 |
|
PHOSPHATE STANDARD, 10243
| 7732-18-5
7558-79-4
50-00-0 |
|
ACTIVATOR, 44184
| 76-13-1
64-17-5
99-97-8 |
|
D-10
| |
|
TRIM VHP E200
| |
|
DURO MASTER MEND, TM-61
| 25068-38-6
25154-52-3
111-40-0
25068-38-6 |
|
DURO MASTER MEND, TM-63
| 25068-38-6
25154-52-3
111-40-0
25068-38-6 |
|
|