LILLY INDUSTRIAL COATINGS -- WHITE WATERBORNE SBC, 00015093
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSJLM
MSDS NAME: WHITE WATERBORNE SBC, 00015093
Responsible Party
Name: LILLY INDUSTRIAL COATINGS
Address: 125 BLACKSTONE AVE
City: JAMESTOWN NY 14701
Info Phone: 716-665-6313
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: PATRICIA LYON
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ELANCO PRODUCTS CO, DIV OF ELI LILY/CO
City: INDIANAPOLIS IL 46285
Phone: (317) 261-2000
Name: LILLY INDUSTRIAL COATINGS, INC
Address: 546 W. ABBOTT STREET
City: INDIANAPOLIS IN 46225
Phone: (317) 634-8512
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:MAY CAUSE SKIN, EYE & RESP TRACT IRRIT ALONG
W/DIZZ, NAUS & FATG. CHRONIC:RPTS HAVE ASSOC RPTD/PRLNG OVEREXP TO HIGH
CONC OF SOLVENTS W/DEGENERATIVE BRAIN & NERV SYS DISORDERS. RPTD/PRLNG
SKIN C NTCT CAN CAUSE MOD IRRIT, DEFAT OR DERMAT. REDNESS & ITCHING MAY
OCCUR. SKIN MAY DRY & CRACK. EYE CNTCT(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HEALTH HAZARDS:CAN CAUSE IRRIT, REDNESS
TEARING & BLURRED VISION. INGESTION MAY IRRIT THE DIGESTIVE TRACT &
CAUSE NAUS, VOMIT & DIARR.
Medical Cond Aggravated By Exposure: PRE-EXISTING EYE, SKIN & RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
First Aid: EYES:FLUSH W/WATER FOR AT LEAST 15 MINS LIFTING UPPER & LOWER
LIDS OCCASNLY. GET MED ATTN. SKIN:REMOVE CONTAMD CLTHG. WASH EXPOSED AREAS
WELL W/SOAP & WATER. IF IRRIT PERSISTS, GET MED ATTN. INHAL:REM OVE TO
FRESH AIR & GET MED ATTN. IF BREATHING STOPS, ADMIN ARTIF RESP. CONTACT
MD IMMED. INGEST:CALL MD IMMED. NOTE: DO NOT INDUCE VOMIT W/OUT MD'S ADVICE
AS MATL COULD ASPIRATE INTO LUNGS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT. DIKE AREA
OF SPILL TO PREVENT SPREADING. PREVENT RUN-OFF TO SEWERS & OTHER WATER
SOURCES.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions: SINCE EMPTY CONTRS RETAIN PROD RESIDUE (VAP, LIQ, &/OR
SOLID), ALL PREC WARNINGS NOTED ON LABEL & ON THIS MSDS MUST BE OBSERVED.
DO NOT USE CUTTING/WELDING TORCH ON EMPTY CONTR. CHECK ALL CNTRS FOR LE AKS.
FOR INDUSTRIAL USE ONLY. (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: CC
Flash Point Text: >200F,>93C
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: CLEAR AREA OF UNPROTECTED PERSONNEL. USE NIOSH/MSHA
APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT (FP N). USE WATER SPRAY TO COOL
FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard: KEEP CONTRS TIGHTLY CLOSED WHEN NOT IN USE.
DURING EMER CONDTNS, OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY CAUSE HLTH
HAZ. SYMPS MAY NOT BE IMMED APPARENT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: APPROVED NIOSH/MSHA VAPOR-TYPE RESPIRATOR REQUIRED IN
ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
Ventilation: AS NECESSARY TO MAINTAIN LEVELS BELOW OCCUP EXPOSURE LIMITS OF ALL
OF THE COMPONENTS.
Protective Gloves: NATL RUBBER/NEOPRENE REQ FOR RPTD CONT.
Eye Protection: ANSI APRV CHEM WORK GOGG/FULL LGTH FCSHL
Other Protective Equipment: EYE WASH & SFTY SHOWER. AVOID CONT BY WEARING
IMPERVIOUS PROT CLTHG. REMOVE CONTAMD CLTHG IMMED & WASH BEFORE WEARING.
Work Hygienic Practices: WASH HANDS THOROUGHLY BEFORE EATING, DRINKING, SMOKING
OR ANY OTHER BODY CONTACT.
Supplemental Safety and Health: OTHER PREC: NOT INTENDED FOR SALE OR USE BY THE
GENERAL PUBLIC.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >200F,>93C
Vapor Density: HVR/AIR
Spec Gravity: 1.1 (H*2O=1)
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: SOLUBLE
Appearance and Odor: WHITE VISCOUS LIQUID. MILD LATEX ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT & IGNITION SOURCES.
Materials To Avoid: MATERIALS THAT REACT VIOLENTLY OR EXPLOSIVELY W/WATER.
Hazardous Decomposition Products: MAY CONTAIN CARBON DIOXIDE AND/OR CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: WHITE WATERBORNE SBC, 00015093
Assigned IND: Y
Company: LILLY INDUSTRIAL COATINGS, INC
Street: 546 W. ABBOTT STREET
City: INDIANAPOLIS IN
Zipcode: 46225
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/14/1993
Status Code: C
Label Date: 04/14/1993
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. AVOID MATLS THAT REACT W/WATER. ACUTE:MAY
CAUSE SKIN, EYE & RESP TRACT IRRIT ALONG W/DIZZ, NAUS & FATG.
RPTD/PRLNG SKIN CNTCT CAN CAUSE MOD IRRIT, DEFAT OR DERMAT. REDNESS &
ITCHING MAY O CCUR. SKIN MAY DRY & CRACK. EYE CNTCT CAN CAUSE IRRIT,
REDNESS TEARING & BLURRED VISION. INGESTION MAY IRRIT THE DIGESTIVE TRACT
& CAUSE NAUS, VOMIT & DIARR. CHRONIC: RPTS HAVE ASSOC RPTD/PRLNG
OVEREX P TO HIGH CONC OF SOLVENTS W/DEGENERATIVE BRAIN & NERV SYS
DISORDERS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PERMA-SILK G AEROSOL (10-117)
| |
|
AIRCRAFT CARBON DISK BRAKES PARTS,2609281/2606340
| |
|
MIL-L-2104F GR 15W40 LUBE, INT COMBUST ING OIL
| 64742-54-7 |
|
BLACK MAX (TM) BLACK TOUGHENED ADHESIVE
| 7085-85-0
54545-50-5
1333-86-4
85-44-9
123-31-9 |
|
ULTRATHONTM SPRAY INSECT REPELLENT CAT 632 (AEROSOL)
| 67-63-0
75-28-5
134-62-3
70425-89-7 |
|
CLEARWAY 1
| |
|
CLEARWAY 1
| |
|
PREPRITE COATING REMOVER
| |
|
HAND SCREEN AEROSOL, 5016
| |
|
MIL-C-85285B 17142, TY I, 03P012
| |
|
TECHNI-PLUS EN 25.3 HARDENER
| |
|
GT 3000 EPOXY MAINTENANCE GROUT RESIN
| |
|
TECHNI PLUS GT 3000 HARDENER
| |
|
TOXIC SUBSTANCES MIXTURE 2, US-104
| 75-09-2
62-53-3
100-51-6
106-47-8
132-64-9
91-57-6
88-74-4
99-09-2
100-01-6 |
|
PHENOLS MIXTURE, US-107
| 108-95-2
88-06-2
75-09-2
59-50-7
95-57-8
120-83-2
105-67-9
534-52-1
51-28-5
88-75-5
100-02-7
87-86-5 |
|
SEMI-VOLATILES INTERNAL STANDARD MIXTURE, US-108
| 75-09-2
83-32-9
218-01-9
106-46-7
91-20-3
198-55-0
85-01-8 |
|
FLUOROBENZENE SOLUTION, STS-160
| 67-56-1
462-06-6 |
|
MODEL 1640 OIL SUPPLY ROLLER
| 63148-62-9 |
|
DYTRON 24
| |
|
COMP A FLEX BLACK PRIMER, 09BK001
| |
|
CCU 119/A IMPULSE CARTRIDGE 27759-01
| |
|
VINEX RESINS, VX7001
| |
|
VINEX RESINS, VX7002
| |
|
VINEX RESINS, VX7003
| |
|
VINEX RESINS, VX7004
| |
|
VINEX RESINS, VX7005
| |
|
A 3201
| |
|
WHITE WATERBORNE SBC, 00015093
| |
|
36632, CLOUD WHITE 66-32
| 100-42-5
1317-65-3
14807-96-6
14808-60-7 |
|
#496 GEOGARD ONE COMPONENT WHITE
| |
|
NIKLAD 795, 45425
| |
|
FT BLACK DEVELOPER TYPE 8800, 889580
| |
|
PALCO 610
| |
|
WT-125, 0043
| |
|
SS-1 EMULSION
| |
|
EASY-FLO 45
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 35
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 30
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO 25HC
| 7440-50-8
7440-22-4
7440-66-6
7440-43-9 |
|
EASY-FLO 25
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EASY-FLO
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
BRAZE 200
| 7440-43-9
7440-50-8
7440-22-4
7440-66-6 |
|
EPOLITE 2183 HARDENER
| 101-77-9
25214-70-4
100-42-5
100-51-6 |
|
EPOLITE 2152 HARDENER
| 111-40-0
112-24-3
90-72-2
80-05-7 |
|
PHOSPHATE STANDARD, 10243
| 7732-18-5
7558-79-4
50-00-0 |
|
ACTIVATOR, 44184
| 76-13-1
64-17-5
99-97-8 |
|
D-10
| |
|
TRIM VHP E200
| |
|
DURO MASTER MEND, TM-61
| 25068-38-6
25154-52-3
111-40-0
25068-38-6 |
|
DURO MASTER MEND, TM-63
| 25068-38-6
25154-52-3
111-40-0
25068-38-6 |
|
|