3M GENERAL OFFICE -- SCOTCH-WELD EC-3578 B/A PART A STRUCTURAL (SU
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWBTR
MSDS NAME: SCOTCH-WELD EC-3578 B/A PART A STRUCTURAL (SUPDAT)
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICE
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 68082-29-1
Name: POLYAMIDE; (POLYAMIDE RESIN)
% Wt: 35-50
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 112-24-3
RTECS #: YE6650000
Name: TRIETHYLENETETRAMINE; (TRIETHYLENE TETRAMINE)
% Wt: 10-20
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 140-31-8
RTECS #: TK8050000
Name: PIPERAZINE, 1-(2-AMINOETHYL)-; (AMINOETHYL PIPERAZINE)
% Wt: 5-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 25154-52-3
RTECS #: SM5600000
Name: PHENOL, NONYL-; (NONYLPHENOL)
% Wt: 1-10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 80-05-7
RTECS #: SL6300000
Name: PHENOL, 4,4'-ISOPROPYLIDENEDI-; (BISPHENOL A) (SARA III)
% Wt: 1-10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: SUPDAT:& HNDLG HAS NOT BEEN RPTD TO CAUSE SIGNIFICANT ADVERSE HLTH
EFTS. HOWEVER, UNDER NORMAL PROCESSING CNDTNS,
-----------------------------
Name: ING 6:E.G., GRINDING/HEATING, THIS PROD MAY RELS FUMES & VAPS OF
VARIABLE COMPOSITION BASED ON SPECIFIC PROCESS
-----------------------------
Name: ING 7:CNDTNS. THESE PROCESS RELS MAY PRDCE IRRIT/ANY OF HLTH EFTS LISTED
WHEN EMISSIONS ARE PRESENT AT ELEVATED
-----------------------------
Name: ING 8:CONCENTRATIONS. USE W/APPROPRIATE LOCAL EXHAUST VENTILATION.
-----------------------------
Name: SPILL PROC:APPROVED CONTAINER & SEAL.
-----------------------------
Name: VENT:TO SUITABLE EMISSION CONTROL DEVICE. USE IN WELL-VENTILATED AREA. IF
EXHST VENT IS NOT ADEQ, USE APPROP
-----------------------------
Name: ING 11:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION.
-----------------------------
Name: PROT GLOVES:ALCOHOL GLOVES.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONT:SEV IRRIT:SIGNS/SYMPS CAN INCL REDNESS, SWELL,
PAIN, TEARING, CLOUDY APPEAR OF CORNEA, IMPAIRED VISION & POSS
PERMANENTLY IMPAIRED VISION. VAPS FROM HEATED MATL MAY CAUSE IRRIT. DUST
CREATED BY CUTTING, GRINDING, SANDING/ MACHINING MAY CAUSE IRRIT. SKIN CONT:
ALLERGIC RXN:SIGNS/SYMPS CAN INCL (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:REDNESS, SWELL, BLISTERING &
ITCH. MOD IRRIT:SIGNS/SYMPS CAN INCL REDNESS, SWELL, ITCH & DRYNESS. MAY
BE ABSORBED THRU SKIN. INHAL:IRRIT (UPPER RESP):SIGNS/SYMPS CAN INCL SORENESS
OF NOSE & T HROAT, COUGHING & SNEEZING. VAPS OF HEATED MATL MAY CAUSE
RESP SYS IRRIT. DUST FROM CUTTING, GRINDING, SANDING/ (SUPDAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE:IMMED FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS. GET IMMED MED
ATTN. SKIN:IMMED WASH W/SOAP & LG AMTS OF WATER. REMOVE CONTAM CLTHG. IF
SIGNS/SYMPS OCCUR, CALL MD. WASH CONTAM CLTHG BEFORE REUSE & DISP OF
CONTAM SHOES. INHAL:REMOVE PERSON TO FRESH AIR. IF SIGNS/SYMPS CONTINUE, CALL
MD. INGEST:DO NOT INDUCE VOMIT. DRINK TWO GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFO
REGARDING PHYSICAL & HLTH HAZS, RESP PROT, VENT & PERSONAL PROT
EQUIP. CALL (612)733-1100/(612)733-6100 FOR 24-HR SPILL ASSISTANCE. COVER
W/ABSORB MATL. C OLLECT SPILLED MATL. PLACE IN U.S. DOT-
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCINERATE
UNCURED WASTE IN INDUS/COMMERICAL INCINERATOR. DISPOSE OF COMPLETELY CURED
(OR POLYMERIZED) MATL IN A SANITARY LANDFILL. SINCE REGS VARY, CONSULT A
PPLIC FED, STATE & LOC REGS/AUTHS BEFORE DISP.
Handling And Storage Precautions: AVOID EYE/SKIN CONTACT. AVOID INHAL OF VAPORS
CREATED DURING CURE CYCLE. AVOID INHAL OF DUST CREATED BY CUTTING,
SANDING/GRINDING. DO NOT INGEST.
Other Precautions: DO NOT EAT, DRINK/SMOKE WHEN USING THIS PRODUCT. STORE AWAY
FROM HEAT. KEEP OUT OF REACH OF CHILDREN. KEEP CNTNR TIGHTLY CLSD. DO NOT
CURE UP MASS OF COMBINED MATL LARGER THAN 50 GRAMS TO PREVENT POSS IBILITY OF
EXOTHERM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >230F,>110C
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: SELECT ONE OF THE FOLLOWING NIOSH/MSHA APPROVED
RESPIRATORS BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & I/A/W OSHA
REGULATIONS: HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHST FOR GRINDING, CUTTING/SANDING CURED MATL.
CURING OVENS MUST BE EXHAUSTED TO OUTDOORS/
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL
Eye Protection: VENTED GOGGLES.
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH EXPOSED AREAS THOROUGHLY W/SOAP & WATER.
Supplemental Safety and Health: MFR'S TRADE NAME/PART NO:ADHESIVE (1PB). HAZ
DECOMP PROD:GASES/PARTICULATES. EFTS OF OVEREXP:MACHINING MAY CAUSE IRRIT OF
RESP SYS. INGEST:MAY CAUSE:IRRIT OF GI TISS:SIGNS/SYMPS CAN INCL PAIN, VOMIT,
ABDOM TENDERNESS, NAUS, BLOOD IN VOMITUS & BLOOD IN FECES. OTHER HLTH
HAZ INFO:EXPOS TO THIS MATL IN NORMAL STOR
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 0.97 (H*2O=1)
Solubility in Water: NIL
Appearance and Odor: AMBER LIQUID; PUNGENT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE & CARBON DIOXIDE, OXIDES OF
NITROGEN, ALDEHYDES, KETONES, HYDROCARBONS, AMINE CMPDS, TOX VAPS, (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD EC-3578 B/A PART A STRUCTURAL (SUPDAT)
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 12/05/1994
Status Code: C
Label Date: 12/05/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:EYE CONTACT:SEVERE IRRITATION,
REDNESS, SWELLING, PAIN, TEARING, CLOUDY APPEARANCE OF CORNEA, IMPAIRED
VISION & POSSIBLE PERMANENTLY IMPAIRED VISION. VAPORS FROM HEATED
MATERIAL MAY CAUSE IRRITATION. DUST CREATED BY CUTTING, GRINDING, SANDING OR
MACHINING MAY CAUSE IRRITATION. SKIN CONTACT:MODERATE IRRITATION, REDNESS,
SWELLING, BLISTERING & ITCHING. INHAL:IRRITATION FROM DUST O R FUMES.
INGEST:IRRITATION. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SOLVENT CEMENT, 14-032
| 142-82-5
108-87-2 |
|
SOLVENT CEMENT, 14-132
| 142-82-5
108-87-2 |
|
RTV BLUE SILICONE GASKET MAKER-LOW VOLATILE, 49203
| |
|
RTV BLUE SILICONE GASKET MAKER-LOW VOLATILE, 49233
| |
|
RTV BLUE SILICONE GASKET MAKER-LOW VOLATILE, 49243
| |
|
RTV BLUE SILICONE GASKET MAKER-LOW VOLATILE, 49293
| |
|
CD 802 MONOMER
| |
|
VESTANAT IPDI, 1365200
| 4098-71-9 |
|
DUCT SEAL, 31-601, 31-605
| |
|
CHEMCLAD XC ACTIVATOR
| |
|
UNITED 33
| |
|
UNITED 389, OLD SOFTY
| 64742-88-7
112-80-1
1317-65-3 |
|
UNITED 213, MACHINE DISHWASHER
| 6834-92-0
497-19-8 |
|
UNITED 55, IMPACT GRANULES
| |
|
UNITED 390, SEA BREEZE
| |
|
EP-N CARTRIDGE BLACK R64-2002
| |
|
EP-NII CARTRIDGE BLACK R64-2014
| |
|
PERMANENT THREADLOCKER 262, 26221
| 25852-47-5
39382-25-7
80-15-9
9002-88-4
81-07-2
613-48-9
112945-52-5 |
|
PERMANENT THREADLOCKER 262, 26231
| 25852-47-5
39382-25-7
80-15-9
9002-88-4
81-07-2
613-48-9
112945-52-5 |
|
PERMANENT THREADLOCKER 262, 26241
| 25852-47-5
39382-25-7
80-15-9
9002-88-4
81-07-2
613-48-9
112945-52-5 |
|
40-013, DL PERMATEX GOLD LABEL ANTISEPTIC HAND CLEANER
| 64475-85-0
7732-18-5
68132-47-8
57-55-6
88-04-0 |
|
40-406, DL PERMATEX GOLD LABEL ANTISEPTIC HAND CLEANER
| 64475-85-0
7732-18-5
68132-47-8
57-55-6
88-04-0 |
|
40-556, DL PERMATEX GOLD LABEL ANTISEPTIC HAND CLEANER
| 64475-85-0
7732-18-5
68132-47-8
57-55-6
88-04-0 |
|
40-506, DL PERMATEX GOLD LABEL ANTISEPTIC HAND CLEANER
| 64475-85-0
7732-18-5
68132-47-8
57-55-6
88-04-0 |
|
40-704, DL PERMATEX GOLD LABEL ANTISEPTIC HAND CLEANER
| 64475-85-0
7732-18-5
68132-47-8
57-55-6
88-04-0 |
|
USCALRITE HYSPEED PINK
| |
|
OKIDATA 400/800 REPLACEMENT TONER
| |
|
755, LIQUID CLEANING COMPOUND
| |
|
CADMIUM METAL
| 7440-43-9 |
|
RE-ENTRY KNI SOLVENT 2000
| |
|
JOINT COMPOUND:ALL PURPOSE RED DOT B
| 1317-65-3
111-42-2
12001-26-2
93763-70-3
14808-60-7 |
|
K-15 13 AM FLOCCULANT
| |
|
182-M
| |
|
MXB 7620/7781 38", 701490
| |
|
HANDY FLO 700 BRAZING PASTE
| |
|
HI-TEMP 2409
| 7782-42-5 |
|
SCOTCH-WELD EC-3578 B/A PART A STRUCTURAL (SUPDAT)
| 68082-29-1
112-24-3
140-31-8
25154-52-3
80-05-7 |
|
SCOTCH-WELD EC-3578 B/A PART B STRUCTURAL (SUPDAT)
| |
|
VALVOLINE PREM UNIV TRACT HYDRAULIC FLUID
| |
|
PRINT CARTRIDGE FOR HP DESIGNJET 650C, 51640A
| |
|
PRINT CARTRIDGE FOR HP DESIGNJET 650C, 51640C
| |
|
PRINT CARTRIDGE FOR HP DESIGNJET 650C, 51640M
| |
|
PRINT CARTRIDGE FOR HP DESIGNJET 650C, 51640Y
| |
|
IPI-ULTRAMETAL MT-400, BASE
| |
|
IPI-ULTRAMETAL MT-400, SOLIDIFIER
| |
|
NITRO-SATAN SPOT & GLAZING PUTTY,MFG CODE:9000,9001,9002.
| |
|
FORMULA 700
| |
|
NATURAL GRAPHITE, LS-10, L-300, L-600, LT-30, DG-11
| |
|
MIL-L-63460D, AOSYN 900
| |
|
SCOTCH-GRIP (TM) 1870 INDUSTRIAL ADHESIVE
| 110-54-3
9003-55-8
68240-01-7
9010-69-9
65997-13-9
64742-16-1
9003-35-4
64-17-5
67-56-1 |
|
|