STANDARD COATING CORP -- NITRO-SATAN SPOT & GLAZING PUTTY,MFG CODE:900
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-262-7844
MSDS Num: BWCBR
MSDS NAME: NITRO-SATAN SPOT & GLAZING PUTTY,MFG CODE:9000,9001,9002.
Responsible Party
Name: STANDARD COATING CORP
Address: 461 BROAD AVE
City: RIDGEFIELD NJ 07657-2329
Info Phone: 201-945-5058
Emergency Phone Number: 201-945-5058
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: STANDARD COATING CORP
Address: 461 BROAD AVE
City: RIDGEFIELD NJ 07657-2329
Phone: 800-424-9300 CHEMTREC
=======================================================
Item Description Information
=======================================================
Specification Number: UNKNOWN
Type of Container: UNKNOWN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: UNKNOWN
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:SEVERE IRRIT TO EYES, RESP SYS, DERMATOLOGICAL
EFFECTS. INGESTIN WILL CAUSE SEVERE IRRIT TO RESP AND GASTRIC TRACTS.
CHRONIC:LIVER, KIDNEY, LUNG, BLOOD, AND CENTRAL NERVOUS SYSTEM EFFETCTS.
Signs And Symptions Of Overexposure: DIZZINESS, VOMITING, NOSE BLEEDS,
HEADACHE, DROWSINESS, NARCOSIS, NAUSEA, STUPOR, MILD DEPRESSION OR LOSS OF
CONSCIOUSNESS.
Medical Cond Aggravated By Exposure: EMPHYSEMA, ASTHAM, DERMATITIS.
First Aid: INHAL:REMOVE TO FRESH AIR. NOT BREATH GIVE ARTIFICIAL RESP. DIFF
BREATH GIVE OXYGEN. EYE:FLUSH W/PLENTY OF WATER FOR @LEAST 15MINS.SEE
PHYSICIAN. SKIN:WASH AREAS W/WATER. REMOVE CONTAMIN CLOTH. INGEST :DO NOT
INDUCE VOMITING. CALL PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: DIKE/CONTAIN SPILL W/INERT MATL(SAND/EARTH).TRANSFER
LIQ TO CNTNRS FOR RECOVERY/DISPOSAL.SOLID DIKING MATL TO SEPARATE CNTNRS FOR
DISPOSAL.FLUSH CLEANED AREA W/WATER TO CONTAMIN(CHEM)SEWER.KEEP SPILLS
/CLEANING RUNOFFS OUT OF MUNICIPAL SEWER/OPN WATER
Neutralizing Agent: NONE SPECIFIED BY MFG.
Waste Disposal Methods: INCINERATE LIQUID IN APPROVED EQPMT. LANDIFLL OR
INCINERATE CONTAMINATED DIKING MATL ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Handling And Storage Precautions: WARNING FLAMM.HARMFUL IF INHAL.KEEP AWAY FROM
HEAT/SPARKS/OPEN FLAME.USE ONLY W/ADEQUATE VENTI.AVOID PROL/BREATH OF VAP OR
CONTACT W/SKIN.
Other Precautions: LIQ MAY CAUSE EYE/SKIN IRRIT.KEEP CNTNR CLSD.OBSERVE ALL
LABEL INSTRUCT.FOR INDUST USE ONLY.KEEP OUT OF REACH OF CHILDREN.DO NOT USE
TIL MFG'S SAFETY PRECAUTIONS HAVE BEEN READ/UNDERSTOOD.POCKETS OF H EAVY
&/OR FLAMM VAP MUST NOT BE FORMED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 70.0F,21.1C
Lower Limits: 1.0
Extinguishing Media: DRY CHEMICAL, CO2, UNIVERSAL FOAM OR WATER SPRAY (FOG)
Fire Fighting Procedures: USE MSHA/NIOSH APPROVED SCBA AND FULL PROTECTIVE GEAR
WHEN FIGHTING FIRE IN CONFINED SPACES.
Unusual Fire/Explosion Hazard: WHEN HEATED ABOVE FLASH POINT EMITS FLAMM VAPORS
WHICH WHEN MIXED W/AIR CAN BURN OR BE EXPLOSIVE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: OPEN AREAS:USE APPROVED MECHANICAL FILTER RESP TO
REMOVE SOLID AIRBORNE PARTICLE.RESTRICTED VENTI AREAS:NIOSH/MSHA APPROVED
CHEM/MECH FILT RESP FOR PARTICLE/VAP OR +PRESS AIR HOODS IF LOC MECHA EXHAU
NOT SUFFICIENT TO KEEP TLV <LEVELS.
Ventilation: USE LOC/CENTRAL MECH ENGIN CNTRLS TO KEEP CONCEN LEVELS
<APPLICATION OSHA PEL/ACGIII TLV LIMIT.REMOVE DECOMP PROD.
Protective Gloves: IMPERVIOUS TYPE REQUIRED FOR REP/PROL
Eye Protection: SAFETY GOGGLES OR FACESHILED ANSI Z87.1.
Other Protective Equipment: EYE BATH, SAFETY SHOWER, APRONS.
Work Hygienic Practices: THOROUGHLY LAUNDER CLOTHING BEFORE REUSE.DO NOT TAKE
CLOTHING HOME TO BE LAUNDERED.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F2
B.P. Text: 172F,78C
Vapor Density: >AIR
Evaporation Rate & Reference: SLOWER THAN ETHER
Percent Volatiles by Volume: 25-30
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HIGH HEAT, SPARKS AND OPEN FLAMES.
Materials To Avoid: STRONG ACIDS, ALKALIS, OXIDIZING AGENTS.
Hazardous Decomposition Products: OXIDES OF NITROGEN, CARBON MONOXIDE AND
CARBON DIOXIDE
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 62712
MSDS NAME: NITRO-SATAN SPOT & GLAZING PUTTY,MFG CODE:9000,9001,9002.
MSDS Prepared Date: 10/06/1994
Review Date: 12/20/1994
Tech Entry NOS Shipping Nm: PAINT OR PAINT RELATED MATERIALS, FLAMMABLE.
Net Unit Weight: UNKNOWN
Multiple KIT Number: 0
Review IND: Y
Type Of Container: UNKNOWN
Additional Data: PER MSDS:CLASSIFICATION:FLAMM LIQ, DOT CLASS:PAINT, 3, UN1263,
PGII.
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: LFD
DOT Proper Shipping Name: PAINT
DOT PSN Modifier: INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER, AND LIQUID LACQUER BASE
Hazard Class: 3
UN ID Num: UN1263
DOT Packaging Group: II
Label: FLAMMABLE LIQUID
Special Provision: B52,T7,T30
Packaging Exception: 150
Non Bulk Pack: 173
Bulk Pack: 242
Max Qty Pass: 5 L
Max Qty Cargo: 60 L
Vessel Stow Req: B
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: LCP
IMO Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
IMO PSN Modifier: (INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING PAINT
THINNING OR REDUCING COMPOUND) o
IMDG Page Number: 3268
UN Number: 1263
UN Hazard Class: 3.2
IMO Packaging Group: I/II *
Subsidiary Risk Label: -
EMS Number: 3-05
MED First Aid Guide NUM: 310
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: SXI
IATA UN ID Num: 1263
IATA Proper Shipping Name: PAINT
IATA PSN Modifier: (INCLUDING
PAINT,LACQUER,ENAMEL,STAIN,SHELLAC,VARNISH,POLISH,LIQUID FILLER AND LIQUID
LACQUER BASE)
IATA UN Class: 3
IATA Label: FLAMMABLE LIQUID
UN Packing Group: II
Packing Note Passenger: 305
Max Quant Pass: 5L
Max Quant Cargo: 60L
Packaging Note Cargo: 307
Exceptions: A7,A72
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: SXI
AFI Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
AFI PSN Modifier: (INCLUDING PAINT,LACQUER,ENAMEL,STAIN,SHELLAC
SOLUTIONS,VARNISH,POLISH,LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING
PAINT THINNING OR REDUCING COMPOUNDS)
AFI Hazard Class: 3
AFI UN ID NUM: UN1263
AFI Packing Group: II
Special Provisions: P5
Back Pack Reference: A7.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: NITRO-SATAN SPOT & GLAZING PUTTY,MFG CODE:9000,9001,9002.
Company: STANDARD COATING CORP
Street: 461 BROAD AVE
City: RIDGEFIELD NJ
Zipcode: 07657-2329
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 12/20/1994
Status Code: C
Label Date: 12/20/1994
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: ACUTE:SEVERE IRRIT TO EYES, RESP SYS, DERMATOLOGICAL
EFFECTS. INGESTIN WILL CAUSE SEVERE IRRIT TO RESP AND GASTRIC TRACTS.
CHRONIC:LIVER, KIDNEY, LUNG, BLOOD, AND CENTRAL NERVOUS SYSTEM EFFETCTS. WARN
ING FLAMM.HARMFUL IF INHAL.KEEP AWAY FROM HEAT/SPARKS/OPEN FLAME.USE ONLY
W/ADEQUATE VENTI.AVOID PROL/BREATH OF VAP OR CONTACT W/SKIN. TARGET
ORGANS:EYE/RESP SYS/SKIN/GI TRACT/LIVER/KIDNEY/LUNG/BLOOD/
CNS.1STAID:INHAL:REMOVE TO FRESH AIR. NOT BREATH GIVE ARTIFICIAL RESP. DIFF
BREATH GIVE OXYGEN. EYE:FLUSH W/PLENTY OF WATER FOR @LEAST 15MINS.SEE
PHYSICIAN. SKIN:WASH AREAS W/WATER. REMOVE CONTAMIN CL OTH. INGEST:DO NOT
INDUCE VOMITING. CALL PHYSICIAN
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|