HOUGHTON INTERNATIONAL INC -- HI-TEMP 2409
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWBTG
MSDS NAME: HI-TEMP 2409
Responsible Party
Name: HOUGHTON INTERNATIONAL INC
Box: 930
City: VALLEY FORGE PA 19482
Info Phone: 215-666-4105
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: ROBERT E. WILLIAMS
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HOUGHTON INTERNATIONAL INC
Address: MADISON AND VAN BUREN AVES
Box: 930
City: VALLEY FORGE PA 19482-0930
Phone: 610-666-4105
Name: HOUGHTON INTERNATIONAL INC
Address: UNKNOWN
Box: 930
City: VALLEY FORGE PA 19482
Phone: 215-666-4105
=======================================================
Ingredients
=======================================================
Cas: 7782-42-5
RTECS #: MD9659600
Name: GRAPHITE (NATURAL)
% Wt: 10-30
OSHA PEL: 15 MPPCF
ACGIH TLV: 2 MG/M3 RDUST
------------------------------
Name: POLYALKYLENE GLYCOL
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:INHAL:EXCESSIVE INHALATION OF VAPORS OR MISTS MAY
CAUSE LUNG DAMAGE. AVOID BREATHING MISTS. DUST MAY IRRITATE UPPER RESPIRATORY
TRACT. SKIN:NONE KNOWN. EYE:MILD IRRITANT. INGEST:NO SERIOUS EFFEC TS KNOWN.
CHRONIC:UNKNOWN FOR THIS PRODUCT.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: PERSONS W/CHRONIC RESPIRATORY DISEASE MAY
SHOW INCREASED SYMPTOMS.
First Aid: INHAL:REMOVE TO SOURCE OF FRESH AIR. SKIN:WASH W/SOAP & WATER.
EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES, CONSULT MD. INGEST:INDUCE
VOMITING; CONSULT MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: APPLY DRY OIL ABSORBENT TYPE MATERIAL & SWEEP UP.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). FOLLOW PERTINENT REGS FOR DISP OF WASTE OIL. MAY BE
INCINERATED UNDER CONTROLLED CNDTNS. NOT CONSIDERED A POLLUTANT IF EFTIVE
WASTE DI SP METHODS ARE UTILIZED.
Handling And Storage Precautions: AVOID CONTACT W/STRONG OXIDIZERS.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: 440F,227C
Extinguishing Media: WATER, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). REQUIRED IF TLV IS EXCEEDED OR IF MISTING CONDITIONS ARE
EXCESSIVE.
Ventilation: EXHAUST TYPE IF MISTING; MECHANICAL TYPE SATISFACTORY OTHERWISE.
Protective Gloves: RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: NOT REQUIRED.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >390F,>199C
Vapor Pres: <0.1
Vapor Density: >AIR
Spec Gravity: 1
Solubility in Water: MODERATE
Appearance and Odor: BLACK PASTE; BLAND ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZERS.
Hazardous Decomposition Products: THERMAL: OXIDES OF CARBON.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HI-TEMP 2409
Assigned IND: Y
Company: HOUGHTON INTERNATIONAL INC
Street: UNKNOWN
PO Box: 930
City: VALLEY FORGE PA
Zipcode: 19482
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 11/30/1994
Status Code: C
Label Date: 11/30/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INHAL:EXCESSIVE INHALATION OF VAPORS OR MISTS MAY
CAUSE LUNG DAMAGE. AVOID BREATHING MISTS. DUST MAY IRRITATE UPPER RESPIRATORY
TRACT. SKIN:NONE KNOWN. EYE:MILD IRRITANT. INGEST:NO SERIOUS EFFEC TS KNOWN.
CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.