INTEGRATED POLYMER INDUSTRIES -- IPI-ULTRAMETAL MT-400, BASE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWBXG
MSDS NAME: IPI-ULTRAMETAL MT-400, BASE
Kit Part: Y
Responsible Party
Name: INTEGRATED POLYMER INDUSTRIES INC
Address: 29734 AVENIDA DE LAS BANDERAS
City: RANCHO SANTA MARGARITA CA 92688-2606
Info Phone: 714-858-4047
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: ERGUN KIRLIKOVALI
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTEGRATED POLYMER INDUSTRIES
Address: 29734 AVIENDA DE LAS BANDERAS
City: RANCHO SANTA MARGARITA CA 92688-2606
Phone: 714-858-4047;714-434-0800
Name: IPI
Address: TRIUMPH INDUSTRIAL PARK,505 BLUE BALL R
Box: 70
City: ELKTON MD 21921
Phone: 301-392-4800
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50: (ORAL,RAT) 11.4 G/KG
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: SKIN/EYE: MILD IRRITATION. CHRONIC: APPROXIMATELY
1% OF WORKERS ARE POTENTIALLY SKIN SENSITIZABLE.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN: WASH W/SOAP & WARM WATER. GET MED ATTN IF IRRIT DEVELOPS.
EYE: FLUSH W/WATER FOR AT LEAST 15 MINS; GET MED ATTN. INHAL: REMOVE TO FRESH
AIR; ADMIN OXYGEN IF BRTHG IS DFCLT; GET MED ATTN. INGEST: DO NOT INDUCE
VOMITING; ADMIN 2 GLASSES OF WATER; GET MED ATTN. NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PVNT SKIN & EYE CONT; ABSORB W/SAND/INERT MATL;
SWEEP/SCOOP UP & REMOVE; ALTERNATIVELY, REACT BASE W/SOLIDIFIER/VICE
VERSA INTO HARMLESS SOLID; AVOID ALL CONT; REMOVE SOURCE OF HEAT,
FLAME,IMPACT/ELEC ; WEAR NIOSH/MSHA APPRVD RESP & PROT (SUPP DATA)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: REMOVE TO A WASTE DISPOSAL FACILITY OPG IN COMPLIANCE
WITH FEDERAL, STATE & LOCAL REGULATIONS; KEEP SPILLS & CLEANING
RUNOFFS OUT OF MUNICIPAL SEWERS & OPEN BODIES OF WATER; WASH SPILL AREA
W/INDUSTRI AL CLEANING AGENTS; IF SOLV USED(SUPP DATA)
Handling And Storage Precautions: SHELF LIFE: INDEFINITE IN ORIGINAL UNOPENED
CNTNRS AT ROOM TEMP; SOLIDIFER MAY DEVELOP A DARKER SKIN & EVEN SPECS ON
SKIN OVER TIME, BUT IS OK TO USE.
Other Precautions: STORE IN COOL, DRY PLACE; STORE W/ADEQUATE VENT; SEGREGATE
FROM FOODSTUFFS; KEEP AWAY FROM CHILDREN. IF CURED MATL IS SANDED/MACHINED,
USE PROPER PRECS & WEAR ADEQ PROT EQUIP TO PVNT OVEREXP TO NUISAN CE
PARTICULATES; DO NOT CONSUME(SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >400F,>204C
Extinguishing Media: FOAM, CO*2, DRY CHEMICALS, WATER FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT(FP N). FIGHT FIRE FROM PROTECTED LOCATION & PVNT SPLASHING ON
PERS. USE WATER SPRAY TO COOL CNTNRS.
Unusual Fire/Explosion Hazard: IF LARGE AMOUNT IS INVOLVED, EVACUATE AREA &
FIGHT FIRE FROM SAFE DISTANCE. TOXIC FUMES WILL EVOLVE WHEN IN FIRE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED AT NORMAL HANDLING TEMPERATURES. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN (FP N).
Ventilation: LOC EXHST FOR CONFINED AREAS; GENL VENT FOR NORM USE; IF EXPOS
DOES EXCEED OCCUP EXPOS LMTS; USE A NIOSH/MSHA
Protective Gloves: RUBBER/POLYETHYLENE GLOVES.
Eye Protection: SAFETY GLASSES/GOGGLES W/SIDE SHIELDS.
Other Protective Equipment: APRON; IMPERVIOUS CLOTHING.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USER'S OF THE "L" VERSION OF CONSULT THE "LR"
VERSION FOR ADDITIONAL INFO(FP N). SPILL PROC: CLTHG AS APPROP; BRTHG OF VAPS
MUST BE AVOIDED; REMOVE & DISCARD CONTAMD CLTHG. WASTE DISP METH: FOR C
LEANING, TAKE PRECS AGAINST FIRE & PERSOVEREXP. OTHER PRECS: FOOD,
DRINK/TOBACCO IN AREAS WHERE THEY MAY BECOME
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NIL @78F
Vapor Density: >1
Spec Gravity: 2.5 (H*2O=1)
PH: ING 9
Solubility in Water: NIL
Appearance and Odor: DARK GREY PASTE W/LOW ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT; OPEN FLAME.
Materials To Avoid: CAN REACT VIGOROUSLY WITH STRONG OXIDIZING AGENTS & MINERAL
ACIDS.
Hazardous Decomposition Products: OXIDES OF CARBON, ALDEHYDES AND ACIDS FROM
INCOMPLETE COMBUSTION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: HEAT IS GENERATED WHEN BASE IS MIXED
W/SOLIDIFIER-USE CAUTION.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: IPI-ULTRAMETAL MT-400, BASE
Company: INTEGRATED POLYMER INDUSTRIES
Street: 29734 AVIENDA DE LAS BANDERAS
City: RANCHO SANTA MARGARITA CA
Zipcode: 92688-2606
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 12/06/1994
Status Code: C
Label Date: 12/06/1994
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN/EYE: MILD IRRITATION. CHRONIC:
APPROXIMATELY 1% OF WORKERS ARE POTENTIALLY SKIN SENSITIZABLE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.