PALCO PRECISION ALLOY CO -- PALCO 620
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWNFF
MSDS NAME: PALCO 620
Responsible Party
Name: PALCO PRECISION ALLOY CO
Address: ROUTE 1 BOX 37
City: SCOTTOWN OH 45678
Info Phone: 614-886-8900
Emergency Phone Number: 614-886-8900
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PALCO PRECISION ALLOY CO
Address: ROUTE 1 BOX 37
City: SCOTTOWN OH 45678
Phone: 614-886-8900
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ELECTRIC ARC WELDING, BRAZING OR SOLDERING MAY CREATE ONE
OR MORE OF THE FOLLOWING HEALTH HAZARDS: FUMES & GASES CAN BE DANGEROUS
TO YOUR HEALTH. SHORT-TERM OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA OR DRYNESS OR IRRITATION OF NOSE, THROAT
OR EYES. ARC RAYS CAN (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: INJURE EYES & BURN SKIN.
ELECTRIC SHOCK CAN KILL. HEAT RAYS (INFRARED RADIATION FROM FLAME OR HOT
METAL) CAN INJURE EYES.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE
AMERICAN RED CROSS. INGEST: CALL MD IMMEDIATELY (FP N). INHAL: REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPI RATION) (FP N).
EYES: IMMEDIATELY FLUSHW/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK
ASSISTANCE FROM MD (FP N). SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD
(FP N).
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: READ & UNDERSTAND MFR'S INSTRUCTIONS
& PREC LABEL ON PROD. SEE AMERICAN NATL STD Z49.1, "SFTY IN WELD &
CUT" PUBLISHED BY AMERICAN WELDING SOCIETY.
Other Precautions: TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS AND TO
INSULATE HIMSELF/HERSELF FROM WORK AND GROUND.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NON FLAMMABLE
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). NON FLAMMABLE: WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES.
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE
OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TL V.
Ventilation: USE ENOUGH VENT, LOC EXHST AT ARC (OR FLAME) OR BOTH TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & THE
Protective Gloves: WELDER'S GLOVES.
Eye Protection: WEAR HELMET/USE FSHLD W/FILTER
Other Protective Equipment: WEAR HAND, HEAD & BODY PROT WHICH HELP PVNT INJURY
FROM RADIA, SPK & ELEC SHOCK. SEE Z49.1. AT MINIMUM, INCL
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). HAZ DECOMP PRODS: WELDED/BRAZED, PROCESS,
PROCEDURE & FILLER METAL USED. OTHER CNDTNS WHICH INFLUENCE COMPOSITION
& QTY OF FUMES & GASES TO WHICH WORKERS EXPOSED INCL: COATINGS ON
METAL BEING WELDED (SUCH AS PAINT, PLATING OR
=======================================================
Physical/Chemical Properties
=======================================================
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: WELDING & BRAZING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY ARE DEPENDENT UPON METAL BEING (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PALCO 620
Company: PALCO PRECISION ALLOY CO
Street: ROUTE 1 BOX 37
City: SCOTTOWN OH
Zipcode: 45678
Health Emergency Phone: 614-886-8900
Label Required IND: Y
Date Of Label Review: 12/21/1994
Status Code: C
Label Date: 12/21/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: ELECTRIC ARC WELDING, BRAZING OR SOLDERING MAY
CREATE ONE OR MORE OF THE FOLLOWING HEALTH HAZARDS: FUMES & GASES CAN BE
DANGEROUS TO HEALTH. SHORT-TERM OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEAOR DRYNESS OR IRRITATION OF NOSE, THROAT
OR EYES. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
HEAT RAYS (INFRARED RADIATION FROM FLAME OR HO T METAL) CAN INJURE EYES.
CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.