ADHESIVE TECHNOLOGY CORP 87 -- ANCHOR-IT, PART B HARDENER 200-R
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWNVX
MSDS NAME: ANCHOR-IT, PART B HARDENER 200-R
Kit Part: Y
Responsible Party
Name: ADHESIVE TECHNOLOGY CORP 87
Address: 8041 S 228TH SUITE 101
City: KENT WA 98032
Info Phone: 206-850-2400
Emergency Phone Number: 206-850-2400
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ADHESIVE TECHNOLOGY CORP
Address: 4210 B STREET N.W. SUITE D
City: AUBURN WA 98001
Phone: 206-850-2400
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CONTACT WITH SKIN WILL CAUSE SEVERE BURNS. AVOID BREATHING
VAPORS. USE PROTECTIVE CLOTHING, GLOVES AND GOGGLES AT ALL TIMES. AVOID ALL
CONTACT WITH SKIN AND EYES.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INGEST:CALL MD IMMEDIATELY (FP N). SKIN:WASH WITH WATERLESS HAND
CLEANER THEN WARM SOAP AND WATER FOR 15 MINUTES, THEN APPLY A PROTECTIVE
CREAM. INHAL:REMOVE TO FRESH AIR. EYES:CALL PHYS. FLUSH WITH W ARM WATER FOR
@ LEAST 15 MINUTES. CLOTHING:REMOVE CONTAMINATED CLOTHING IMMEDIATELY, AND
WASH SKIN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEAN UP WITH ABSORBENT MATERIAL. WASH AREA WITH
WARM, SOAPY WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N).
Handling And Storage Precautions: NONE SPECIFIED BY MANUFACTURER.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 200F,93C
Extinguishing Media: FOAM, CO*2, FOG.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: DO NOT MIX OR STORE WITH STRONG OXIDANTS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N).
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGG (SUPDAT)
Other Protective Equipment: USE PROTECTIVE CLOTHING. EYEWASH FOUNTAIN & DELUGE
SHOWER MEETING ANSI DESIGN CRITERIA (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: EYE PROT:& FULL LENGTH FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Evaporation Rate & Reference: NOT KNOWN
Solubility in Water: VERY LOW
Appearance and Odor: DARK GREEN/BLACK PASTE
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ANCHOR-IT, PART B HARDENER 200-R
Company: ADHESIVE TECHNOLOGY CORP
Street: 4210 B STREET N.W. SUITE D
City: AUBURN WA
Zipcode: 98001
Health Emergency Phone: 206-850-2400
Label Required IND: Y
Date Of Label Review: 01/27/1995
Status Code: C
Label Date: 01/27/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:CONTACT WITH SKIN WILL CAUSE SEVERE
BURNS. CHRONIC:NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.