===================== Product Identification =====================
MSDS NAME:EPOXY RESIN
NIIN:00N019439
MSDS Number: BLGQH
=== Responsible Party ===
Company:TACC INTERNATIONAL CORP
Address:AIR STATION INDUSTRIAL PARK
Box:390
City:ROCKLAND
State:MA
ZIP:02370
Country:US
Info Phone Num:617-878-7015
Emergency Phone Num:617-878-7015
CAGE:0HZU1
=== Contractor Identification ===
Company:TACC INTERNATIONAL CORP
Address:AIR STATION INDUSTRIAL PARK
Box:City:ROCKLAND
State:MA
ZIP:02370
Country:US
Phone:781-878-7015
CAGE:0HZU1
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN (BISPHENOL A EPOXY RESINS)
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 30-39%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:AVOID BREATHING VAPOR, MIST OR
SPRAY IN CONTAINER HEADSPACE. SKIN:MAY CAUSE SENSITIZATION (RASHES
OR HIVES). EYE:MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN OR LUNG ALLERGIES
MAY INCREASE THE CHANCE OF DEVELOPING INCREASED ALLERGY SYMPTOMS
FROM EXPOSURE TO THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE TO FRESH AIR. SKIN:WASH WITH SOAP & WATER, APPLY
A MILD SKIN CREAM. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES,
CALL MD. INGEST:DO NOT INDUCE VOMITING. CALL POISON CONTROL CENTER.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:490F,254C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:DO NOT SPRAY A SOLID STREAM OF WATER OR FOAM
DIRECTLY INTO A POOL OF HOT, BURNING LIQ; MAY CAUSE FROTHING. WEAR
NIOSH/ MSHA APPRVD SCBA & FULL PROT EQUIP
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURES MAY CAUSE
INSTABILITY. DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SHOVEL INTO CLOSED
CONTAINERS. FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL DRY AREA IN CLOSED
CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED MASK. NIOSH/MSHA APPROVED
SCBA IN HIGH VAPOR CONCENTRATIONS.
Ventilation:SUFFICIENT TO KEEP WORKROOM CONCENTRATION BELOW TLV.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES, MAY(SUPP DATA)
Other Protective Equipment:BARRIER CREAM FOR SENSITIVE SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT:ADD FULL LENGTH FACESHIELD TO GOGGLES .
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.17
Solubility in Water:NIL
Appearance and Odor:SILVER, TYPICAL ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, AMINES, AMMONIA, ACIDS, HALOGENS, ANHYDRIDES, STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES. ALIPHATIC
POLYAMINES CAN PRODUCE EXOTHERMIC REACTIONS. AVOID BREATHING FUMES.
Hazardous Decomposition Products:CO, CO2, ALDEHYDES.
Conditions to Avoid Polymerization:AMINES, ALKALIES, MINERAL ACIDS,
METAL SALTS, STRONG ACIDS OR BASES IN BULK.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
BEXANE PT B, 4032
| 111-40-0
112-24-3
112-57-2 |
|
CUT-THRU, 1740
| 5989-27-5
107-41-5 |
|
WHITE GELCOAT, GV42000
| 100-42-5
13463-67-7
14807-96-6
112945-52-5
80-62-6
105-45-3 |
|
BIOGUARD BALANCE PAK 200
| 497-19-8 |
|
BIOGUARD SPA PH INCREASER
| 497-19-8 |
|
BIOGUARD SPA PH DECREASER
| 7681-38-1 |
|
BIOGUARD LO'N SLO
| 7681-38-1 |
|
BIOGUARD SPA POLISH
| 57-55-6
102-71-6 |
|
DURA SLIDE LUBRICANT AEROSOL
| 106-97-8
79-01-6
71-55-6 |
|
NAVOSOL 300
| 64742-95-6 |
|
AMMONIUM SULFATE
| 7783-20-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 75-28-5
74-98-6
8052-41-3
64742-95-6
75-09-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH,GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
FLEXGEL, 103919387
| 64741-88-4 |
|
NATURAL OIL FINISH SUPER BUILD, SB 66
| 8052-41-3 |
|
LIQUID PLASTIC EXT SUPER BUILD, SB 92
| 8052-41-3
71-36-3
64742-81-0 |
|
SYNKO TUFF PATCH SMOOTH AND TEXTURED, 380
| 85-68-7 |
|
MANCHEM APG
| 125904-15-6
57-55-6
7647-01-0 |
|
WATER-BORNE TRAFFIC PAINT-WHITE
| 1317-65-3
64-17-5
67-56-1
57-55-6
13463-67-7
14464-46-1 |
|
SUM KOOL
| |
|
NATROSOL
| 5989-27-5
26027-38-3 |
|
13600 CUPRIC OXIDE
| 7440-50-8 |
|
LUBRICATING AGENT 2970
| |
|
GV-55313 BURNT SIENNA POLYPASTE
| |
|
DAP WELDWOOD ORIGINAL CONTACT CEMENT
| 71-55-6
64742-89-8
108-88-3 |
|
PK-7535 RED CHEM-O-SOL
| 1309-64-4 |
|
R3580 YELLOW CHEM-O-SOL
| 117-81-7 |
|
RED-Z
| 7778-54-3
9003-04-7 |
|
TRU-TEST SUPREME WOODSMAN SANDING SEALER, 0
| 64742-47-8
8032-32-4
557-05-1 |
|
KWIK KLEEN
| 7647-01-0 |
|
KEROSENE (TAC)
| 8008-20-6 |
|
GLO-COAT, 10110-58-59
| 111-90-0
8002-74-2
7732-18-5 |
|
PIGMENTED OIL WALLBOARD SEALER, TT-S-179B
| 8052-41-3 |
|
SLM-ST SILVERMASTER STABILIZER, 60-18609-00
| |
|
ED-305L
| |
|
PROFORMER
| 1330-20-7
14464-46-1
71-55-6 |
|
TURBO T OIL 100, 65607
| 64742-54-7
64742-70-7
64742-57-0 |
|
GALVAPREP 5
| 13598-37-3
13138-45-9
7697-37-2 |
|
T-64P TONER FOR COPIER BD-7610
| 9003-07-4
1333-86-4
24937-78-8 |
|
ION-420/LC
| |
|
POLYESTER RESIN R88-27 SURFACING RESIN (SUP
| 100-42-5 |
|
EPOXY RESIN
| 25068-38-6 |
|
OROSENE 999 BRIGHTENER
| 14931-83-0
34831-03-0 |
|
ARDROX 6440
| |
|
COPPER OXIDE
| 7440-50-8 |
|
ACRYLIC SEALER 561, ASL 010
| 64741-41-9
1330-20-7 |
|
|