===================== Product Identification =====================
MSDS NAME:PIGMENTED OIL WALLBOARD SEALER, TT-S-179B
NIIN:00N019421
MSDS Number: BLGPV
=== Responsible Party ===
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 S 133RD ST
City:TUKWILA
State:WA
ZIP:98168
Info Phone Num:206-244-8844
Emergency Phone Num:206-941-1612
CAGE:2F266
=== Contractor Identification ===
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 S 133RD ST
City:TUKWILA
State:WA
ZIP:98168
Country:US
Phone:206-244-8844
CAGE:2F266
Company:FARWEST PAINT MANUFACTURING CO
Address:4522 SOUTH 133RD ST
Box:City:TUKWILA
State:WA
ZIP:98168
Country:US
Phone:206-244-8844
CAGE:6F266
============= Composition/Information on Ingredients =============
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 30-35%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293
Name:RESP PROT: SHOULD BE IMPLEMENTED TO REDUCE EXPOSURE.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE SEVERE IRRIT, REDNESS,
TEARING, BLURRED VISION. SKIN: PRLNGD/RPTD CONT CAN CAUSE MODERATE
IRRIT. DEFAT, DERM. INHAL: EXCESSIVE INHAL OF VAPS CAN CAUSE NASAL
& RESP IRRIT, DIZZ, WEAK, F ATIGUE, NAUS, HDCH, POS UNCON, & EVEN
ASPHYXIATION. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT, & (SEE EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DIARRHEA. ASPIR OF MATERIAL INTO
LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN: THORO WASH EXPOSED AREA W/SOAP & WATER. REMOVE CONTAM
CLTHG. LAUNDER CONTAM CLTHG BEFORE RE-USE. EYES: FLUSH W/LRG
AMOUNTS OF H2O FOR AT LEAST 15 MIN. LIFTING UPPER AND LOWER LIDS
OCCASIONALLY, GET MED ATTN. INGEST: DO NOT INDUCE VOMIT. KEEP
PERSON WARM, QUIET, AND GET MED ATTN. INHAL: REMOVE INDIVIDUAL TO
FRESH AIR. IF BRTHG IS DFCLT, ADMIN O2. IF BRTHG HAS STOPPED, GIVE
(SUPP DATA)
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:USE A NIOSH/MSHA APPROVED SCBA WITH FULL
FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
CUTTING TORCHES. DRUM (EVEN EMPTY) AND PRODUCT (EVEN JUST RESIDUE)
CAN IGNITE EXPLOSIVELY.
================== Accidental Release Measures ==================
Spill Release Procedures:SMALL: ABSORB LIQ ON PAPER, VERMICULITE, FLOOR
ABSORB, OR OTHER ABSORB MATL & TRANSFER TO HOOD. LRG: ELIMINATE ALL
IGNIT SOURCES (FLAKES, FLAMES INCLUDING PILOT LIGHTS, ELEC SPARKS).
PERSONS NOT WEARI NG PROT EQUIP SHD BE EXCLUDED FROM (SEESUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
(VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVE IN DATA
SHEET MUST BE OBSERVED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A NIOSH/MSHA APPROVED AIR SUPPLIED RESP IS
ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL. OSHA REGS ALSO
PERMIT OTHER NIOSH/MSHA RESP UNDER SPECIFIED CNDTNS. (SEE YOUR SFTY
EQUIP SUP). ENGINEERIN G/ADMINISTRATIVE CONTROLS (SEE ING 2)
Ventilation:PROVIDE SUFFICIENT MECH (GEN &/OR LOCAL EXHAUST)
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE FROM LEAKS, &
SPILLS. ALWAYS WASH HANDS THORO W/SOAP & WATER BEFORE HNDLG FOOD &
DRINK.
Supplemental Safety and Health
FIRST AID PROC: ARTF RESP. KEEP PERSON QUIET & GET MEDICAL ATTN. SPILL
PROC: AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED. STOP SPILL
AT SOURCE. DIKE AREA OF SPILL TO PVNT RUN-OFF TO SEWERS, STREAM S,
OR OTHER BODIES OF H2O. IF RUN-OFF OCCURS, NOTIFY PROPER
AUTHORITIES AS REQD, THAT A SPILL HAS OCCURED.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Density:HVR/AIR
Spec Gravity:1.2902
Evaporation Rate & Reference:70 (ETHER=1)
Appearance and Odor:VISCOUS LIQUID WITH A MILD, SWEET AROMATIC ODOR.
Percent Volatiles by Volume:<55
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES, SPARKS, AND
HEAT. DO NOT WELD NEAR OR AROUND PRODUCT.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
==================== Disposal Considerations ====================
Waste Disposal Methods:DESTROY BY LIQ INCINERATION. CONTAM ABSORB MAY
BE DEPOSITED IN LANDFILL IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
BEXANE PT B, 4032
| 111-40-0
112-24-3
112-57-2 |
|
CUT-THRU, 1740
| 5989-27-5
107-41-5 |
|
WHITE GELCOAT, GV42000
| 100-42-5
13463-67-7
14807-96-6
112945-52-5
80-62-6
105-45-3 |
|
BIOGUARD BALANCE PAK 200
| 497-19-8 |
|
BIOGUARD SPA PH INCREASER
| 497-19-8 |
|
BIOGUARD SPA PH DECREASER
| 7681-38-1 |
|
BIOGUARD LO'N SLO
| 7681-38-1 |
|
BIOGUARD SPA POLISH
| 57-55-6
102-71-6 |
|
DURA SLIDE LUBRICANT AEROSOL
| 106-97-8
79-01-6
71-55-6 |
|
NAVOSOL 300
| 64742-95-6 |
|
AMMONIUM SULFATE
| 7783-20-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 75-28-5
74-98-6
8052-41-3
64742-95-6
75-09-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH,GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
FLEXGEL, 103919387
| 64741-88-4 |
|
NATURAL OIL FINISH SUPER BUILD, SB 66
| 8052-41-3 |
|
LIQUID PLASTIC EXT SUPER BUILD, SB 92
| 8052-41-3
71-36-3
64742-81-0 |
|
SYNKO TUFF PATCH SMOOTH AND TEXTURED, 380
| 85-68-7 |
|
MANCHEM APG
| 125904-15-6
57-55-6
7647-01-0 |
|
WATER-BORNE TRAFFIC PAINT-WHITE
| 1317-65-3
64-17-5
67-56-1
57-55-6
13463-67-7
14464-46-1 |
|
SUM KOOL
| |
|
NATROSOL
| 5989-27-5
26027-38-3 |
|
13600 CUPRIC OXIDE
| 7440-50-8 |
|
LUBRICATING AGENT 2970
| |
|
GV-55313 BURNT SIENNA POLYPASTE
| |
|
DAP WELDWOOD ORIGINAL CONTACT CEMENT
| 71-55-6
64742-89-8
108-88-3 |
|
PK-7535 RED CHEM-O-SOL
| 1309-64-4 |
|
R3580 YELLOW CHEM-O-SOL
| 117-81-7 |
|
RED-Z
| 7778-54-3
9003-04-7 |
|
TRU-TEST SUPREME WOODSMAN SANDING SEALER, 0
| 64742-47-8
8032-32-4
557-05-1 |
|
KWIK KLEEN
| 7647-01-0 |
|
KEROSENE (TAC)
| 8008-20-6 |
|
GLO-COAT, 10110-58-59
| 111-90-0
8002-74-2
7732-18-5 |
|
PIGMENTED OIL WALLBOARD SEALER, TT-S-179B
| 8052-41-3 |
|
SLM-ST SILVERMASTER STABILIZER, 60-18609-00
| |
|
ED-305L
| |
|
PROFORMER
| 1330-20-7
14464-46-1
71-55-6 |
|
TURBO T OIL 100, 65607
| 64742-54-7
64742-70-7
64742-57-0 |
|
GALVAPREP 5
| 13598-37-3
13138-45-9
7697-37-2 |
|
T-64P TONER FOR COPIER BD-7610
| 9003-07-4
1333-86-4
24937-78-8 |
|
ION-420/LC
| |
|
POLYESTER RESIN R88-27 SURFACING RESIN (SUP
| 100-42-5 |
|
EPOXY RESIN
| 25068-38-6 |
|
OROSENE 999 BRIGHTENER
| 14931-83-0
34831-03-0 |
|
ARDROX 6440
| |
|
COPPER OXIDE
| 7440-50-8 |
|
ACRYLIC SEALER 561, ASL 010
| 64741-41-9
1330-20-7 |
|
|