===================== Product Identification =====================
MSDS NAME:13600 CUPRIC OXIDE
NIIN:00N019387
MSDS Number: BLGPG
=== Responsible Party ===
Company:AMERICAN CHEMET CORP
Address:400 COOK RD
Box:437
City:DEERFIELD
State:IL
ZIP:60015
Country:US
Info Phone Num:708-948-0800
Emergency Phone Num:708-948-0800
CAGE:3W085
=== Contractor Identification ===
Company:AMERICAN CHEMET CORP
Address:400 COOK RD
Box:City:DEERFIELD
State:IL
ZIP:60015
Country:US
Phone:708-948-0800
CAGE:3W085
============= Composition/Information on Ingredients =============
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 78%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NAUSEA, CHILLS, DIARRHEA. MAY CAUSE
RESPIRATORY IRRITATION; SKIN IRRITATION (OXIDE POX); FEVER, EYE
IRRITATION WITH REDNESS, PAIN AND CONJUNCTIVITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING LUNG DISEASE MAY BE
AGGRAVATED BY EXPOSURE. COULD RESULT IN RESPIRATORY DISEASE IF
OVEREXPOSED ON A CHRONIC BASIS.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. LAY PATIENT DOWN. COVER WITH
BLANKET. IF IRRITATED, FLUSH EYES AND SKIN WITH LARGE VOLUMES OF
FRESH WATER FOR AT LEAST 15 MIN. REFER TO PHYSICIAN. INGEST: GET MD
IMMEDIATLY .
===================== Fire Fighting Measures =====================
Extinguishing Media:WILL NOT BURN. EXTINGUISHING MEDIA SUITABLE FOR
SURROUDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP WITH VACUUM OR CONVENTIONAL TOOLS.
AVOID DUSTING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP LIDS TIGHTLY SEALED. STORE IN
COOL, DRY PLACE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED CONTACT WITH
SKIN. WASH WITH SOAP AND WATER AFTER CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:CARTRIDGE TYPE FILTER OR DUST MASK APPROVED BY
MSHA OR NIOSH. REFER TO RESPIRATORY PROTECTIVE DEVICES APPROVED BY
BUREAU OF MINES CIRCULAR IC 8436.
Ventilation:TO KEEP BELOW LISTED TLV IN INGREDIENT SECTION, USE GENERAL
DILUTION TYPE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVE SHIRTS IF CONTACT IS PROBABLE
AND SKIN IS SENSITIVE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS (STAB): HYDRAZINE AND ACETYLENE CARBIDE COMPOUNDS, ACIDS, BASES,
AND METALS SUCH AS BUT NOT LIMITED TO AL, MG, B, K, NU, TI, & ZR.
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2255F,1235C
Spec Gravity:6.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINELY DIVIDED POWDER. NO ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
CUPRIC OXIDE MAY REACT VIOLENTLY WITH STRONG REDUCTANT, E.G., ORGANIC
CMPDS, SUCH AS BUT NOT LIMITED TO (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COPPER FUMES WILL BE RELEASED IF
CUPROUS OXIDE IS HEATED ABOVE ITS MELTING POINT (2255 F).
==================== Disposal Considerations ====================
Waste Disposal Methods:APPROVED LANDFILL IF ALLOWED BY LOCAL, STATE AND
FEDERAL AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
BEXANE PT B, 4032
| 111-40-0
112-24-3
112-57-2 |
|
CUT-THRU, 1740
| 5989-27-5
107-41-5 |
|
WHITE GELCOAT, GV42000
| 100-42-5
13463-67-7
14807-96-6
112945-52-5
80-62-6
105-45-3 |
|
BIOGUARD BALANCE PAK 200
| 497-19-8 |
|
BIOGUARD SPA PH INCREASER
| 497-19-8 |
|
BIOGUARD SPA PH DECREASER
| 7681-38-1 |
|
BIOGUARD LO'N SLO
| 7681-38-1 |
|
BIOGUARD SPA POLISH
| 57-55-6
102-71-6 |
|
DURA SLIDE LUBRICANT AEROSOL
| 106-97-8
79-01-6
71-55-6 |
|
NAVOSOL 300
| 64742-95-6 |
|
AMMONIUM SULFATE
| 7783-20-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 75-28-5
74-98-6
8052-41-3
64742-95-6
75-09-2 |
|
VARATHANE PROFESSIONAL CLEAR FINISH, (SUPP
| 8052-41-3
64742-95-6
75-09-2
75-28-5
74-98-6 |
|
VARATHANE PROFESSIONAL CLEAR FINISH,GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
VARATHANE PROFESSIONAL CLEAR FINISH GLOSS,(
| 8052-41-3 |
|
FLEXGEL, 103919387
| 64741-88-4 |
|
NATURAL OIL FINISH SUPER BUILD, SB 66
| 8052-41-3 |
|
LIQUID PLASTIC EXT SUPER BUILD, SB 92
| 8052-41-3
71-36-3
64742-81-0 |
|
SYNKO TUFF PATCH SMOOTH AND TEXTURED, 380
| 85-68-7 |
|
MANCHEM APG
| 125904-15-6
57-55-6
7647-01-0 |
|
WATER-BORNE TRAFFIC PAINT-WHITE
| 1317-65-3
64-17-5
67-56-1
57-55-6
13463-67-7
14464-46-1 |
|
SUM KOOL
| |
|
NATROSOL
| 5989-27-5
26027-38-3 |
|
13600 CUPRIC OXIDE
| 7440-50-8 |
|
LUBRICATING AGENT 2970
| |
|
GV-55313 BURNT SIENNA POLYPASTE
| |
|
DAP WELDWOOD ORIGINAL CONTACT CEMENT
| 71-55-6
64742-89-8
108-88-3 |
|
PK-7535 RED CHEM-O-SOL
| 1309-64-4 |
|
R3580 YELLOW CHEM-O-SOL
| 117-81-7 |
|
RED-Z
| 7778-54-3
9003-04-7 |
|
TRU-TEST SUPREME WOODSMAN SANDING SEALER, 0
| 64742-47-8
8032-32-4
557-05-1 |
|
KWIK KLEEN
| 7647-01-0 |
|
KEROSENE (TAC)
| 8008-20-6 |
|
GLO-COAT, 10110-58-59
| 111-90-0
8002-74-2
7732-18-5 |
|
PIGMENTED OIL WALLBOARD SEALER, TT-S-179B
| 8052-41-3 |
|
SLM-ST SILVERMASTER STABILIZER, 60-18609-00
| |
|
ED-305L
| |
|
PROFORMER
| 1330-20-7
14464-46-1
71-55-6 |
|
TURBO T OIL 100, 65607
| 64742-54-7
64742-70-7
64742-57-0 |
|
GALVAPREP 5
| 13598-37-3
13138-45-9
7697-37-2 |
|
T-64P TONER FOR COPIER BD-7610
| 9003-07-4
1333-86-4
24937-78-8 |
|
ION-420/LC
| |
|
POLYESTER RESIN R88-27 SURFACING RESIN (SUP
| 100-42-5 |
|
EPOXY RESIN
| 25068-38-6 |
|
OROSENE 999 BRIGHTENER
| 14931-83-0
34831-03-0 |
|
ARDROX 6440
| |
|
COPPER OXIDE
| 7440-50-8 |
|
ACRYLIC SEALER 561, ASL 010
| 64741-41-9
1330-20-7 |
|
|